Is it possible to programmatically convert the name (not the value!) of a property to a string? I am using reflection to go through the various properties of a class giving their names as string inputs such as[code]...
View 4 RepliesI'd like to convert a string which contains a decimal number into string that contains the binary value, the octal and the hexadecimal value of that decimal number.Afterwards I also like to convert a string containing a binary, octal and hexd. number into a decimal string.Basically I'm looking for the functions:
dec2bin
dec2oct
dec2hex
bin2dec
oct2dec
hex2dec
I'd not prefer to rewrite a function, I'm sure the framework must have these functions already.
Whats the best way to convert a list(of string) to a string with the values seperated by ,
View 3 RepliesIs there any way to convert null terminated string to normal string.I mean I can easily make a program to find the location of vbnull but there has to be a built in function for that.
View 1 RepliesI need to convert a string array into a very long string with following requirement:
can not using any character escaping can not using XML can not using single character as separator (e.g. comma or space as separator)
how can i convert these datatypes: date to string and integer to string.Because it must be in a string datatype when I display it in a datetimepicker and textbox.
View 3 Replieshow I can convert an RTF String to a regulat text string. The rtf string has tons of formatting info, but all I need is the text in the string.
View 5 RepliesCurrently, I'm using the following code to pull info from the management class.
[code]...
I'm also pulling info from the bios, disk drives, video, etc. What I've noticed, is although it runs fine on my pc, it may error out on some pcs since it is hardware dependent.I'm having trouble implementing a check to find if it exists before I convert to a string and add it to my overall string.
I'm working on a mass text replacer program because I'm sick of all the 10-day trial ones out there that aren't very good.The entire program is basically finished (All easy stuff), but now I need to code the actual replace/delete stuff, which I'm stuck on because apparently the way I originally intended to do it is not possible.
The way it works is you load a text file (.txt, .cfg, .ini, .doc, etc.) which opens a StreamReader which writes all the data into a listbox. Then you pick whether you want to replace or delete a string. If you select replace, then you enter the string to search for and in another textbox you enter the string to replace it with.
The way I originally intended to do this was like this:
If o1.Text = "Replace" Then 'The option
Replace(txtfile, str1, a1) 'txtfile is the data, str1 is the string to find and a1 is the replacement
End If
The problem is, I believe this method requires txtfile, str1 and a1 to be strings, but they're all 1-dimensional string arrays, which cannot be converted to strings, or at least I don't know how to convert them.
A friend told me one way I could do this is to open both a StreamReader and StreamWriter and do the replace/delete line by line as they are entered into the memory and write them to a temporary file which is then copied over the original. I can do this kind of, but I still don't know the proper way of doing the actual replace code because the string to find and the string to replace with are still 1-dimensional string arrays rather than strings.
Dim namelist As List(Of String) = New List(Of String)
namelist.Add("Hi")
namelist.Add("Hello")
[code].....
I have the following code...
Const ToAddress As String = username.Text & "url..."
which sets to ToAddress to be used in on my Net.Mail.MailMessage that is to be created with the following constructor
Dim mm As New Net.Mail.MailMessage(username.Text, ToAddress)
which takes in a string and a constant string. But I get an error here[url]...
I have a function that takes string array as input..I have a string to process from that function..
Dim str As String = "this is a string"
func(// How to pass str ?)
Public Function func(ByVal arr() As String)
[code]....
I have also tried :
func(str.ToArray) // Give error since it converts str to char array instead of String array.
I'm using a 3rd party software to bind my control properties to server data. The call to bind the data needs the control and the name of the property as a string. For example... BindData(mytextbox, "Text", DataToBind) Some of the properties I am binding to are custom properties of a UserControl I am building, and as development goes, the property names sometimes change. Currently I have to hardcode the property names and if I change the property name, even though the IDE makes the change in all of the property references, I still have to go back and change the name in a dozen or so places. I would like to do the following....
[Code]...
I have class (Class A) with two prop as Name and Age.
And I am creating the instance to that class as
Dim strPropertyname as string="Name"
Dim objClass as New ClassA
How can I set the Property as
[Code]....
To be able to sort a dictionary by value I'm using this code:
Dim idCurrentJobs As IDictionary(Of String, Int32) = New Dictionary(Of String, Int32)
'The string in the dictionary represents a jobname and the integer is a counter for how many jobs im currently are running in the application'
idCurrentJobs.Add("JobName1", 2)
[code]....
MyProperty is just a property defined in another class. However when I try to reference that property as shown below I get an 'Identifier expected' error
This works:
TDTL.DataTopLevel(FileNumber).DataSet(FileDataSetNumber).MyProperty = TempVar
This does not work:
dim poo as string= "MyProperty"
TDTL.TireDataTopLevel(FileNumber).TireDataSet(FileDataSetNumber).(poo) = TempVar
I have a function that updates a Client in the database. A client object is passed in, along with a string array of fields/properties that should be updated. I need a way of accessing each property in the client object, based on what is in the array. Basically, I am looking for the VB .NET equivalent to this javascript:
var fields = ["Firstname","Lastname","DOB"];
for(field in fields)
{
[code]....
In my EF4 EntityModel I have an entity named Users. Users have the common UserName and Password string fields. If I do something like this
Dim u as new USERS
U.UserName = String.Empty
Then U.UserName are still Nothing.
But if I Do Something like this
Dim u as new USERS
u.UserName = "A"
u.UserName = String.Empty
Then U.UserName take String.Empty as value without problem.
The reason is the way that EF4 generate the UserName Property
Public Property UserName() As Global.System.String
Get
Return _UserName
End Get
[Code] .....
I do not want to make two assignations every time I want to set string.empty to a property with a nothing value, and I do not want to remember that I must do it in this way everytime, because I'm pretty sure that I will forget it and then I will introduce bugs in the code. I just want to assign the empty.string value to a property and the property take "" as value.
Say I wanna bind to dictionary that TKey is string with XAML:<Label DataContext="{MyDictionary}" Content="{Binding Item("OK")}" />Doesn't work.How should I do it?
View 1 RepliesI've created some classes that will be used to provide data to stored procedures in my database. The varchar parameters in the stored procs have length specifications (e.g. varchar(6) and I'd like to validate the length of all string properties before passing them on to the stored procedures.
Is there a simple, declarative way to do this?
I have two conceptual ideas so far:
Attributes
public class MyDataClass
{
[MaxStringLength = 50]
[Code]....
This seems like a lot of work and will really make my currently-simple classes look pretty ugly, but I suppose it will get the job done. It will also take a lot of copying and pasting to get this right.
I'm setting up a simple helper class to hold some data from a file I'm parsing. The names of the properties match the names of values that I expect to find in the file. I'd like to add a method called AddPropertyValue to my class so that I can assign a value to a property without explicitly calling it by name.The method would look like this:
//C#
public void AddPropertyValue(string propertyName, string propertyValue) {
//code to assign the property value based on propertyName
}
'VB.NET'
[Code]...
Is this possible without having to test for each individual property name against the supplied propertyName?
We have an object with properties, and a a SQL database we're reading in, to create a list of objects, with columns corresponding to each property.if a column is missing from the database (e.g. caused by an outdated version of the database), we want to assign a default value to it.I've created a dictionary, mapping the column name to its default value (both strings).However, I was wondering if it was possibly to somehow convert the column name (string) to an object property (e.g. the string "name" to AnObject.name?), as the property and column name are generally the same.I tried to use GetType().GetPropert("column name"), but I can't seem to do assignments through that)Alternately, is it possible to somehow create a dictionary, storing the object property as the key (and the column name and default value in a struct), and then grabbing it after.?
View 1 RepliesI am trying to make an app that interfaces with Salesforce. Now within salesforce you can customize your database to have any tables or fields that you want/need What I am trying to do is once I do my query, salesforce has your query results returned as a salesforce object. My app basically manages info in salesforce based on rules, sometimes people may need to customize those rules based on fields in the database, however because I dont know what kinds of fields are in their particular database I need to do it programatically...
SO what I want to do is reference the objects property via a string text property name... i.e. if they use a field called "IsFromLebanon" as a boolean I want to be able to access QueryResult.IsFromLebanon. but since I dont know if that field exists or not I dont know how to access its property without spelling out each time. I know clearly thats not going to work, but I dont know how to access the property name without KNOWING the property is going to be there, does that make sense? I dont know if I am making sense or not, it makes perfect sense in my head
I have created a new class with a string property called "Text".
The property will hold a sentence typed by the user.
I use "KeyPress" event to get the character pressed and use "Console.Text = Console.Text & e.KeyChar" to update the property. Where console is an instance of the class.
The problem is when I press "Delete" nothing happen.
That's the code within the event scope
MsgBox(Asc(e.KeyChar))
Console.Text = Console.Text & e.KeyChar
MsgBox(Console.Text)
Value of type 'System.Func(Of String, String)' cannot be converted to 'System.Converter(Of String, String)
Why? They are both effectively a function pointer (or delegate?) to a function that accept a string and return a string.
I'm having some very weird issues with interfaces right now.
I have a very simple setup. In one of my class, I have a Property implementing a Property from an Interface.
In my class it's like:
Private _oForm As IForm
Public Property Form As IForm Implements IContainer.Form
Set(value As IForm)
[Code]...
I have like dozens of interfaces like this working throughout my project and I can't believe this simple one can't work!
I am a newbie at ASP.net and after using sqldatasource with a listview to insert and show results from an SQL server db I want to try using the LINQ datasource since it seems to be more flexible in codebehind.
My problem is this: I droped a listview control to the page and I created the Linq datasource in codebehind with vb. the issue that I am having when I ..Select d.columms name i get the error system.string does not contain a property with the name "columname".. if i ommit the column name then its works fine.. the funny part is the d.count works fine but after that i get the error.. please see my code below:
[Code]...
b.dbMake needs to work so that i can use Distinct ,, ia m using asp.net version:3.5 and IIS version 7.0 ..
not sure what i am missing ,, but i did try alot of approaches,,1- checked the web.config file and it seems to have two assemblies and two namespaces for LINQ..2- used different databinding syntaxs,,and i searched a lot for the solution.. the last one i read the person ommited the name of the column,, i thought that wasnt the best solution.. also my dbMake column is comming up in the "intellisence"
I have created a class that contains a property array, but I cant use the setters and getters.
[Code]...
I have in my My.Settings four settings [code] now I want to get the value of the current setting from the My.Settings.SettingName. [code]
View 1 RepliesI have been given the task of debugging someone else's program. It previously ran flawlessly on a 32-bit Windows XP system, but now we are steadily switching over to 64-bit systems and this program has "spit the bit" so to speak.
This is App.Config.xml
Code:
<configuration>
<appSettings>
[Code] .....
The problem is I don't know my alternatives are. System.Configuration.ConfigurationMananger.AppSettings doesn't work.
I've tracked the problem to the last line Con.Open().
Code:
Public Function get_quotes(ByVal strDBConnection As String) As DataSet
Dim con As SqlConnection = New SqlConnection(strDBConnection)
Dim strQuery As String = "SELECT qmpQuoteID FROM Quotes"
Dim da As New SqlDataAdapter(strQuery, con)
Dim dsQuotes As New DataSet("quotes")
Try
con.Open()
The error is "The ConnectionString property has not been initialized."