what can i do about this all of my line of coding are correct when i run the program this is the error i got The item "obj\Debug\WindowsApplication1.CkoudResouces.resources" was specified more than once in the "Resources" parameter. Duplicate items are not supported by the "Resources" parameter.
I try to compile a project with msbuild.exe I have this error :
vbc : error BC30136: Error creating Win32 resources: Error reading icon '"Recycle Bin Empty.ico"' -- The filename, directory name, or volume label syntax is incorrect.
This icon is the Application icon which is in the same directory of the project.vbc is started with /win32icon:"Recycle Bin Empty.ico" parameter.Don't know why MSBuild can't reach the file.
error: the item "objdebugassociateassist.frmdbsetup.resources" was specified more than once in the "resourceS" parameter. duplicate items are not support by the "resources" parameter.
I don't understand. Till now this little app was working ok. Error1 The item "objReleaseRadni_nalozi.GlavnaForm.resources" was specified more than once in the "Resources" parameter. Duplicate items are not supported by the "Resources" parameter.Radni nalozi What gives?
Dim para As New CodeDom.Compiler.CompilerParameters Dim Ressources As New List(Of String) Ressources.Add(Application.StartupPath + "data.dat") Dim temp As String = Path.Combine(Path.GetTempPath, Path.GetTempFileName) If Ressources.Count > 0 Then
I am processing a local message queue and every now and then getting an "Insufficient resources to perform operation" error message when there is over 2GB RAM free.The queue is very small (often only a couple of items (if that) and never exceeds 50 items), with the items themselves being just a very basic class that consists of a filename (as a string), two integers, two booleans and one enum (i.e. very little actual data)In order to check the size of the message queue, I have a timer that ticks every 5 seconds, and when it does calls the following code:
Private Function GetQueueLength() As Integer Dim QueueLength As Message() = ProcessQueue.GetAllMessages Dim Length As Integer = QueueLength.Length[code].....
the story goes something like this:i have embedded resource file, a vbs script.i have an error when i use writeallbytes and it says dimensional error cannot be converted to bytes something like that so i decided to make a module instead of writeallbytes,what my program does is it writes the content of the script to textbox and after that this data will be written in a script and will be save on drive C: as .vbs.that is perfectly working on my codes
I have been able to use my.resources perfectly, no problems at all. all of a sudden, i try to use resource (i have done EVERYTHING EXACTLY the same as the way i have been using for the last 1 and a half years) and i get an error saying the file does not exist. its there, i only need to type my.resources.s and it already selected the resource i want. it says the file doesn't exist. why? also, the resource is called settings.dat. could that be the problem, don't think it is. i even tried a picture, but it still says the file doesn't exist.
It says: Could not find file 'C:Users[username removed]DocumentsVisual Studio 2008ProjectsdiskSaverdiskSaverinDebugSystem.Byte[]'.
I worked out a way around it (i worked out how to use my.settings in stead), but i haven't worked out why my.resources won't work.
i'm unable to debug my project that i made. i save it and everything, but it just won't playit says Warning 1 Could not find type 'WindowsApplication1.My.Resources.Resources, Time table'. Please make sure that the assembly that contains this type is referenced. If this type is a part of your development project, make sure that the project has been successfully built. C:SchoolIPTTime table, using 2 loopsTime table, using 2 loopsForm1.Designer.vb 123 0 now when i open it up and try to debug it , it comes up with an error, i even try referencing it but it does nothing ,
I'm making a project for school with a group of classmates. It is an application that needs to reference quite a few pictures and strings from My.Resources. I don't know what the problem is but, whenever I run the program, I get a message that reads this: "There were several build errors. Would you like to continue and run the last successful build?"
COM Reference 'WMPLib' is the interop assembly for ActiveX control 'AxWMPLib' but was marked to be linked by the compiler with the /link flag. This COM reference will be treated as a reference and will not be linked.
I seem to have developed a strange problem with one of my projects I think this came about because a renamed a form in a windows application. Now whenever I try to run the application I get the error message: -
Error 1 The item "objReleaseDvdDatabase.frmDVD.resources" was specified more than once in the "Resources" parameter. Duplicate items are not supported by the "Resources" parameter. DvdDatabase frmDvd is the one I renamed to frmMain.Try as I might I cannot seem to find the "Resource" parameter mentioned in my IDE, VS Pro 2005,
I got an error when I tried to open the designer for one of my forms in Visual Basic 2010 express and I had the option to ignore it so I clicked that (which I regret doing so much) and now my form is erased,but I still have the code for it.I tried right clicking and selecting show designer but it just brings up a blank form. I had a datagrid control called "DataGrid1" and when i tried adding a new control to the blank form it says that "DataGrid1" already exists but it doesn't.So after I resolved the first 85 errors I got one more that doesn't make sense:
Error 1 The item "objx86DebugWindowsApplication1.frmMain.resources" was specified more than once in the "Resources" parameter.Duplicate items are not supported by the "Resources" parameter.
Error1 The item "obj\x86\Debug\MassText.MassText.resources" was specified more than once in the "Resources" parameter. Duplicate items are not supported by the "Resources" parameter.MassText.
I have one form in my project, and the project built and ran just fine until I added a method to it. There are no other errors. I tried deleting the files from the project folder it claims duplicates of, and when trying to rebuild, the files are just added back and the error is thrown again. Additionally, I have also tried deleting my *.resx files, and the project will not compile and run without them either.
I recently put one of my projects onto a memory stick to use on my new laptop which I now have. I installed Visual Studio on the laptop and opened my project. I could edit the code and it would work fine. But when I wanted to edit the actual design, it would give me this error when compiling:
Currently I am just assigning my files as strings, and I know this is the wrong way of doing it. If I want my program to read one of my resource files as text, how would I do that?
I've been working with VB for some time using my.resources.I recently installed it on a new computer(Windows 7 ),everything works fine...well almost.
I'm trying to teach my cousin how to change images in an image box using a button.I did it on my computer and it worked,but it wont work on his.Exact same code and images.
Here is what I did:
After having everything set-up I import the 2 images I want to use.
Then inside the click event for the button I write picturebox1.image = my.resources.picture1 "and here is where it doesn't work.It says I don't have any images in my resources named that.Instead it gives me two options Culture and ResourceManager but it doesn't show any of the images I previously imported.
*picture1 is the name of my image
I have no problem with the code(it works),I don't get why it's not seeing the imported images on my cousin's computer.
I need to be able to run a .exe within the resources i have a .exe i built a while back in vb6 and i need to be able to run it from resources so in the final installation build it would run properly on every computer that it installs on.
I am a beginning programmer and having a problem with picture boxes and resources which I want to use on the opening screen/form of a program. I have 4 arrays, each with 25 pictures(JPG); I want 4 pictures to appear on the form and to scroll through them using the form load event or a button. The problem however is I get build errors when I have more than 6 pictures in each array. the pictures load if there are 6 or less; more and it's a problem. I have considered some sort of corrupted picture but have changed pictures and get the same result.Is there a limit to the amount of memory that can be committed to resources?
I have a VB.NET program with lots of embedded resources which are images. Is there a way to get all the resources in an array so I can acces them in a for loop?I currently have to do it this way:
i want to add a image to resources...actually i am giving user facility to add his logo into the report..so i am giving him a picture box to select th image he wants to add..then my question is how can i ad that image to project resources proramatically without erasing previous resources..
Currently i have created another resx file to add logo in it.but there is a threat that user may delete that file if he gets the location of that file..so i wanted to add image into project resources itself..
lets say i have a program that consists of a form and 2 buttons.Now i want to make a theme.I want the background to change and the button background icons to change
(Button1 makes the theme Green and Button2 makes the theme Red)
Suppose i have : C:ThemeGreenButton1green.Picturefile[code]....
ATTENTION: What i want is that the images can also be shown on another pc user that doesn't own them.(Of course this is not the case.I just want to Understand how i can add some files to resources)
I am using VS2010 and in all of my projects "My.Resources" is available and shows all the files that are in the "resources" section of the project. In this one project I have a bunch of resource files in the project but the compiler complains:
I want to add 20 small exe files in Resources. The total size is only 1.5 mb. I've added a couple of exe files and I see them in the "Resources" in Solution Explorer.
I've tried to start with: Process.Start(My.Resources.PROJECT1.EXE)
But I got an error: 'EXE' is not a member of 'System.Array'. (This is about the VB, Visual Studio 2010).
I imported an image with a conflicting name as an image file in resources. Then the project crashed. I can't open the resources. It only shows a message as "There is already another resource with the name 'Cr'."The compile errors show that "'Resources' is not a member of 'My'".