A network-related or instance specific error occurred while establishing a connection to sql server. The Server was not found or was not accessible. Verify that the instance name is correct and that SQl server is configured to allow remote connections. (Provider: SQL network Interfaces, error: 26-Error locating Server/instance specified)".
View 4 RepliesIf I have a store procedure that call the 'field_name' and 'field_id', but I want to enter the 'field_name' into a form where I need to select information that will be used in a Crystal report. When I enter the 'field_name' it needs to use the 'field_id' as a parameter for the selection of the data on the report. How would I do that?
View 1 RepliesI have the following Stored Procedures create or replace PROCEDURE WEB_AC
[Code]...
First one: At some point in the application I have the valor parameter (of the visual Basic Function) as a string with spaces that is something like "some string with spaces". When this happens, the stored procedure don't update the table. If I execute the SP directly in the DB (with SQL Developer) all works fine. I know it has something to do with the string missing some quotes(') but I haven't make it work yet. Some ideas on this?
Second problem: Sometimes, when debuging the application, if I interrupt the execution, I start getting the ORA-24338 'statement handle not executed' error for hours every time I try to execute it again. I believe it has something to do with an open transaction. But honestly, as I'm new in working with Oracle, I really have no idea what the problem could be.
[Code]...
The store procedure which give me the information I need is:
USE [UCSMIS]
GO
SET ANSI_NULLS ON
[Code].....
When I try to add it to my report it gives an error, is it because of the temp table and how should I go about it?
When calling a stored procedure from vb.net is there a default SQL timeout time if no timeout is specified in the connection string?I am unsure if there is a CommandTimeout specified in the connection string but am going through all the possibilites.
Example if no results after 30 seconds (or more) throw:
`System.Data.SqlClient.SqlException: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.`SQL Profiler says that the script runs and ends in 30 seconds when the program timesout..Tthe script runs without error in about 1 minute 45 seconds by itself in SQL server.
I got a stored procedure that reads a table and insert those data to antoher table. That's the way how it works because the first table imports data from excel using a package with SSIS.In EF4 I imported the SP and create function import:This SP has 2 IN variables and 2 OUT varibales.The IN varibales are parameters and OUT variables are a message and the number of records created.[code]
View 1 RepliesI am using sql server 2008 as database server. I have created "AddTest" stored Procedure and using it in my app,
Dim cn As new SqlConnection(connStr)
Dim da As New SqlDataAdapter("Select * from dbo.Subjects", cn)
Dim ds As DataSet
[code]....
My application produces this error System.Data.SqlClient.SqlException: Login failed for user..This started after I added a stored proc in my dbml file. It works fine in my local enviroment, but throws that error when deploy to staging sever. the user it displays is foreign to me?
View 1 RepliesODP.NET Query - Error manipulating data from Stored Procedure??
View 3 RepliesI have a stored procedure to update a table, but needs a couple of values from another table.
the first two selects get the value from the table and then are used in the update statement.
The select statments:
Select @iStatusDropDownValueID = iDropDownValueID
From DropDownValue
Inner Join DropDownValueType On DropDownValue.iDropDownValueTypeID =
[Code].....
First, the values that are retrieved by the first two select statements are always the same. So they could be passed in by the code itself. I don't know that this will speed things up at all, just make the entire stored procedure better and easier to read.
Second, if the "Value Name" should change this store procedure will break (which is possible, but not often).
I am looking for any insight into the Best Practices for this situation.
i am trying to add the the text in the textbox with a stored procedure in mysql this is the error: [Code]
View 14 RepliesI have sql server2000 encypted stored procedure. I can not modify them. Typicaly all the procedures manipulate row by row different tables using cursors etc. When the stored procedure is executed at the Query Analyser screen, I see error being thrown in between but the procedures continues till all the records have been processed. This behavior is acceptable to the client. I now need to automate the process using VB.net 2002 windows application. I call the procedure from vb.net but the program throws runtime error on the 1st occurance of a error in the stored procedure.
View 2 RepliesI am new to nodes() method. I am getting the foloowing syntax when trying to create a stored procedure using the nodes() method.
The syntax error:
Msg 170, Level 15, State 1, Procedure spmTestSelect, Line 19
Line 19: Incorrect syntax near '.'.
[code]...
Update with SQL Generating this Error: Could not find stored procedure 'False'. I'm not using a stored procedure i'm doing a simple update
Dim cmd As New SqlCommand
Dim connconnection As New SqlConnection(conn)
connconnection.Open()
[code].....
I have an application where I make calls to multiple SQL Server Stored Procedures,keep the user aware that the program is still running and how long the specific SP has been running so that they can abort it if it's taking too long.
My initial attempt was to wrap up each call to the SPs like this example:
Dim cm As SqlCommand = Nothing
Dim Conn As SqlConnection = Nothing
Dim Tran As SqlTransaction = Nothing
Dim PrevTime As Date = Nothing
[Code]...
Access 2007 and Stored Procedure. I keep getting this error: Parameter [@MyNumber] has no default value.
[Code]...
I want use a stored procedure in my project but I have no idea about it. Please could you tell me a little bit about how to use I can use one in my vb.net application ?
View 2 RepliesI have noticed the following but unable to understand why.Whenever a procedure is called in .net it takes more time than when it is called subsequently.Even if a procedure is called after some interval it takes more time than it takes if it is called quite frequently. i am not asking about sql query or sql command. any user definded function or user defined method takes much more time to finish when it is called occasionaly. but when the same procedure is called quite often it finishes a lot faster. why?
View 1 RepliesI am currently building an ASPX webpage for internal use. Basically, there are two buttons on this page and I need each one to kick off a different stored procedure on our local SQLServer based on the needed task. these stored rocedures do quite a bit of work and take 3-5 minutes to finish running. In neither case do I need any kind of gridview or other output from these stored procedures, as they are simply crunching/cleaning data that will populate some tables that the user will then use to complete their task. There are also no inputs or parameters needed.
So i'm OK at ASPX and pretty good at SQL, but have no idea on the VB code behind page. This is what I have ben able to put together based on 3 days of googling. i think i am close but can't quite get across the line.
CODE:
I'm not sure if you need to see any of my ASPX or my SQL. both work fine on their own, but i am not able to get these buttons to work.
I have a stored procedure that when I run it within my application it times out, but when I use Management Studio and pass in the same exact parameters, the stored procedure executes under a second. I had this exact same issue with the same stored procedure before, and all I did was recompile it, and it fixed the problem, but I do not want to keep having to recompile this stored procedure every few days or so. Has anyone else ran into this issue before?
Another note I would like to mention, is that I'm currently working on a test database, so I'm not inserting, deleting or updating any of the records that the Stored Procedure is using. So the database itself is not changing, but for some reason the Stored Procedure is showing degradation, and at the most we have 2 users in the database at a time.
Below is the code I use to call the Stored Procedure from my app.
cmd.CommandText = "sp__RECAP_SELECTION_GET_GRID_RECORDS_RECAP_TYPES"
cmd.Parameters.Add("@FK_KitchenID", SqlDbType.SmallInt).Value = cmbKitchenCustomer.KitchenID_SelectedPrimaryKey
[Code]....
As I mentioned, if I run the Stored Procedure within Mangement Studio, it runs with no problems. Also if I recompile the stored procedure, it runs fine within the app, but after a few days, the stored procedure starts to timeout again within the app and I need to recompile it again.
I am pretty new to VB and I am not sure why this is not working, basically I am trying to run a stored procedure from my web code. The sp runs just fine in SQL, I've tried it several times so I am sure that is not the problem. I don't want to return any results, I just want to see an "ok" statement if it runs and an error message if it doesn't. The code I am using for the lables (warnings and confirmation) is reused from earlier on the same page, the same goes for the validations (valUpload).
[Code]...
I am using SSMS 2008 and VB. I'm a novice VB developer. I am trying to display results of a simple stored proc on my ASPX page. But I get the error below. Here is my code behind for the ASPX page:
>MsgBox(GlobalFunctions.GlobalF.GetDevSQLServerStoredProcedure())
And my code from GlobalF namespace:
Public Shared Function GetDevSQLServerStoredProcedure()
Dim conn As SQLConnection
Dim DSPageData As New System.Data.DataSet[code]....
Where can I find information on creating or how can I create a button to execute a store procedure
View 6 RepliesI am trying to get some data relevant to a stored procedure (or funtion) back from a database using .Net. The first thing I need to be able to do, is get the stored proc from the database and turn it into string format.The information I need is: The return set of columns, tables used within the SP, Stored Procedures called from the SP. The only way of doing this at the moment that i can think of, is though parsing the text and looking for keyword matches.
View 3 RepliesI am a newbie to vb.net and sql server. My responsibility is to build a vb.net function that when a scanner scans an object, it would take the scanned string and call a stored procedure to get a row of data that match that scanned string and pass the data row to an application that would print out a label.below is my vb.net and sql server stored procedure script
1. Do I have to come up with a public class in order to store my row of data to pass it on to a different vb.net application that would take that data row and print out a label?
2. In my stored procedure, how would I return the founded data row to the vb.net function?
Module makeLabel
Public Class AMGCdata
Public fileName As String[code]...........
im trying to search a value with the help of stored procedure But it is not working
Imports System.Data.SqlClient
Public Class frmStoredProcedure
Dim cn As SqlConnection
[code]....
I am calling this sub and it doesn't execute. The stored procedure is fine.
View 3 RepliesWhy I can NOT get the return value (Scope_Identity) by executing my own Stored procedure (SQL Server 2008) via this below code written in VB.NET 2008? The SP inserts the new record into Table1 but I have 0 as the return value!What's wrong with it?here is my vb.net code and my SP:
Public Function Insert(ByVal Obj As entity, connectionString As String) As Integer
Dim ScopeIdentity As Integer
Dim Connection As New SqlConnection(connectionString)
[code]....
Where in the body of a function do you code a stored proceedure? Does the storeProceedure "spInsertVendor" replace the sql commands? Here is my code:
Private Function AddVendor(ByVal vendor As Vendor) As Integer Implements VendorService.AddVendor
Dim connection As SqlConnection = PayablesConnectionFactory.GetConnection
Dim insertStatement As String _
= "INSERT Vendors " _
[Code]...
I'm having problems trying to create a new stored procedure.I am using sql 2005 express. I also have sql server management studio express installed.I open up the studio express and goto the database that i want to use to create the stored procedure. When I right click i see a sub menu, but don't see a option that says create stored procedure ( or any option that has anything to do with stored procedures ).Am I right in saying that I need the full version of visual studio to be able to work with and create new stored procedures.I am also told that sql server comes with built in stored procedures. Am i right in assuming that I can call these without having visual studio installed. And if the answer is yes, then how do I find out the name of these procedures, the parameters they use and what each particular stored procedure does.
View 3 Replies