I have a DGV with a Button Column. I need to be able to disable or freeze a single cell (or cells) in that column so that its button can't be clicked, but I haven't found a way to do it. It this possible?
View 4 RepliesIs it possible to disable cursor moving from cell to cell in datagridview?
View 5 RepliesHow to disable Cell Highlighting in a datagridview,Highlighting should not happen even if I click on the cell.
View 3 RepliesMy datagridview consists of Three columns.
1st column is Datagridviewcolumn
2nd column is datagridviewcheckboxcolumn
3st column is Datagridviewcolumn
so 3rd column i made as readonly.so i need to enable the 3rd column cell based on the checkbox check properry
so i am generating datagridview column dynamically and populating values in the datagridview dynamically.so my need is after populating the value if i check the check box the current row of the 3rd column cell has to be enabled. so how to do this. please show me some sample code if there any. please
I have a DataGridView that based on certain conditions certain columns or rows or cells need to be locked/disabled but the data in the columns or rows or cells needs to bvisibleNow let me define what I mean by lock/disable; the user cannot click on any cell that islocked/disabled, if the use is using the arrow keys the selected cell cannot move to a locked/disabled cell.So this means that setting the cell as read only will not work, the user can still place the cursor on that cell.
Private Sub DataGridView1_SelectionChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles DataGridView1.SelectionChanged
If DataGridView1.CurrentCell.ColumnIndex = 0 Or DataGridView1.CurrentCell.RowIndex = 0 Then
[code].....
Have this code so that when a checkbox in a column of my datagridview is checked, then the corresponding cell in column 2 (of the same row the check box is in) will turn blue with font color white.
[code]...
I'd also like to add a line so that as well as the cell going blue, the bottom border of the cell disappears, so cellborderstyle = none.
I have a DataGridView with several columns. One column is a TextBox column named "Status". This column can only show one of three values: 'Final', 'Ready', or 'No Reportable'. I want to have some code that would turn the TextBox cell into a ComboBox cell when the user left-clicks on the cell to allow the user to choose one of these three options. When the user clicks elsewhere or the cell loses focus I want the cell to change back to a TextBox cell.
Here is what I have so far, but the code throws an exception indicated below Plus, I don't think the code would remove the combobox when the cell loses focus.
Exception: "Provided cell does not belong to this DataGridView control."
Private Sub dgvCalculatedResults_MouseDown(ByVal sender As Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles dgvCalculatedResults.MouseDown
Dim ht As DataGridView.HitTestInfo = Me.dgvCalculatedResults.HitTest(e.X, e.Y)
[Code].....
I have a problem with my datagridview.
here goes:
1. I have a datagridview that displays borrower's information.
2. upon click on the leftside button of the row (fullrowselect) the controls are auto populated with data. (userid, library card no. etc..)
3.here is my datagridview cell click event
Private Sub grdBorrowers_CellClick(ByVal sender As Object, ByVal e As System.Windows.Forms.DataGridViewCellEventArgs) Handles grdBorrowers.CellClick
With borrowers
Try
[Code]....
4. the problem is when i click on a cell that is not an integer it creates an error.
5. my idea is to disable the cells inside the grid. only userid or the leftside button should be enabled. how can i do that? is that possible?
How can we disable a cell of datagrid in vb.net and how to show date in datagrid cell in vb.net
View 3 Replies1. How can we disable the cells of a datagrid???2. How can we show date in a cell of datagrid???I have used this peace of code on for load event
View 6 RepliesI have a Datagridview called DgvReturns. which contains two fields,
1) Yes - checkbox (boolean)and
2) Received Date - textbox (DateTime)..
What I want to do at run time is that when a user Checks the Yes checkbox Received Date is populated with the current Datetime.
In cellEndEdit event I need current cell editedFormatedvalue ( well it is done) now my question is can we get the old value of the cell in this event or have to handle some other event for this means let I have a cell in which current value is abc and when I edit it it become def now I want to get both the values in cell end edit event ( or any else ) but finally I have to perform task on cellendedit
View 1 RepliesI have a datagridview and it has 8 columns as textboxcolumns. I am handling their cell validation with cellValidating event.
My question is that if cell validation fails for 3rd column of the datagridview then the focus should move from 3rd column to 1st column of the datagridview. How can i do this?
I have tried datagridview.column(0).selected = true, when validation for 3rd column fails, but this is not working. Focus still moves to the next cell. I can stop the focus to the current cell with e.cancel=true but i want it to move to the very first cell of the datagridview.
I have a datagridview and it has 8 columns as textboxcolumns. I am handling their cell validation with cellValidating event. My question is that if cell validation fails for 3rd column of the datagridview then the focus should move from 3rd column to 1st column of the datagridview. How can i do this?I have tried datagridview.column(0).selected = true, when validation for 3rd column fails, but this is not working. Focus still moves to the next cell. I can stop the focus to the current cell with e.cancel=true but i want it to move to the very first cell of the datagridview.
View 13 RepliesI have a DataGridView where Cell_Validating is being done. I have a Cancel button on my form that allows the user to exit out of the DataGridView changes. The problem is that if a cell was currently flagged as in error, I cannot exit and remove columns from the DataGridView. I get the following error: Operation did not succeed because the program cannot commit or quit a cell value change. Is there a way to cancel the validation once the focus has been removed from the DataGridView? Here is my Cell_Validating
[Code]...
I have just found that if a DataGridView image column's size (height & width - in pixels) is smaller than the image's original size (in my case all images are exactly 180 x 180 pixels) at the time the cell is populated then the image is automatically being converted to a lower resolution I assume to fit the image completely within the size of the cell). How can I stop the automatic scaling of the image?
The image below show the same file displayed twice, both at 60x60 pixels ('Thumbnail' column) and a blowup of the image (PictureBox populated via the CellMouseEnter event) to it's right. You'll notice the resolution of the first blowup is far less the the second. so, what made the difference in the resolution of the blowups is? In the second blowup's case I'd first stretched the image column's width to ~180 pixels and set the row height to match (via the ColumnWidthChanged event) then populated the DataGridView then stretched the image column to 60 pixels (its minimum).
2 of the columns have data added to them separately from 2 textboxes so I want to disable these 2 columns and also have it so that when I tab through the cells the cursor does not enter the disabled columns but goes directly to the next enabled column of the row
View 2 RepliesWhen I check the Checkbox in datagridview and click Save button I want that the Checkbox in that cell would become disabled to uncheck or check again or invisible at all. Is that possible, what could you advise ?
I guess it should be smth like this (my datagridview shows only checked checkboxes),but it doesn't help, I still can uncheck boxes...
[Code]...
How do I disable copy from a DataGridView. It's a silly security feature.
View 1 RepliesI have a dialog that gets called from time to time. It is only created once, and then shown or hidden. Depending on the current conditions, when I display it, I need to disable the controls on it so that the user does not make any changes.I have code that checks the condition and sets the enabled property to false for the controls. There is a DataGridView control on the dialog, and for some reason, it stays enabled and allows changes. Does anyone know why, or what I need to do to get it to not accept any input?
View 4 RepliesHow can I disable buttons on some rows in an unbound datagridview, or at least make it appear that it isn't enabled? The enabled property of the cell doesn't exist, and the visible property is read only.
View 2 RepliesI am using DataGirdView in my project.I have some queries listed below.
1. I want to add Rowheader' name like
Column 1||Column2
Row1
Row2
2. I want to fix the number of Row like just 2 Rows . And if I edit in datagrid or press enter after editing ,the automatic addition of the next row must be blocked.
I am having a form and datagridview.now the problem is that when form load and iam write something like saniplast so data of datagriview select similar saniplast when i pressed enter so the datagridview_keypress
[code]...
I wish to have a list selection inside a cell of it. like when the cursor is placed in a particular cell and the user hits 'Tab' button in keyboard a list of names & no should be listed and they have to select a particular name, click a particular row in the list form, which in turn needs to fill the cell with the name value.m
View 5 RepliesThere are 3 columns(Count,Item,Price) in datagridview which is bound to a datasource. The count is 1 by default and it should increment by 1 when i click on a button,so the count would be 2 if i click button again
View 3 RepliesHow can I get the value of the first cell of the row of the selected cell or selected row in a datagridview?
View 5 Repliesi have a datagridview which i populate of a dB. i have 3 columns on the dgv Account ID, Account Type and Notes. i created an add record button, that enables the user to add records. Account ID is a numerator in the dB, and i would like to automatically add 1 to the numerator. however i can't get the value of the last cell in the last row. for now i am using
Dim RowCount As Integer = Me.grdAccountTypes.RowCount - 1
Dim AccountID As Integer = grdAccountTypes.Item(0, RowCount).Value
MessageBox.Show(AccountID)
I have a datagrid with 5 columns.2 of these columns will have data entered into them automatically - depending on the entries of 2 textboxes.I can disable these 2 columns ok.How can I have it so that the tab key doea not enter the cells of these 2 disabled columns. ideally I'd like the tab to enter the cells of the abled columns only.
View 4 RepliesHow to do that no one cell is selected in DataGridView at first moment? (There are some controls in my form before the DataGridView and I don't want that any element of DataGridView is selected when the form is loaded).
View 2 RepliesI have a datagridview which have a ComboBoxCell, ComboBox is bound to data,, I want to use it as Traditional ComboBox,, I mean I want to display its Item (from display members) on the base of its value.
For example:
When I do this
Datagridview1.CurrentRow.Cells(4).value = 4 'Cell 4 is the DatagridviewComboBoxCell
It gives me the error that
"DatagridviewComboBoxCell.value is not valid",
But I want that this combobox should Select And Display the item which value is 4.