Using vb.net on an aspx code behind event, is there away to tell from a parent page if the child page popup is open, and then close the child page if it is truly open based on some event on the parent page, like clicking a gridview edit link, again?
View 1 RepliesI have 2 pages. parent.aspx and child.aspx. In parent.aspx, i use colorbox and send some value for the child.aspx to popup.
[code]...
child.aspx will popup and shows ASPxGridView base on the value passing from parent.aspx. User will select the data from ASPxGridView. the selected data need to send back to the parent page. I code it in child.aspx.vb page.My problem is how can i get the value from child.aspx.vb and pass it to parent.aspx ?
I have an aspx page with three web controls: one to control the List Users page, one to control the Edit Users page, and one to control the Add User page. I have discovered a method for accessing these elements, but it seems to be limited. Here is what I have done:
Protected Sub editUser(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.GridViewEditEventArgs)
'set selected user from gridview.
[Code].....
This works in most cases. However, I am unable to access the "enabled" attribute of these web controls. Why is this, and how might I access that attribute?
I have a parent page and child page, both aspx. All is working, but now I would like to close child page, if user leaves child popup page and goes back to parent page and clicks on something else like page index of Gridview. I CANNOT close popup child page if user goes to another app, or some other location, I only want to close if something on parent page is changed.
I have the PageIndexChange Event set up for other purposes, I would just like to add some functionality, perhaps a script manager to close the child popup page if the Gridview index is changed, java or another way which ever works best.I think I might also need to check if the child page is even open.
[Code]...
I have a popup aspx page that receives data from a parent page gridview Edit click. There is a great deal of parsing of data from parent page to pop up as the data is being translated in pop up, then sent back to parent page to be reassembled in the original text block before update.
When the popup passes the data back or is canceled, the parent page gridview is still in Edit mode.I would like to pass the Cancel or Update button click from the popup to the parent page gridview so it can complete the update or cancel event without asking the user to click the corresponding command button link from the gridview edit mode, to Update or Cancel.
UPDATE: There is also a jquery UIBlocker on the Parent page to prevent the user from returning to the page until the PopUp page processing has been completed. Below is the critical code:
PARENT Page:
function parentFunc(a) {
// Unblocks on return from popup page.
$.unblockUI({});
[code]...
Had a problem with preventing the popup from reloading. So there is an if condition in the load event. A dynamic number of controls are built on the popup as literals. So the Page Init event and Page Load event fire on non Postback to rebuild the controls.
Trying to access a property from the parent page on my user control.
Here's the start of my default.asp codebehind:
Partial Class _Default
Inherits System.Web.UI.Page
Private _selectedID As String = "74251BK3232"
[Code].....
I'm getting the error "selectedID is not a member of System.Web.UI.Page"
im trying to make a popup blocker type message box that pops up when a popup tries to load a page, and it asks The page [URL]is trying to open,open in a new tab?
(label)
No (button) Yes (button)
how would i make a menu appear when i click somwhere on the page,how would i make it recognise a picture, and be able to copy it to a location on the local drive?
I have an ASP.NET page (WebForm) on which I set the content of a central DIV by dynamically loading one of five user controls during Page_Load, dependant on the stage of the application.
One of the user controls contains radio buttons and a text box together with a submit button. What I want to do is process that information when the form is posted using the submit button.
I could do this with an AJAX call using jQuery, but I don't really want to do that, so I'm trying to access the form data on postback, but on page load following the postback the data is not present in the Request.Form object.
Looking at what I need to do it seems pretty simple and I'm sure is once you've got your head around it, but I can't find out how to carry this out. Some of the things I have read refer to event bubbling, but that doesn't make too much sense in this scenario.
EDIT: To clarify, I want to post the page back to itself to capture the values from the form elements via the Request object, store them in the database, and then display a confirmation message (or something else) on postback, and not re-display the same control again. So I won't be loading the same user control again.
I have a simple user control which wraps some logic around an AutoCompleteBox. This question could apply to any ItemsControl control like a dropdown or listbox though.
<UserControl>
<Grid Background="White">
<sdk:AutoCompleteBox Name="myACB" ItemsSource="{Binding myData}" />
[code].....
I have a form with a Tab Control that has 18 pages. When I click on a tab it opens the page and select a textbox on that page (txtTextbox1. Select() ). This works for the first 8 pages but not for the remaining 10 pages. Although on these pages I can mouse click on the textbox, enter info, save then click my Add button that clears the textboxes and has the code (txtTextbox1. Select() ). The textbox is selected just fine. The code for all my pages is the same except for the tab name and the control names. The tab key will move the selection to the next textbox in order on all pages and the Enter key is coded to do the same. The first 8 pages have a total of 256 labels, buttons, list boxes, textboxes and checkboxes on them.
View 10 RepliesI have a user control that checks if a certain query string and session value are present then returns a boolean based on that, if it's true I want to set the master page. The page is throwing an Object reference exception when it tries to call the method EditUser1.UserAuthorization(). Why is this happening? I imagine that the method doesn't exist at that point in the stack. Protected Sub Page_PreInit(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.PreInit
[Code]...
I want to show default page in fckeditor on page load but but I am not able to this.[code]...
View 1 RepliesI want to access a page variable from a user control placed on that page. All the solutions work in C# via casting to the page class. The problem is that this doesn't work in VB. The page class is not selectable from the Intellisense dialog. Manual typing results in the error type not defined. It is strange that C# can do this without a problem. What is the proper solution for this in VB? I had other cases where I needed to access a control on the main page. C# again uses a cast to the page class to access the control. This doesn't work in VB again. So how can I access the page class from a user control in generell?
View 5 RepliesI am using <%@ MasterType virtualpath="~/__.Master" %> to embed my master page content into child page to access control belong to Master Page. I have one DropDownList in Master page. And I want to access its SelectedValue in my Child Page.
Problem is when page first time loads and as I am trying to access DropDownList's Selected Value by writing in child Page - "Master.DropDownList.SelectedValue". I am not able to get DropDownList's Value. Its display's Blank.
But When Page.IsPostBack I am able to get SelectedValue of that DropDownList.
I have a text input in textbox1 in tab page 1 and i want that text from textbox1 will be displayed in textbox2 in tab page 2.
View 3 RepliesI have an ASP.NET 3.5 page with some AJAX, some Validators and some business-rule validation done in the code-behind page (VB.NET).
The Validators set focus to the 'offending' control when an error is detected.
When a business rule is violated, I used the following code to generate some javascript "on the fly" and execute it to simulate the Winforms "MessageBox.Show" functionality:
Sub DisplayMessages()
Dim lblError As New Label
lblError.Text = "<script language='javascript'>" & Environment.NewLine & "window.alert('"
[Code]....
At the end of the "btnSave.Click" code, if everything went ok, calling that subroutine.
What I get is the page scrolling to the top and then back to where it was when the Save button was clicked.
For various reasons, 'MaintainScrollPositionOnPostback="True"' is in the Page directives at the top of the .aspx code. What I'd really like is to make that FALSE for just a moment so that the page resets at the top - again, only if everything is ok and only for this button (there are other buttons on the page that require the page to keep it's scroll position).
I wrote a page Page method in my aspx page. in web service method I need to call FindControl method return textbox and get text box value. But my findControl will take MasterPage object to iterate.
see my code
<script type = "text/javascript">
function ShowCurrentDateTime() {
$.ajax({
[Code]....
How to pass Master Page object or Page to Page method?. So I can use in Sared method.
Is there any way I can access Textbox value directly in Page method? I need access couple of controls in Page Method.
HOW TO RUN THE JAVASCRIPT FUNCTION ON PAGE ONLOAD EVENT IN CONTENT PAGE OF MASTER PAGE.? means i have masterpage and the content page of master page namely default.aspx in vb.net.i wanna run javascript function in Default.aspx and i have called the function body onload in master page.when i run my website it shows the error "" Microsoft JScript Runtime Error : Object Expected ""
View 4 RepliesI need sample vb.net code to save single windows form as many page and reload the page whenever i call that page...
View 1 RepliesI would like to know if there is some simple code to release a child control from it's parent control, without having to name the parent control. In pseudocode, I'm looking for something like this:
[Code]...
How can I get Webbrowser1 to navigate to each page and wait for the one page to completely load, then move to the next page...? [code]
View 3 RepliesI'm creating an application which retrived files from a protected web page. When connecting to the page, the login page popsup and cannot seem to pass the information to the boxes.[CODE...]
How to store cookies in vb so that I don't need to send the credentials everytime I retrive a file?
I have a master page which contains everything that inherits it within a form. A page inheriting from it needs to run some javascript to act on a text field on a page. However, I can't seem to reference that text field through the javascript, since the form begins on the master page. The following line will come up bogus: document.form1.txtFindUser.value = blah.responseText; This is because form1 is defined on the master page, while txtFindUser is on the current page.
View 3 Repliesi am new to this. i have 4 pages. login.aspx, account.aspx, settings.aspx and fliers.aspx.
its all programmed in vb.net with sql server backend.on my firstr page, login.aspx i have this code in the .vb page -
Dim SQL As String = "SELECT * FROM table1 WHERE email='" + Me.txtUserName.Text + "' AND password='" + Me.txtPassword.Text + "' "
ExecuteNonQuery(SQL)
[code]...
Does anyone know why a Page_Load would be called twice on a page when requesting an aspx page?I am using .Net 2.0 with the new .net 1.1 compilation model installed. Whenever I request a page, the Page_Load on the aspx page appears to be called twice, so does the Page_Load on and user controls added to that page.
View 16 RepliesFor example how do u delete on row <tr> in a table <table>?how do you remove a <img /> entry?
by remove means not just set the innerText to?
I have seen on a few applications where there is a Pop-up page that has Tab controls on it with an several buttons on the bottom for Ok, Cancel and Help. These three buttons are on all 6 Tabs, but I don't think they actually have different button clicks for each tab. How does one have these three button on all the tabs but without having to have separate clicks statements.
View 2 RepliesUsing ASP.Net, VB.Net When i close or exit the page, it should show the pop up message like "page closing"
View 4 RepliesThe thing is i have a Master page and a Content Page. I have a LoadComplete in Content Page and a PreRender in Master Page. The problem is one of my htmlcontrols on content page i change on the LoadComplete event server side of the content page. I also have some code for disabling controls on the Master Page PreRender event. For some reason all controls on the aspx side go through the Master Page prerender except the ones that i change on the LoadComplete side. How can i make sure the entire content page loads and then the Master Page PreRender event is called, making all the controls go through that event.
View 1 RepliesI have a problem I am trying to set the parent textbox from the modal popup.
Although I found the control from the modal popup with the below code
DirectCast(Parent.Page.Form.FindControl("ContentPlaceHolder1").FindControl("myAccordion").FindControl("txtTo"), TextBox).Text = str
This is being called on button click when the user has finished selecting from the Checkboxlist.
When the parent page is shown again though the textbox is empty.
The scenario of my user control is that a user is to select from a checkbox list which is a list of emails.
When done has been clicked then it is required that the selected emails be forwarded to the parent webpage.
Then the To Textbox in this case will be filled with the emails that the user has selected.