Basically,I would like to bind the data into datagridview which called PODetailsGrid during page_load. After the data had been bind into the gridview,I would like to make alternate color in each row. For example, the font color for row1 is Black,then second row should be Red,then third row will be Black again..
Code:
Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
GeneratePODetailsView(GenerateDataSource())
End Sub
Basically,I would like to bind the data into datagridview which called PODetailsGrid during page_load. After the data had been bind into the gridview,I would like to make alternate color in each row. For example, the font color for row1 is Black,then second row should be Red,then third row will be Black again and so on..
Code: Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load GeneratePODetailsView(GenerateDataSource()) End Sub
I want to have my current row stand out as the current row by virtue of the background color.I also want my current cell stand out from the row color.
in other words i want to controll the background of the current cell as well as the current row, and have these colors different from each other as wel as the background from the non current cells.
I am getting confused with the notion of the current row vs the selected row.I have tried messing with the default row style.selectedbackgroungcolor as well as the same for the default cell style, but cant get it to work the way i want.
i can almost get it if i set the selection mode to full row, but then cannot get the current cell to have a different background color.
i have to do a system that will trigger an alert. i need to change the color of the box in datagrid view to certain color, according to it's condition.
as example, the first alert will be trigger if there is any values that are below 5. so all box in the datagridview that contains value less than 5 will change to red color.
I build an agenda in access on the left you have column year and then the month an then you have columns from monday to satrday
what i would like to see is when i select a year in the combox all the rows in datagrid of the selected year to have the same color also i would like to do that with the selected month
I'm working on a program that does a bit of color-coding in a datagridview. My problem is that when a row is selected, the color-coding goes away since the normal behavior for the datagridview is to change the back-color to blue and fore-color to white. What I want it to do though is keep the fore-color that is being set through my code. I guess what I'm trying to find out is if there is an event that happens when a row is selected that I can modify to run my own color-coding. I posted a link below to an image of my program that what I'm talking about. My color-coding code is below that (if anyone would want to know what that looks like). gets solved I'll be sure to post the code solution!
http://img204.imageshack.us/img204/8791/astleymainview.jpg For i As Integer = 0 To Me.dgvOne.Rows.Count - 1 If Me.dgvOne.Rows(i).Cells("SCHFINISH").Value < CDate(Now) Then
im working in visual basic .net,i have a datagridview like this:[URL]...I want that when the user selects a whole row, only the values of the cells that have colors will be saved to textboxes, something like Textbox1.Text = cellwithcolor1, and so on with other cells that have color. Like, if we see the image, in row 3, 'AS' will be saved in textbox1, and 'CR' in textbox2.
I have a DGV which shows data of my transaction_table. There r 4 columns ID, NAME, DUE_DATE and STATUS. Let ID is 1, NAME is alizee, DUE_DATE is 25.02.2009 and status is notpaid(by deafault). Now , I want to set row color according to following condition...if
DUE_DATE >= current date(today's) and status="notpaid"then set row color= greenif elseDUE_DATE < current date(today's) and status="paid"then set row color= greenelseset row color = redBcoz
My application uses 3 DataGridViews in asingle Windows form. The 3 are never visible at the same time, and I have a sityation that I cannot figure out. The first examole below works perfectly:
For Each row As DataGridViewRow In dgvBooks.Rows If row.Cells(4).Value.ToString = "YES" Then row.DefaultCellStyle.ForeColor = Color.Red
[code]....
The only difference in the 2 blocks of code is the name of the DataGridView. I'm at a complete loss to figure out why one works completely and the other only partially. I have checked the execution, one step at a time and everthing happened at the right time and accurately, The upper case string is correct as is rhe index designation of the field, and I'm lost for a reason.
What appears to be a simple logic implementation is embarassing me each time I try to get it done. I have a very simple task: loop over rows in a DataTable and each time the next row is reached, set a variable alternating between 0 and 1.
Dim the alternatingValue as Integer For Each dr As Data.DataRow In DT alternatingValue = 0 Next
...so, when this loop finishes with this row, I need to set the alternatingValue = 1 Then when the next loop finishes, I need to set the alternatingValue = 0?
i have a datagridview which has a datasource of a SQL database. In this database i have a column which has a boolean value, and in my form, it is used to specify whether a checkbox is ticked or not. What i need my program to do is color the cells of the datagridview based on if the checkbox is ticked or not for the particular rows which have it ticked in the database. Here is what i have, but it doesnt work:
Code:
Dim count As Integer = 0 While DataGridView1.CurrentCell.RowIndex <= DataGridView1.RowCount If CellIDCheckBox1.Checked Then
[code]....
what im trying to do here is loop through the datagridview and see if the checkbox is ticked or not and coloring it based on that.i have also been messing around with some LINQ code, but that doesnt seem to work either..
I have a bunch of columns in a datagrid view (date, transaction type, amount).If the amount in a row is '150.00', I want to make that cell red.I made a Private Sub and run this after the datagridview is filled.
Private Sub ColorCells() Dim ColumnCount As Integer ColumnCount = dgvLedger.ColumnCount - 1[code].....
However it seems to have two bugs. When it is first run the first time when the form is loaded, it doesn't put the rows with 150.00 in it in red.If I have a button on the form and set it to run this Private Sub, then it runs through it again and will color the ones in 150 as red.If I resort the datagridview by clicking on a column, they all return to green again, and it looses the formatting.
I'm filling a DtatagridView as usual, using a datatable as datasource and I have the SelectionMode = FullRowSelect, but since I need to color each row according to its result, I have set the property DefaultCellStyle - SelectionBackColor = Transparent, well, I'm not going to complaint about the font looks a little bit distorted, but about the selectedrow does not render correctly, If I minimize the program and then maximize it, the selectedrow appears with the image of the desktop's background.
basically, when a user selects a row... the colors should inverse. for instance, if the background color is red and the foregrould is black when the user selects the row, the foreground becomes red and the background black... and then goes back to its orginal color when the user leaves the row.
How would I sort or filter the datagridview so that only cells that are color.red are viewable? What I have now shows all of the red and not red cells with the values <=0 else color.black. But if I were to put this on a button I would want only to see the color.red cells on the gridview.
Try '############################## For Each dgr As DataGridViewRow In dgProducts.Rows '############################## If CInt(dgr.Cells(4).Value) <= 0 Then dgr.DefaultCellStyle.ForeColor = Color.Red Else dgr.DefaultCellStyle.ForeColor = Color.Black End If Next
I have a subroutine for changing the datagridview's columns' colors on form load.Now, everytime the user change a cell's value, the cell's backcolor is changed.If the user click 'save' the program will call the subroutine for changing color.I got everything working except the part that it will return to the color on load after save. I think I should refresh my datagridview but I don't know how to do this.
I'm working with a DataGridView that I want to format based on the condition of whether or not a date has passed. For example: If the date in a cell is past the current date, that cell and its row are formatted with the forecolor red. My current code is below, and while it doesn't present me with any errors, it just plain doesn't do anything.
Private Sub dataGridView1_CellFormatting(ByVal sender As Object, ByVal e As DataGridViewCellFormattingEventArgs) Handles DataGridView1.CellFormatting If Me.DataGridView1.Columns(e.ColumnIndex).Name = "Due Date" Then
i have a datagridview which has a datasource of a SQL database. In this database i have a column which has a boolean value, and in my form, it is used to specify whether a checkbox is ticked or not.
What i need my program to do is color the cells of the datagridview based on if the checkbox is ticked or not for the particular rows which have it ticked in the database. Here is what i have, but it doesnt work:
Code:
Dim count As Integer = 0 While DataGridView1.CurrentCell.RowIndex <= DataGridView1.RowCount If CellIDCheckBox1.Checked Then
I want to set Color to specific cell in DataGridView as in this code , but didn't accept BackColor property. Form1.DataGridView1.CurrentRow.Cells(3)......BackColor
one of my forms wont load! it is not underlined in blue or whatever but it keeps giving me a runtime error and i dont know why bc it was working before
Code: Private Sub AddEmployeeToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles AddEmployeeToolStripMenuItem.Click NewEmployee.Visible = True 'throwing the error Me.Enabled = False End Sub
thats how i have been opening my other forms too but just this one gives me this error "An error occurred creating the form. See Exception.InnerException for details. The error is: Object reference not set to an instance of an object."
we develop a dll in vb.net and we call that dll in our application .eacgh and every time we register the dll using regasm method.is there is any code for register the dll
I know how to have alternate row colors with ListView. But how about with ListBox? I've run a search. I read in some web sites where they say you can't. Is that true? Meanwhile, I've done something like: For i As Integer = 0 To ListBox1.Items.Count - 1 Step 1 If i Mod 2 = 0 Then ListBox1. BackColor = Color.FromArgb(150, 250, 255) Else ListBox1. BackColor = Color.White End If Next i with ListBox's DrawItem event. And it doesn't work.
