When I check the Checkbox in datagridview and click Save button I want that the Checkbox in that cell would become disabled to uncheck or check again or invisible at all. Is that possible, what could you advise ?
I guess it should be smth like this (my datagridview shows only checked checkboxes),but it doesn't help, I still can uncheck boxes...
[Code]...
if i have 24 PCs then i read it from the database which i have stored each details for each PC in the MS Access. Then each PC there is a checkbox. If the first user checked the , example PC14's checkbox, The second user which log in can't see the availiability of PC14 and the PC14's checkbox must be disabled. But the problem is, i used hard-coding for only 1 PC. Even if the first user check or uncheck the box, the box is still disabled. Why ? Another thing, how do I disabled any of the PC range from PC1 to PC24 if the first user pick and the second user who log in can see that the PC the first user chose is being disabled ?
Below what i attached is part of my hard-coding in VB.NET 2005 for the availiability and enable:
Do While myreader.Read() = True
PCNO = myreader.Item(0)
Availability = Val(myreader.Item(1))
[Code]....
I am working on an application that has a lot of checkboxes that start off unchecked, and each one has an associated textbox which is disabled until the checkbox is checked.I am going through and currently one by one doing an "if checked, enable, if uncheced, disable" - however it is taking forever!Is there a quicker way / method I should be using that will speed up this process?
View 7 RepliesI have a DataGridViewCheckBoxColumn who's column name is "booReadyToReport want to hide all the checkboxes in this column if "bintAnalyteCodeID" doesn't equal the selected value in a combobox on my form. ut I run this bit of code the DataGridView DataError event fires currently, have nothing in the event except an comment. he code seems to work, but I'm new to VB.NET and I'm wondering if this is the correct way to handle thishould I use the CellPainting event?
highlight rows with RBF3
For Each dr As DataGridViewRow In Me.dgvCalculatedResults.Rows
f dr.Cells("bintAnalyteCodeID").Value = Me.cbxAnalyte.SelectedValue Then
[code].....
how to auto disable asp.net checkbox1 on page_load event ?
View 2 RepliesI am trying to enable/disable a checkbox depending on whether or not a match is found on the checkbox name and a list of controls. When I step through the code and pass the line "ChkBox.Enabled = pbEnable", the Enabled value does not change. In this case the state before the change is False. pbEnable is True.[code]
View 2 RepliesI have some DataGridView code written in vb.net. (Nothing is attached to a datasource.)The 4th column is a checkbox cell.How do I detect if that checkBox is checked or unchecked?This code strangely reports TRUE or FALSE at random times. It even turns ON the checkbox in rows other than the row I clicked in. (Huh?)
Private Sub DataGridView1_CellContentClick(ByVal sender As System.Object, ByVal e As System.Windows.Forms.DataGridViewCellEventArgs) Handles DataGridView1.CellContentClick
Dim whichGrid As DataGridView = CType(sender, DataGridView)
[code].....
I've tried countless other methods... none seem to actually get the checkbox ON/OFF value in vb.net.
I need to be able to let a user decide to disable or enable the speech capabilities in my application using a checkbox or radio button.
View 12 Repliescreating an install button. The button must be able to find a file from a folder and be able to place it in another folder. But the install button must also disable a checkbox when it itself is checked.
View 9 Repliesi want to make checkbox as readonly not enable/disable.
View 1 RepliesHow do you disable additional checkbox selections/deselections without sacrificing the functionality of the ListView? I know you can call: ListView.Enabled = False, but that also disables any scrolling within it.
For example: I have a timer that starts a backup based on the Listview items that are checked. After a certain time, I don't want the end-user to be able to click on any of the checkboxes within the listview (so I have a set number of items to backup), but I do want them to be able to scroll the list while the backup is being performed. I tried this[code]...
How to disable registered user account in asp.net membership using checkbox ?
View 1 RepliesI have a window having 2 dropdowmlists(schemename-SN and propertyno-PN) , one chkbox ,one "VIEW" button.SN has options "all" with value=0 and many other options with respctive values.Now,i want the code should behaves as follows:
1.0n window onload, SN must b visible bt PN nt.
2.if i select SN other thn All...the PN shud b visible and if i select "All" ,PN hides.
3.when check box is checked- PN hides,and if it is unchecked- PN visible..
Important:-This whole ddl n chk box are in updatable panel,button is nt in that.I want a browser compatible code so javascript can't b used directly(cz they give problem in mozzila and chrome).Right now, i have done this JavaScript and its is working fine.
function window.onload()
{
DisableProperty();
}
[code]....
but this code is not browser compatible.here onload,onkeyup and onclick functions are used , but they dont work in other browsers except internet explorer.
I need to change the cell type of an unbound datagridview ROW to checkbox type at runtime. Optionally adding a row of all checkboxes or changing the default type to checkbox is also fine. I see many examples for setting a column type to checkbox but I don't see anything that operates at the row level. Even operating at the cell level would be fine.
View 1 RepliesI have the code below which works fine when checkbox at Cell 2 is Checked ie., the date is inserted in Cell 9. Now, when I unclick Cell 2 I want the Cell 9 to be cleared. Presently, it is not cleared after unchecking. The code highlighted in Red is the area I reckon I have a problem...
Code:
Private Sub DgvReturns_CellClick(ByVal sender As Object, ByVal e As System.Windows.Forms.DataGridViewCellEventArgs) Handles DgvReturns.CellClick
If e.ColumnIndex = 2 Then
[code]....
i want to know how to perform some action when i check the checkedbox in the datagridview ?
if like, when i check this>> i will bring some data to another DGV, on the other way of saying is just add a new row into another DGV.
same goes to when unchecked the checkedbox >> i want to remove the row based on the checkbox in that specific row that i unchecked .
i used the method [datagridview_CellContentClick] and [datagridview_CellEndEdit] before..
for add new row into datagridview-SUCCESS but when i want to remove the specific row, -FAIL to do. that.
I have a tbl called tblProjectpatients which also has 2 fields Yes and No (these have the data type - Bit). These two fields have been populated with false and true values. On my form, I have a datagridview which is populated with various values from tblProjectpatients. The problem am facing is that the checkbox's for Yes and No on the datagridview are empty at runtime eventhough at the backend they have either False or True values. I am expecting the checkbox showing on the datagridview to be either checked or Not Checked depending on the True or false values.
View 1 RepliesI have a datagridview (unbound). Fields are Name, Family Name and Phone No and a checkbox colum.There are ten rows in that DataGridView. There is an OK buttonI need to get message of showing which rows user has checked. The message should appear when user clicks OK button.I am not able to get this message. I tried following code in OK button
Dim strCB As String =
dgvChooseQs.Rows(0).Cells(3).Value.ToString
[code].....
this code which supposedly updates myTable when the check mark is preset on a datagridview.The latter has a checkbox (a bit in myTable) in column 5.The code works but only updates one row no matter how many check are in the column.
View 5 Replies2 of the columns have data added to them separately from 2 textboxes so I want to disable these 2 columns and also have it so that when I tab through the cells the cursor does not enter the disabled columns but goes directly to the next enabled column of the row
View 2 RepliesI have a DGV with a Button Column. I need to be able to disable or freeze a single cell (or cells) in that column so that its button can't be clicked, but I haven't found a way to do it. It this possible?
View 4 RepliesHow do I disable copy from a DataGridView. It's a silly security feature.
View 1 RepliesI have a dialog that gets called from time to time. It is only created once, and then shown or hidden. Depending on the current conditions, when I display it, I need to disable the controls on it so that the user does not make any changes.I have code that checks the condition and sets the enabled property to false for the controls. There is a DataGridView control on the dialog, and for some reason, it stays enabled and allows changes. Does anyone know why, or what I need to do to get it to not accept any input?
View 4 RepliesI have appended a column of checkboxes to a DataGridView using the following:
Dim chk As New DataGridViewCheckBoxColumn
DataGridView1.Columns.Insert(0, chk)
How do I change the checked state of a particular checkbox?
I have tried using the following code:
Dim val2 As DataGridViewCheckBoxCell = DataGridView1.Item(243, i)
val2.Value = True
DataGridView1.Item(243, i) = val2
The last line resulted in runtime error "InvalidOperationException was Unhandled
Cell provided already belong to a grid". Index 243 exists.
I have a checkbox column in the datagridview and also a column named "partqty" which displays the quantity of materails available.. I would want that when the user checks on the checkbox, the quantities of checked rows should be added and displayed in the textbox..
I tired something like this.. But it displays 0(zero) in the textbox.Private Sub button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles button1.Click
[Code]...
I just want to know on how will I add a Checkbox in each row of my datagridview. First I used a datatable to get all the values from my database and then pass it all to the datagridview. What I want to happen is at the first column of my datagridview there is the checkbox.[code]
View 4 RepliesI've created a Datagridview bound to a Datatable. This Datatable is updated by a event to reflect statistical information as it changes (sub second resolution). I have a checkbox to determine if a row is available for other functions and can be toggled on and off normally if my eventhandler is not receiving my updates.
If my bound Datatable is changed, the checkbox returns to its previous state as soon as the cursor or focus leaves the checkbox glyph (not the cell).
How do I toggle the checkboxes without them reseting without disconnecting my eventhandler?
I have a datagridview (unbound). Fields are Name, Family Name and Phone No and a checkbox colum.
There are ten rows in that DataGridView.
There is an OK button
I need to get message of showing which rows user has checked. The message should appear when user clicks OK button. There could be several message, checking each row one by one, in a loop.
I am not able to get this message. I tried following code in OK button
Dim strCB As String = dgvChooseQs.Rows(0).Cells(3).Value.ToString
Cell(3) is my checkbox. Donot consider Rows(0), at the moment I am just checking value at row 0
I'm using vb.net (2008) with mySQL database.
View 3 RepliesI have a datagridview with 2 columns, one is text box and another one is check box column. My problem is that when i check or uncheck on cell of check box column i just want to show a value of this cell but it show opposit to it real value, it mean that when i check on this cell its value is false so this result is not correct .
View 3 Replies