I want to generate a one page report from the database e.g. a school report, and then dispay results on a document viewer or similar, for easy scrolling. The report page has controls such as the stackpanel or grid. Is this possible? How? Any alternative approach
View 1 Repliesi am using crystalreport document and crystalreport viewer for creating one report this is the code...
[Code]....
using stored procedure "spvatregister" , i am getting the report on report viewer
how can i show the total amnt (amnt is a parameter of spvatregister) of each page on reportviewer
i want same custom header on every page when i print my report, how can i?
View 3 RepliesI'm having a problem with my crystal report with regards to report footer. I want to display the data from the table, column name "Remarks" in report footer but when I try to call the data it doesn't show the remarks. I'm using VB 6 and mdb files as my back end. Is there any command or fundamental that I've missed?
View 1 RepliesI am developing a small application with VB 2008 and MS SQL 2005. For reporting using RDLC reports. Everything is going well except page wise total.I need page wise total on each page and each(all) page wise total should be displayed on last page. I need the report output like this.
SrNo. Amount
1. 200
2. 200
3. 200
[code]....
Note : No. of rows/page are not fixed.For group Total I have used Sum function of rdlc table with scope table_Group2 & for Grand total I have used Sum function of rdlc in table footer with dataset scope.For page wise total I have used textbox in Report footer (=Sum(ReportItems!amt.Value). How to get page wise totals on last page again.
Unfortunately the data that i needed to post on the first page of crystal report can NO longer occupy the needed information that my system require in my report page... i would like to know how can i add page 02 on crystal report please
View 3 RepliesI have list of names in list view with corresponding unique employee id. The user could select more rows. In each employee id I will find it in database in retrieve all the details information and print it using crystal report. What I want is in each employee id it will print in separate pages.Currently using my code, the records of other employee id will append on the current page instead to print in another page with new header and footer. [code]
View 6 RepliesI have list of names in list view with corresponding unique employee id. The user could select more rows. In each employee id I will find it in database in retrieve all the details information and print it using crystal report. What I want is in each employee id it will print in separate pages.Currently using my code, the records of other employee id will append on the current page instead to print in another page with new header and footer.
View 14 RepliesI'd like to show new page per a group in crystal report. Please check my images below
report design
report review
How to set to show one group box per page?
I am rendering an rdlc report to the client directly, tried adding the page number using the code below in the footer
=Globals.PageNumber & " of " & Globals.TotalPages
I am getting #Error when the report is rendered as pdf on the client. Need assitance to resolve the error.
I have a crystal report that works in Crystal Reports Writer XI just fine. I run the report in the application passing the same information that I use to test in the CR Writer and the report is completely blank. No exceptions what so ever are raised in the application.I've opened the report in VS2008 and resaved it and verified the database and still nothing. I have two different versions of the report. The report is using stored Procs and I have verified that it is loading the report because it is accepting the parameters I setup in the report. If I change the name of the parameter I'm saving to something invalid it then throws an error.
View 1 RepliesI am working in vb.net, visual studio 2008, with the crystal reports that comes with it. I have a push model: creating a dataset, putting data into it, making that a report source, and putting the report source onto (or into) a crystal reports viewer control (not neccessarily in that order). It works -- for the first page that's displayed.That report has two pages. If I click on the control to go to the 2nd page (where I have no data displayed yet), then on the control to come back to the first page, it displays with no data -- just the background text is there.I can see my dataset-loading code executing in the debugger, and as near as I can tell the database is no longer giving me back any data
View 1 RepliesI am using a Report Viewer Page in a Asp Project, As my query is big i have Somany columns to be included in the Report viewer. But i am in a position that i cant increase the Page size of the Report to be Correctly fix the Entire Columns in the Report.
View 1 RepliesI open a new window after passing parameters through to it. In this new window is my reportviewer control. I load the control and all displays well, until I click on the VIEW NEXT PAGE button - It reload the report and starts from page 1 again.[code]
View 1 RepliesI have an rdlc report that always produces the last page in blank. In this page, the header and the footer are printed but no data is shown (all data finishes in the previous page). I already checked and re-checked the horizontal and vertical printable areas and all the report definitions fit into these areas (if not, a blank page will be produced in between each page, I guess). If the report has one page, two pages are printed, if there are ten pages with data, eleven pages are printed
View 4 RepliesI have a data-driven many-page print system that works well, each page containing logically what's next following the preceding page. To output a sub-set of pages, how can I avoid outputting pages before the first one that I actually want to send to the printer? To pick and assemble the data correctly my PrintDocument1 process has to run until I reach the 1st page to print, so it would be neat at the end of each unwanted page to 'waste' them - then from the 1st wanted page the usual e.HasMorePages will do the job.
I thought maybe PrintDocument1.Dispose() or PrintDocument1=Nothing might void the early pages I don't want (then looping back internally to construct the next page), but no. Is there another way to 'ditch' pages until the required one is reached? Or do I have to avoid using every e.Graphics.DrawString) statement until I get to the right start point? That would of course do the job, but is pretty clumsy
I am writing a report to an excel template and am trying to insert a page break into the report. Part of my code is included:
Imports msWE = Microsoft.Office.Interop
Dim Rnge As msWE.Excel.Range = excelApp.Range("A20:M20")
Dim excelApp As New msWE.Excel.ApplicationClass
excelApp.Worksheets.HPageBreaks.Add(Rnge)
Now the pagebreak code executes but it does nothing. Its almost as if it is being ignored. Also I have heard that using Microsoft.Office.Interop is not a good idea as it is slow and unstable.
I have a report which looks like this. it will be in PDF format:
the user will input all the different foods, thus every section like NONE, MODERATE, SEVERE will be a different size and thus i need to be able to expand the sections during run time. in order to do that i should probably slice up the image and add different sections during run time. i dont know the proper way to do it.
I am trying to display a report in a ReportViewer. I am using the BindingSource component in which I specified my Data Source. I set the Data Source Instance to the BindingSource. Both Data Source and Data Source Instance are visiblein the ReportViewer Tasks.
However, I keep getting the following error message: An error occured during local report processing. An error has occured during report processing. A data source instance has not been supplied for the data source...
I want to create a report in Reportviewer in Visual Basic .Net (2005). This report generates a list of Userid's but I want the user to enter a userid group which it should display only the users within that group.
I created a View in SQL 2000 and also a stored procedure. The code for my stored procedure is described below
CREATE procedure dbo.display_users_summary
@user_ccsm smallint AS
set nocount off
[Code]......
Possible Duplicate: How to use SubReport in XtraReport? I'm having a problem with my XtraReport it doesnt display the Sub Report but it Displays the main Report
[Code]...
I want to ask how to display the fields in Crystal report from different tables. I have this line of code:
[Code]...
in my report i have a field to display the persons name who generated the report. i have global variable and i take the persons name into that when he log in to the application. how can i display that in my report.
View 1 RepliesI had the following code to display crystal report based on the sql.
Code: Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click conKk.Open() Dim strReportPath As String = "C:Documents and SettingsChee MunDesktopFYPvbFYPCrystalReport1.rpt" MessageBox.Show(strReportPath) Dim mySelect As SqlCommand
[code]....
But the problem occured in objRpt.SetDataSource(mydsSong.Tables("Song")),it stated that no tables is found but my database is having this table.
I am building a small project that saves some data about persons including their photo. I am using access database for portability reasons. I created a crystal report that i want to use to display the data of a person as a print feature. This is the code that generates the crystal report.
Private Sub Button9_Click_1(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button9.Click
Form9.Show()
[code].....
I am very new to SSRS.I have added one Parameter named Date on SQL Server Report.i have set parameter value from aspx.cs code behind file.i have drown that parameter on ReportHeader and i want display CurrentDate value on that parameter and i tried =Join(Parameters!Date.Value,", ") but it displays #Error at runtime.i also tried =Join(Parameters!Date.Label,", ") but it displays Nothing.
View 2 RepliesHow to display the image in crystal report, the image i want to display is the Ole_Object stored in database?
View 1 Replies1] One Windows Form: datetimepickers to accept fromdate and todate respectively.Crsyatl Report Viewer Button to show the Crystal Report.
2]Crystal Report.How to do the coding?I tried from my side and also some1 in this forum also helped it but still not able to do it.
I am trying to display a crystal report form a datagridview. My code is as follows.
Dim dtData As New DataTable
dtData.Columns.Add("ID")
dtData.Columns.Add("Paint Number")
[Code].....
When I run this code I get the following error;
Column named ID cannot be found.
Parameter name: columnName
I have a UsageLogDataSet with dtData datatable set up with all 5 columns added.
i just want to display data's from mysql database to crystalreport and i need codings
View 1 Replies