i have a form with the DateTimePicker control on it. When I select a date it gives a value like "date time" (Eg.: 5/12/2010 12:20:35 PM). But here the time returned is current time. What I need is for the date chosen from the picker automatically set the time to 00:00:00 instead of the time when the date was picked.
View 1 RepliesI have a form with the DateTimePicker control on it. When I select a date it gives a value like "date time" (Eg.: 5/12/2010 12:20:35 PM). But here the time returned is current time. What I need is for the date chosen from the picker automatically set the time to 00:00:00 instead of the time when the date was picked.
View 3 RepliesCan anyone help me with the control to enter time as in the system's format .
View 3 RepliesSo I currently have the following:
2 timers
2 labels
1st label is "Clock" this pulls the time from the users current time zone/local time
2nd label is "UTCClock" Which would be UTC time
Now I have this for the first label: clock.Text = Format(TimeOfDay, "hh:mm:ss tt")
Which would give the users current time zone/local time. As for the UTC.. how would I add in for the UTC time from where the user is located at? I did some searches.. but couldnt find what I was looking for.. IM pretty sure its not as easy as getting the users current time zone/local time.. So im assuming that Theres a "bit more" code into getting UTC time..
I am using this line of code on form load event it is working very fine but i have to problems
1. It replaces the form name and display the date and time but i want to keep both date and time and forms caption separated by some space.
2. When form loads it load the current date and time but the time does not change it should run.
What should i do please please help me code is as follows
Me.Text = Date.Now.ToLongDateString & " - " & TimeOfDay
How to get the current date and time in textbox in IST ( Indian Standard Time) in vb.net ?
View 1 RepliesI'm writing a report scheduler that is somewhat of a clone to the backupexec scheduler and the layout can be seen in post #10 here: [URL]..It works great and saves/edits/deletes records just fine, but now i need to compare those records one at a time in a windows service that i'm writing in order to trigger automated report creation and emailing - i already have the report and i already have the code for the emailing, i'm just looking for the most efficient way to loop through the table (that i've pulled in to a dataset) and compare its records with the current date and time - if true, the event fires.
[Code]...
1stSun, 2ndSun etc are bit fields, time is a datetime, and the remainder are varchar. My service checks the database every thirty seconds.The english version of what i'm trying to do is "Connect to the database, grab the entire table (it will always only have 5-6 entries max, so i felt 30 second sweeps was okay), and If today is the 1st Sunday of the month, and it is currently 11:00:00 a.m. (could be any day or time, this is just an example) - loop through the dataset to identify if any records match the time field or greater - if they do, fire the report
I need to compare the current time with different time intervals, how can i get the time in this format so i can compare them.Format: 09:45:00
View 3 RepliesJust getting started in VB.NET. I would like to add X-number of text boxes at run time. And then be able to address them by their index or some sequential numerical value (like an array)
This is what I have so far:
CODE:
When I turn this into a loop to create multiple toolboxes, how do I assign a name to the controls, or will all of them be named "MyTextBox" ? I'll increment their position so thats no problem.
im using the timer control, how do i set the start time and finish time? for eg, show a label text for 4 secs then hide. Googled for examples but still no joy.
View 4 RepliesI have a Date Time Picker control and need to get it to display as H:mm in a text box as a declaration so that I can transfer to a database, I do not want the seconds. I have tried using :ToString("H:mm") but it just zero's off the seconds ie..."13:45:00".
View 3 RepliesI'm having a little problem trying to figure out how to get only the time from a datetimepicker.I've set up a datetimepicker to only allow user selection of time by setting Format to Time and ShowUpDown to True.However, when I store the value of the datetimepicker to a variable, it returns a date as well.[code]However, this seems like a really inelegant solution and I can't figure out how to get an AM/PM behind that.I feel like I'm missing some really simple solution that I'm just not seeing! There HAS to be a way to get just the time!
View 3 RepliesI have a DateTimePicker control that returns the current date.My usage is like this: DateTimeInput.Value.ToString("MMMM dd, yyyy")Please note that I need to get the date in the specified format.I just don't know how to add 1~2 years to the date.I mean if user selected January 01, 2009, I want to get January 01, 2010.So how can I add just 1 year or 2 years to the year of returned value?
View 3 RepliesI'm new to VB and I'm so confused when using DateTimePicker. To be more specific, I have 2 inputs and two of them are Booking Start Time (BST) & Booking End Time (BET) (using DateTimePicker and set them as Time ). I should allow users to choose any time (including Minutes and Seconds)for BST (just need before than now) and BET. BET must be greater than BST at least ONE minute, but still also ensure it less than now (else it should appear a message box to tell specific problem). Then,system will calculate how long it is. [code]....
View 2 RepliesI have 2 datetimepickers on my form, and I use them to pass parameters to my sql queries for reporting purposes. You would use them to pick a date range and display clock in times for employees. Anyway, I need an option so users can see information from a single day(24 hour timespan) My first Idea was to let the user change the date on the first datetimepicker then changing the time to 12:00 AM then the second datetimepicker to 11:59 PM. I want to be able to do this programmatically, but I couldnt figure out how to change the time.
View 1 Repliesim trying to compare time value of to two datetimepickers, i tried to use dt_Start.Value.TimeOfDay > dt_End.Value.TimeOfDay but it doesn't work. btw, i trying to make a scheduler. here are some of my codes:
Dim strUpdate As String
If dt_Start.Value.Date > dt_End.Value.Date Then
MsgBox("End date is earlier than Start Date. Please check.", vbExclamation, "Error!")
ElseIf dt_Start.Value.Date < Today.Date Then
[Code]...
I sure this has been asked more then once... New to vb.net and I have been experimenting with a datetimepicker and how it looks at and deals with time. What I am trying to do is to add up my time (not worried about the date at all). I have it figured out and can get it to work so long as I do not go over 24 hours... and that is where my issue comes into play.
How do I display my total time in hours once it has gotten over 24 hours ( I do not want days.. just hours) for instance, a 40 hour work week, not 1 day and 16 hours.
[Code]...
How do i set only date will be inserted into the database using Datetimepicker??
View 10 RepliesI have a DateTimePicker. Its Custom Format "hh:mm tt". Now if someone changed the value in DateTimePicker e.g 12:33 AM, I need move the date to 12:35 AM.On event LostFocus I'm able to retrieve all the information:
DateTimePicker.Value().Hour
DateTimePicker.Value().Min
and manipulate the values, whether to increase or decrease.Now, how do I assinged back the modified values to DateTimePicker
DateTimePicker.Value() = ??????
Is it possible to disable the dates that appear before todays date in a dateTimePicker control?I want to put in some validation so that my users can only select days in the future...ie a future appointment date?
View 5 RepliesI am wanting to retrieve the current weeks dates from a DateTimePicker control.
Eg, if i select Tuesday July 5, 2011, i will return the following dates: Sun July 3 2011 right through to Sat 9 2011
If DateTimePicker1.Value.Year <= DateTimePicker2.Value.Year Then 'dtp2 = expiry date
If DateTimePicker1.Value.Month <= DateTimePicker2.Value.Month Then
MsgBox("Expiry Date Correct!")
Else
MsgBox("Expiry Date incorrect!")
End If
End If
How would I get it to check the date? Datetimepicker1 is the current date, while Datetimepicker2 is the expiry date.
I have an ASP.NET application with a SQL Server back end. I am storing all my dates in UTC format and doing the appropriate conversions to the local time zone of the browser viewing it. One of the pages asks for a start date and end date (no times).
I am taking the start date and setting the time to 00:00:00 hours (midnight) and I'm taking the End time and adding a time of 23:59:59, so that the date range covers the whole day. Now what I'm trying to do is do a SQL query to do a search for records in this date range. The problem is, the data in SQL is in UTC time and the user is typing their dates and times in their local date and times. My quickest solution was to convert the date and time to UTC, then search the records. However, by doing this, I am to believe ASP.NET converts the given time and date to UTC based on the server time zone. How can I convert a date and time to UTC time based on the time zone of the user?
i wish to concatenate date and time from 2 different datetimepicker after concatenated I want it to be save in sql database format which is yyyy-MM-dd HH:mm:ss
I'm doing half way and my query is like below.
Dim insertCmd As New SqlCommand(Sqlstr, connection)
insertCmd.Parameters.Add("@School_Subject", Data.SqlDbType.NVarChar).Value = txtSchoolSubject.Text
[Code].....
I have a datetimepicker on a form. It is not bound to a table field. When I open the form, I click on the arrow on the right of this control, the calender picker appears, I click on a date, and then I have to hit enter for the picker to close and the date to transfer to the control.After that, I can click on the arrow, click on another date, and the picker closes immediately and the date value goes into the control. Why do I have to hit enter the first time? I would like to be able to transfer the selected date to the screen the first time with just 1 click and without hitting enter.
View 1 RepliesI want to display ONLY the time from the datetimepicker control in a textbox. It needs to stay in time format to be used in a timespan for arithmetic reasons.
View 7 Replieshow can i remove the time when i inserted into the database using datetimepicker??.
View 1 RepliesI have a DateTimePicker to display time (for example) as 05:00:00 AM or something like 07:00:00 PM. When I save my form's data, I'd like to save the time as 05:00:00 or 07:00:00, dropping the AM/PM extensions.
View 7 RepliesOk i have bashed my head against a wall trying to work out how this is done. i have 2 text boxes with the values:
[Code]...
Now if txt2.text = the current time and i want the time when it was txt1.text (15hours,27mins,6seconds) ago how do i do it... for example current time is "01:05:27" and if i subtract "15:27:06" away i should get time as "09:38:31"
I have a datetimepicker but the custom format is set to HH:mm tt so that I can get eg 11:20 AM
this value I have stored in database with the help of Label4.Text = DateTimePicker3.Value.ToShortTimeString.