DataGridViewImageColumn - Disposing Of All Rows?
May 8, 2009
I have a gridview where ALL cells have a value that is an image from the filesystem, but I need to access these files for a certain function and so I've been trying to create a method that disposes of all these images thereby freeing them up on the filesystem (was received permission denied errors). The following loop worked for the first row of images but I can't work out how to do it for all rows:
or Each c As DataGridViewImageColumn In dGV.Columns
c.Image.Dispose()
Next
[code].....
View 1 Replies
ADVERTISEMENT
Feb 25, 2009
Environment: Visual Basic 2005, Windows XPI have the below data grid, I am using. I am trying to show tooltips, when I hover over the "Status" column. Red => MissingGreen => AvailableThe "Status" column is of type: DataGridViewImageColumn. The Images are inserted from "My.resources" I have tried to accomplish it using the below code, but it is not working and believe there might be a better way.
[Code]...
View 3 Replies
Dec 1, 2009
I would like to make my 'Image File Path' column in my datatable set to a 'DataGridViewImageColumn'. I would then like each of the rows in this column to display a image. The image value would be populated from the 'image file path' contained in that cell of the datatable. At the moment i cannot get this to work no matter how many times i try it. At best it just shows the same image in every row and in the wrong column. As the table is populated 'dynamically' when a search is performed this is proving very hard. Below is an image showing the table and what results i am currently getting:
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
dt.Clear()
[Code]....
View 17 Replies
Apr 12, 2011
Is it possible to set IF case using the images present in the datagridviewimagecolumn?
Example:
If current row image = "Red.png"... show error msg
If current row image = "Green.png"... Insert to database
View 1 Replies
Sep 4, 2011
I have a DataGridViewImageColumn with an image in it I would like to make the only area to perform a function of mine when I click it. I can click the row and get it to work but can't seem to only make just the imagecloumn the clickable region.
So as an example I have
Private Sub dgrdStatus_CellClick(ByVal sender As Object, ByVal e As System.Windows.Forms.DataGridViewCellEventArgs) Handles dgrdStatus.CellClick
MessageBox.Show("You chose " & dgrdStatus.Rows(e.RowIndex).Cells("columnCustomerName").Value)
Works for the whole row, my issue is I only want to be able to click the imagecolumn to do this. Guessing I am missing the right item similar to dgrdStatus_CellClick but can't quite pinpoint the fix.
View 5 Replies
Nov 26, 2009
i am new to VB.NET and am creating an application for twitter, my problem is that i have a datagrid on my form. On my code i have created a dataTable to store the user messages in one column and the usernames in the other column. My problem is that i cannot add a third column to the dataTable to store the user images, how do i do this? my sample code is as below :
[Code]...
View 5 Replies
Jan 13, 2010
I have three forms (form1-3). my startup form is form3. This form calls form1.show. then form1 does form1.visible=false and also calls form2.showat the end form1 shows again.
View 4 Replies
Jun 11, 2010
I have created the following code block for use in my app (With the help of You, my online friends), it works ok.
The problem I now have is that I need to Despose of the Array from time to time an then later recreate it.
The "Despose" comand dont seem to work, How should I go about this?
Dim HoofGeregte As DataTable
HoofGeregte = HoofGeregteTableAdapter.GetData
Dim IngredientLabelLocationX As Integer = 42
[Code].....
View 1 Replies
Nov 9, 2009
I have a general query that I need clarifying by some intelligent boffins such as yourselves. I have the following code in a function:[code]Obviously the Dispose method will never be called on the site object or the helper object. This may be a stupid question but can I get an explanation as to how these objects actually get disposed of in memory? Is it just by the fact that the enclosing method they were created in has been disposed of?![code]
View 3 Replies
Apr 14, 2010
How can I dynamically initiate a "new" class?Basically I'm storing references to classes in an array and I want to create and dispose them on demand.
View 4 Replies
Mar 4, 2012
Previous in my app, I've created dynamic controls and and named them blah0, blah1, blah2 etc. There will be a different amount created each time the user runs the app.I'm now trying to delete all of the controls but doing something very wrong. I've got the following
dim checkboxes = Controls.OfType(Of CheckBox).AsQueryable()
dim sPrefix as string = "blah"
for each checknum as checkbox in checkboxes
[code]....
When I execute the above, it only gets rid of every second control and I have no idea why. If I swap the dispose with a msgbox, the msgbox appears every time as I'd expect. It would seem that disposing of a checkbox seems to somehow requery the number available?
View 13 Replies
Jan 27, 2009
why upon exiting a form which has the following code i get an "Incorect syntax near the keyword 'FROM' " ? The form is supposed to be disposed , so why does any code gets 'executed' ?
Private Sub Fill_Data()
Init_Comboboxes()
For Each Lesson_Name As String In SQLArrayFunction("SELECT LName FROM LessonNames", "LName")
ComboBox1.Items.Add(Lesson_Name)
[code]....
View 1 Replies
Sep 30, 2009
i am developing an app in VS 2008 ->
i have frmMain as startup Form and frmsplash as splash screen now wat is happeneing is just my splash screen will not go off it remains there untill i click away from splash form somwhere on frmMain: One thing i have noticed and would like to share is: When i run my app. thru VS it works fine however when i run my myApp.exe splashScreen will not go off?
View 4 Replies
May 17, 2011
I have a class where there is some private strings to hold some data like name, address, etc. And also a private object of Process class. It also has an "AddHandler" method.
So, how to take care of the disposing part.
More info: I'm wrapping up this code into class.
View 21 Replies
Sep 26, 2011
I misidentified the problem. It is actually like this:[code...]
Code analysis complains about this because ms can be disposed twice. That will only be true if zStrm, which takes the memory stream as an argument to its constructor, disposes of the memory stream when it cleans up. That seems like a totally nutty thing for the disposer to be doing. Does it really do that? Would a class that takes another class as an argument, be so uncivil as to dispose of that argument?
I suppose it would, since the alternative would be that the memory stream might not be disposed at all if it was created in the constructor like this:[code...]
I guess the only real question is whether or not I have to worry about this?
View 14 Replies
Apr 14, 2010
I've been working on a few large custom controls, and I noticed that when I use them, my memory starts ballooning. If I add a control at runtime, it increases the memory, but when I remove the control, it decreases less than it increased. However, it would stop balooning at some higher value. So if go back in forth between pages (which adds and removes the control), the memory would look something like this:
1,000K|5,000K|4,000K|9,000K|8,000K... 20,000K|25,000K|21,000K|25,000K|21,000K|25,000K... etc I know it takes a while for the GC to run, but the memory would stay consistantly high for long periods of time.
I tried writing a Closing routine, where when I called it, the control looped trhough its children and disposed all the internal controls, which seemed to help a little, but the memory after running the control and disposing was still much higher than before running the control. I also use custom event addhandlers. Should I remove all these as well. It would be nice if I received a little guidance on this.
View 2 Replies
Aug 13, 2010
I have declared Fonts at class level to use it through my methods in that form. Form 'frmA' is shown with ShowDialog and when it closes or stops using fonts I'd like to properly dispose fonts.When I run code analysis FxCop it complaints with:CA2213 : Microsoft.Usage : 'frmA' contains field 'frmA.Font1' that is of IDisposable type: 'Font'. Change the Dispose method on 'frmA' to call Dispose or Close on this field...How to properly dispose globally declared fonts so that is "by the rules" and FxCop does not complain any more?How to 'Change the Dispose method on 'frmA' to call Dispose'?
VB.Net
Option Strict On
Public Class frmA
[code]....
View 7 Replies
Nov 30, 2010
I am dynamically creating 12 picture boxes then click next and dynamically create the next 12 (in place of the first 12)
From what I can tell it is creating the next 12 I just can't see them. Do I first have to dispose of the original 12 first? if so how do I go about disposing of them?
Private Sub Pictures(ByVal DataXml As IEnumerable(Of XElement))
Dim song = DataXml
MsgBox("song index " & SongIndex)
[Code].....
View 4 Replies
Aug 6, 2009
There to all gurus,I'm trying to build an Excel generation aplication using VS 2008 and Microsoft Excel 2003, but some how the Excel process that i create it's stuck in the computers memory, and it's only removed when I END the VB Application.
[Code]...
View 10 Replies
Jan 20, 2009
Class Structures
Public Class SBO_Collection
Private p_sample As SBO_Sample
[Code].....
View 1 Replies
May 24, 2010
I have a button which opens FormTest. When FormTest opens, it creates an instance of ClassTest and that class instance takes the form instance that called it (FormTest) so that it can perform operations on FormTest from the ClassTest class instance. So i have a form which owns an instance of a class which has a reference to the form.
[Code]...
View 1 Replies
Jun 4, 2010
I'm building an application in VS2008 (VB) and SQL 2005. I'm using databindings to bind controls to LINQtoSQL objects. If I bind a 'third level' property that can be null I get "Value cannot be null. Parameter name: component" error while disposing the control.
Steps to reproduce (8):
1- create TEST database in SQL
2- create tables like this:
USE [TEST]
GO
/****** Object: Table [dbo].[Table03] Script Date: 06/04/2010 12:26:44 ******/
SET ANSI_NULLS ON
[Code].....
View 10 Replies
May 27, 2010
Quote:
Dim MyForm As Form
MyForm = New Form1()
With MyForm
[Code].....
i use these code to dispose a MDI Child form, but it automatically close the form.. What should I do?
View 2 Replies
Feb 4, 2010
I am using Direct2D and the speed is so much better than gdi.however when i call the Dispose method of a D2DBitmap object no memory is freed up even after a garbage collection
so i guess my question is how can i properly dispose of a D2DBitmap object?
View 3 Replies
Jul 19, 2010
I'm making an MDI child window switcher (to set focus on selected child) sort of in a windows-style taskbar at the bottom of the program. I've got things set up so that when a child window is opened, a toolstripbutton is created and added onto the toolstrip and contains the window number and window type (what the window does). All that runs very well, but when I want to close a child form, I need to dispose the button that corresponded to it. I tried something like this:
For Each C As Control In frmClient.Controls
If TypeOf C Is ToolStrip Then
For Each tButton As ToolStripButton In C.Controls
[Code]....
But nothing happens at all. Is there a practical method to do this or am I missing something?
View 6 Replies
Dec 13, 2011
Brief : I have code which works if I don't dispose of the BindingSource after it has been assigned to DataGridView.DataSource but breaks if I do dispose it - why? Do I need to worry about disposing this?
[Code]...
So, what is going on here? When I set DataGridView1.DataSource = Bds does it just do this as a reference? How does Bds get disposed once the procedure exits? Does garbage collection pick it up if I assign something else to DataGridView1.DataSource? Do I need to worry about this?
View 2 Replies
Sep 17, 2009
I remove the datagridviewcomboboxcolumn from the datagridview and dispose it. When I go to dispose of the datatable that is the datasource to the comboboxcolumn an ArgumentOutOfRangeException is thrown from the datagridview. Apparently the datagridview is still handling events for datagridviewcomboboxcells for comoboboxcolumns that have been removed from the datagridview.
View 8 Replies
Jun 24, 2011
I've tried so many ways to get rid of picture boxes for my space invaders game, yet it's not working. The bullet hits the alien, the alien goes invisible (which it should) but it doesn't go to a new location or get disposed. And the bullet then intersects with it again but because it's invisible the user just see the bullet reset out of no where and the score gets added which it shouldn't.
Code:
If Bullet1.Bounds.IntersectsWith(AlienArray(0).Bounds) Or Bullet2.Bounds.IntersectsWith(AlienArray(0).Bounds) Or Bullet3.Bounds.IntersectsWith(AlienArray(0).Bounds) Or Bullet4.Bounds.IntersectsWith(AlienArray(0).Bounds) And AlienHitArray(0) = False Then
[code]....
So, basically my question is how do I remove aliens (pictureboxes) off the board or disabled the picture box in space invaders when they are hit. (my bullet collision works fine).
View 8 Replies
Oct 1, 2010
Our application uses a custom DataAccessLayer class almost exclusively, and within that we do use Data Access Application Block (currently version 2). We are getting the infamous "GetOrdinal" error sporadically. We are not using out-of-method connections. We are using DAAB version 2. Below is a typical example of our DAL methods:
Public Function MyDALMethod(ByVal Param1 As Integer, ByVal Param2 As Integer) As System.Data.IDataReader
Dim db As Database = DatabaseFactory.CreateDatabase()
[Code].....
My main question is should these DAL references be disposed somehow? It's a custom class written in VB.NET, so it doesn't implement IDisposable so I'm not sure if there's anything to be done or not, but we do have errors and issues (like the GetOrdinal problem) which seem to be load-related, and I'm wondering if this is part of the problem.
View 1 Replies
May 9, 2012
I'm trying to work out whether every Class in an Inheritance chain needs an explicit Dispose(disposing As Boolean) method or, if a given Class has neither managed nor unmanaged resources to dispose of, it can be skipped for that Class - even if a latterClass does require a Dispose method to dispose of mananaged or unmnaged resources?
Here's two examples:
Public Class BaseClass
Inherits Component 'Component has already implemented IDisposable
[code]....
View 15 Replies
