I'm using XP and access 2003 and visual studio 2005. I created a project and connect this project with database access file. and I created some textboxes and command button on the form. Is possible to modify and add a new record to the database without using the navigation toolbar by insert a code in the command button.
View 1 RepliesI have created an application that has a webbrowser, two radioButtons, button1, and a menustrip.The menustrip has two main heading and under each heading are about 15 Tool Strip MenuItem. The ToolStripMenuItem properties are set to CheckonClick and an example of forum1. vb code for this section of the application is:[code]What I need is for the user to be able to add his/her own ToolStripMenueItems to those already present, along with the base url.So that clicking Button1 sends them to the base url And also have the Radio Buttons automatically add the extensions to the base url when the RadioButton is clicked.They need to be able to do this from the application itself.But I'm not sure how to code this in.They will not have VB to make modifications.
View 1 Repliesi want to modify the data into the access database using vb.net 2008.
View 8 RepliesI'm working on a VB.Net Windows form that is supposed to manipulate an Access Database. I can Already read data from the database (placing them in a combobox) using the following:
Code:
Private Sub Form2a_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
OpenFileDialog1.FileName = ""
OpenFileDialog1.Title = "C# Corner Open File Dialog"
[code]....
I'm trying to remember how to insert data in to a table. Here is my code
Code:
I get the error
Quote:
Number of query values and destination fields are not the same.
I also get some error about the Insert INTO part not being right somewhere. Am I doing this how you would do it, or how would you do something like this?
Using Access I created a few Data Access Pages. These web pages, once opened, work fine to manipulate data as intended, but they keep generating annoying warning messages.There are two messages that pop up every time the web page is accessed. Before the page opens the first message that pops up states: "This website uses a data provider that may be unsafe. If you trust the website, click OK, otherwise click cancel."After pressing OK on the first, the second message pops up and states:"This website is using your identity to access a data source. If you trust the website, click OK, otherwise click cancel."After pressing OK on both messages the page functionality works just fine.I've tried adding password protection to the database and even signing the project with a digital certificate, but I still get the warning messages. This would be fine except there are multiple end users for the access pages and I am trying to avoid the additional confusion this will create, especially since IT has restricted many of the users from editing the internet options.
View 1 RepliesSee our Posting Guidelines for our policy on archived threads.I am confused as to where to place the following code snippet in my code. I put the function above my load event and the same exception still occurs:
An unhandled exception of type 'System.Data.OleDb.OleDbException' occurred in system.data.dll
[code].....
I am new convert from VB6 and needs some help developing a stand alone application in VB 2008 that needs access to stored data values.All applications I have developed so far have been for computers that have either SQL Express or Access installed locally on the computer. This has made development really easy since I could use ADO to access and query the data.
The application I am now developing will be installed on a computer that does not have any of the MS office applications and I do not want to install SQL Express on the computer. But I still would like to use an 'ADO type' functionality to access, query and modify the data stored in the system.I started looking into using XML, but I was unable to find much information on querying and modifying individual elements.
the access data are not getting reflected on the DataGridView unless the form is reloaded again. I am acessing the MSAcess data for back end processing (SELECT,DELETE)using odbc connection and displayin on .NET form using DataGridVew
View 2 RepliesI have a problem with transfering data from MSSQL Server 2005 to Access.
I need to make a VBScript that can take out all data from one table in mssql and update one table in Access. The tables exist in both databases and looks the same, but there can be more data in the table from MSSQL Server so i need to update the table in Access with this data.
E.g. I have a table called: SMP_Alert in both database's. So i want to do something like this (dunno if that is possiable):
Set objConMSSQL = CreateObject("ADODB.Connection")
conMSSQL = "Provider=SQLNCLI;Server=127.0.0.1SMP;Database=SMP;Uid=SA; Pwd=smp;"
objConMSSQL.Open(conMSSQL)
[Code].....
Or do i need to create a recordset of the table (SMP_Alert) from MSSQL, and loop through it to transfer the data into the table in the Access database?
I am quite green to VB .NET and it start occuring to me that I am doing things probably in a very ineffective way.Anyway here is the problem I have datasets, consisting of integers there is set 1 which is of format ID, ID2 - ID here is unique but different ID can refer to same ID2. Before I start reading in the data I have unknown number of these entries (ID and ID2 can be at least as high as 99999999)
Then I have a second data set of format ID2 here is the same as in the set 1 and it can contain several PID entries (all integers). In this set the ID2 is unique and again for one ID2 there can be unknown amount of these PIDs, same PID can occur more than once.
[Code]...
Source: DataTable
Destination: Access Database Table
I should mention that the DataTable contains data resulted by an SQL SELECT query and it's not related to the "targeted" Access Database Table.
I'm presently creating an application which uses Access2007 as the database. No problem there. But Since most use Excel for data-entry, i've created two tables in access linked to excel source file. Any change in excel will reflect in Access database and subsequently in my Application . Until now my application only reads the database and displays records in DataGridView. These records, i then export to excel along with other formatting for direct printing as a report as I have no idea how to make report. Now i want to add data-entry capability to my app using password-protection user-access. So i can directly add new record to source file. Also need to know if There's any way of eliminating Access from the picture entirely....
View 1 RepliesI have a query in Access called q1. I want to modify q1 from my vb.net code. How can I do so?
View 2 RepliesI want to build a console app, that when ran, takes a report from one Access 2000 database and copies it over to another Access 2000 database and overwrites the existing report in the destination database. I cannot figure out how to do this in code. I have imported the Access 9.0 Object library, but still struggling.
View 2 RepliesWhere and how do I look for to access the default templates of say for e.g a checkbox, so that I can modify few styles in it.
View 1 RepliesI want to programmatically change ACL for all the subdirectories into a containing one. Specially when ACL of a particolar user is found I want to duplicate that ACL, change the security identifier and add the rule.
Look at this code:
cDirectoryInfo = New DirectoryInfo(strPath)
cDirectorySecurity = cDirectoryInfo.GetAccessControl()
cAuthorizationRuleCollection = cDirectorySecurity.GetAccessRules(True, True,
[Code]....
I want to do the following in Vb.NET 2005 windows form
1. saving Ms-office documents in Access 97 using VB.NET
2. Opening the saved document in Access 97 using VB.NET and show to user after user clicking a link correspoding to the record
3. After user modified the document/xls file, it should once again save into Access 97 database.[URL]..This document explains how to open and save a document from BLOG fields.But without physically saving the document into local hard disk, is it possible to open in OLE control? and after modifing saving back to Access 97 database.
I have a the following setup
m_handsets = From p In RL.App.TComEntities.tblTelephoneNumbers _
Where p.companyId = m_CompanyID _
Select p
m_handsets = DirectCast(m_handsets, ObjectQuery(Of RL.TelephoneNumbers)).Include("tblCalls")
where m_handsets is defined as Private m_handsets As IQueryable(Of RL.tblTelephoneNumbers)
which works as expected however what I want to do know is query the Navigation property (tblCalls) so I can do something like the following From p In m_handsets.tblCalls Where m_handsets.tblCalls.price > 100
I think the complexity comes here because in this instance I could have 5 tblTelephoneNumbers in m_handsets and then x amount of calls for that particular telephone number. I am interested in the tblCalls for each but I would like to filter them all for each tblTelehoneNumber.
Entity Diagram which (hopefully) should illustrate further So I currently know all the handsets that are associated with the company I am interested in. I can also see the calls loaded as a navigation property in debug mode, but I want to say is take this filter (in this example price>100 and apply it to all handsets->calls
I am trying not to become intimidated or give up.I created a simple database and added stored procedures to read the data on a Windows form using Visual Basic in VS 2010.First I tried the Data Grid Example and all worked, I was able to view the data using a connection string to call the Stored procedure.I have stepped it up a notch by trying to bind data to form controls and I am getting this error message when I try to navigate through the data.
System.NullReferenceException was unhandled
[code].....
I want to change the file from resources. When radiobutton"Put new namirnica" checked=true, by clicking on button "save", i want to open .txt file in resources file that is loaded into listview1 and fill with data from textbox1,textbox2,textbox3,textbox4,textbox5,textbox6.
else When radiobutton"modify existing Namirnica" checked=true,I wish that selected index from listview1, replace with data from textbox1,textbox2,textbox3,textbox4,textbox5,textbox6. by clicking on button "save"
Private Sub Form1_Load(sender As System.Object, e As System.EventArgs) Handles MyBase.Load
Dim a As String = My.Resources.Hrana
[Code].....
i have text file more than 2000 row like these:
[Code]...
and i want to find the avarge of the 1440 row ,start from down to up and find the max,then find the avarge for each 30 row and put them besid the data and find the max of these avarge like this max(od data)=---- max(averge)=-----
What I am trying to do may be better for use with SQL Server but I have seen many applications in the past that simply work on text files and I am wanting to try to imitate the same behaviour that those applications follow. I have a list of URL's in a text file. This is simple enough to open and read line by line, but how can I store additional data from the file and query the data?
E.g.
Text File:
link1 - 0
link2 - 0
link3 - 1
link4 - 0
link5 - 1
Then I will read the data with:
Private Sub ButtonX2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles ButtonX2.Click
OpenFileDialog1.Filter = "*txt Text Files|*.txt"
If OpenFileDialog1.ShowDialog() = DialogResult.OK Then
Dim AllText As String = My.Computer.FileSystem.ReadAllText(OpenFileDialog1.FileName)
Dim Lines() = Split(AllText, vbCrLf)
[Code] .....
Am I going completely the wrong way about storing the data after importing from a text file?
I have a DataGridView with one column, I set for that column
DefaultcelStyle->Wrapmode=True
Modify data a with a long string, I call also
vb.net
DataGridView1.AutoResizeRows()
DataGridView1.Refresh()
But the DataGridView doesn't refresh wrap,il looks like this : I change manually current selected row moving to another record and now the refresh is done :
I've been into programming, I've landed a job with a local company, the entire project the gentleman is paying me to do is incredibly easy, with one hitch, the original project I'm converting is built using access databases, for efficiency, and easier online transfer, I'm wanting to switch to using an SQL database, I've got plenty of experience inserting, modifying, and controlling an access database, but where should I start to learn how to essentially set up, create tables, and modify data within an SQL database?
View 5 RepliesI'm working with Crystal Reports in VB.NET in Visual Studio 2005.I have a List(Of Stuff) that I've sorted according to one of the object's members.I've verified in the debugger that the list is sorted correctly.When I define my list as the data source, as in
rptDetails.Subreports.Item("rptSubReport").SetDataSource(theListOfStuff)
and view the report, the list is reversed.So, looking for a workaround, I said, "OK, I'll sort the list backwards before binding it."The list still appeared backwards in the report.So something's happening, and I think it's within the report definition, because I don't know where else the sort order could be changed
I have a vb.net form to add, modify or delete the product list..i have a datagridview in which i m loading data from sql server datatable...now i have a text box which accepts code for the product..i want that when i press a key, all data starting with that key should be highlighted in datagridview.....
eg
i have product codes
A001
A002
A003
C001
D001,, etc..
Now i press A in text box...in datagridview all data with A should be highlighted
I thought I postet this yesterday but I can't find my thread so if this is a duplicate please point me at the original one. Background: I need to create a user account and Modify it's registry before the user logs on the first time. Creating the account is done by using the Winnt provider (works great). To create the profile I'm trying to use Process.start to launch a process as the newly created user. With the use of loaduserprofile property the users profile gets created and i can do my regwrites without problem.
[Code]...
I would like to know the best, or standard, way to accomplish real-time client updates in a small multi-user application using an access data table as a data source.Specifically, this application will be used by 3-4 people. It uses a datatable which is filled on form load and bound to a datagrid at design time. The datatable is stored on a shared drive. The data table on the shared drive is updated in two ways:
1) Users can update the datagrid which then updates the datatable on the shared drive via the data adapter's Update method.
2) A server application does some work on some text files, periodically updating the data table.
I need the clients to reflect the changes to the data table on the shared drive as closely to real-time as possible. I know that the data table stored in memory on the client is disconnected from the data table on the shared drive, so I must query again to get the updates.
1) Is there an alternvative model I can use which is connected, and which will automatically reflect the updates in the data table on the shared drive?
2) If not, what is the best way to check for changes in the data table (so I can know when to call the data adapter fill method)? I am planning to poll the drive for a change to the .mdb file, raise an event and then fill the data adapter when the event is triggered. I am using this method successfully now to check for changes to a text file in another application, and I know how to implement it?
I recently switched to V.Studio 2008 and using VB. I can not find in the data toolbox the connection and data adapters. Should I do something else to make this appear so I can drag them in my form.
View 2 Replies