I use VB 2010, Office 2003 and Windows 7.All the office programs have worked fine on their own for several years, but when I try toconnect to Excel or Word via .net coding (That will work on other systems) the program fails because the
View 2 RepliesI know this is a very noob question but would it be possible to find a word in my coding and replace it with three lines?
[Code]...
So far I can only replace it with "ex1.Message) Finally Application.exit" but it's going to take me forever to go through my coding to change it. I'm not sure what character I could use to start a new line in between "ex1.Message)" and "Finally" and "Application.exit"
I think I have a simple program to create, but I just cannot find the syntax to complete it.Effectively, what I'm trying to do is search down a column where there are cells with numbers and cells that are blank. I want to search down the column and find where there are two or more cells that that have numbers, one after another. I want to add a row beneith the last number and then add up the total of that batch of numbers in that column were searching down. I know that I'll be using a loop to step down each cell in the column to check on the contents of the cell. Also I want the loop to go from the top of the colum to the last record since the list length will frequently change.
View 5 RepliesI am currently working on a program, that you enter certain values/text in and it organises it into a word document automatically,
I found a code online, which has worked a treat, However I'm wondering what lines of code I would need to:
1. Add Bullets or Numbers
2. Add a new line of text (I can add a new paragraph but I don't want a huge space between the two lines)
3. I have around 20 check box's is there a quicker way to check which are selected then write the text in word or do I have to write alot of If Checkbox1.Checked = True then, etc)
I've created a User-form in excel and I need help in the coding part of it.Currently I have coded the User form, as shown below:
Option Explicit
Private Sub cmdAdd_Click()
Dim ws As Worksheet
Dim r As Integer[code].....
The section which says 'Find first free row from A21' up to'Cells(r, 4).Value = Me.txtQty2.Value' (highlighted in bold) is where I need help. I currently have 3 combo-boxes called 'cboProduct, cboProduct2 andcboproduct3' and next to each one of them I have a textbox called 'txtQty1,txtQty2 and txtQty3'. I am trying to get the first combo-box to find the first free row starting from A21 and go to cell B21 and the first textbox to go to D21. For the second combo-box to find a free row from A21 and go to B22 if B21 is used and the same applies to the textbox , if D21 is used to go D22.This also applies for the third combo-box and text box. However my coding doesn't work.
I've been tryin' to develop macro, that can find table in the word and then copy it into the excel. Now it works, the only problem is, that is only the first row, that get copyed...
example (cell /w three lines in it):
Today is great day
Today is not a great day
Today, it is outrageous day
and with the code bellow, I get only Today is great day
Code:
For Each tTable In ActiveDocument.Tables
n = 1
With tTable
[Code].....
is there any function as "countif" to be used for excel file from vb.net coding?
View 4 RepliesImports System
Imports Microsoft.VisualBasic
Partial Public Class _Default
[Code]....
this is the code to convert word documents to excel. but i am getting error at underlines portion..the error is name not declared what should i do..I got thios code frm net and i just pasted it in visual studio..
I m new in programming and Im trying step by step to build my first program. I use Microsoft Visual Basic 2008 Express Edition with SP1. All I want to do is to give a button by pressing it, the ability to copy all the text from a word document into excel.
I'm using vb.net to check that certain Excel or Word documents exist in a folder.
EG
strFileFound = Dir("C:TestFolderMyExcelFile.xls")
strFileFound = Dir("C:TestFolderMyWordDoc.doc")
If the documents are created using Excel 97 or Word 97 the files are found. If the the documents are created using Excel 2007 or Word 2007 the files are not found.
I have checked the permissions between the two different versions and they appear to be the same.
why Dir dosen't work with Excel 2007 and Word 2007 files?
i am trying to create an app that will do an EMAIL mail merge for me in vb(.net) using excel as the data source and word for the template.
I have the following so far which merges the data and template but I have no idea how to send the result out via email.
Private Sub DoMailMerge()
Dim w As New Word.Application
Dim d As Word.Document
[Code]....
Are there any way to do so? I prefer to use VB.NET or Java and try to avoid to use VBA.
View 1 Replieshow to open MS Word and MS Excel in VB2010?
An can you give any site for referrence.
I've looked through some of the related topics to this newly created thread but none have answered my question. Refer to the following code below:
Imports Microsoft.Office.Interop
Public Class Form1
'declares the following Word and Excel variables as public
[code]....
I'm developing a small vb application that will enable a user to select an excel spreadsheet as the source data and a word document as a letter template then create a mailmerge from the two.It's all working fine apart from when the mailmerge runs, a dialog box pops up asking for the sheet to be selected. The list of options is blank until the 'options' button is clicked and 'system tables' is selected. This is a word thing but I'd like to turn this off, if possible selecting the necessary options programatically from within my vb application.
My opendatasource code is:
.OpenDataSource(Name:=sourcefile, LinkToSource:=True, SQLStatement:="select * from 'Sheet1$'", _
[code].....
I am creating a WorkSheet from code. I need my columns to word wrap and not run over (see red arrow below). Not really sure how to do it. Tried to set it for the range of columns with no luck. Here's the current output:
Here's where I try to set it:
Protected Sub Button1_Click(sender As Object, e As System.EventArgs) Handles Button1.Click
Dim xlApp As Excel.Application
[code].....
I have a sql table with a binary field where any kind of document can be stored. I'd like to show them using webbrowser (or PrintPreviewControl if possible). The only way I found was to save the stream as a file and then navigate with the webbrowser, but when I navigate to an Excel file and then I navigate to any other file, my system reboots (I tested in other workstations -W2000 and XP). I'd like to load the webbrowser with the stream without having to save it as a file. Or show the stream on a PrintPreviewControl or similar?
View 1 RepliesI am thinking of preparing an application which will compile few excel, word, pdf files kept in c:est.I know coding in excel and i am new to vb.net. I wish to know is this possible and better to use vb.net to complie some excel, word, pdf files?
View 6 RepliesI would like to view excel and word document from web browser using VB.Net The excel and document are stored in my database.
View 4 Repliesopen and read and write and save to Excel and word documents in a program if the machine that is being run on does not have either of thies apps installed. Are there files that I can include in my application that it could be worked on in my application and not need word or excel?
View 3 RepliesI need to be able to write info out from Excel cells to a Word Doc. Can this be done and can it be done without having the word file open?
View 3 RepliesI'm developing a program that handles money, and there is a pre-made excel spreadsheet that I am to be transfering data into specific cells. How can I go about telling my program to write specifc data into specific cell numer in excel? Also, how can I get my program to write into specific areas of a MS Word Template (my program will generate letter with the same template just different names/addresses/valus)?
View 3 RepliesSay we have a DataGridView on the main form. I can chose to establish its properties by code or by selecting them in the Properties panel. Is there a difference between these two techniques, a loading time penalty in any of the cases especially?
View 5 Repliesi have displayed my table contents in datagirdview in windows form application using vb.net. my database is ms access. now i want to export these records into MS word or MS excel. how do i do that? any open code out there?
View 1 RepliesHow Can I export Date from datagrideview to MS Word and MS Excel.
View 2 RepliesI have to make a calculator that exports the data to a word/excel table -i'm using Office 2007- and i don't know how to create the code.Here's how it looks like and that's how the table should look like (i "masked" some of the parts cause they're not really important):
View 3 RepliesI'm unable to copy/paste items from my listbox to any document (Excel, Word, .txt). I would need to select multiple items in the listbox. I searched for it but there seem to be multiple vague answers around there.
View 1 RepliesI already exporting contents of my datagridview to excel and word but I need to format one of the column of my datagridview. That column is "Amount". In my datagridview, it displays like this "122234". I want to display all the value in that column in this format: "122,234.00". I already tried to format it to number("N") in my datagridview but when I exported it to excel and word, it shows no format.[code]
View 4 RepliesCan anyone point me in the right direction for a good book or web site for Word and Excel Programming for VB. I'm not talking about VBA, I need to "work" with them from within my program not from within word or excel. I need to upgrade programs that were looking at Office 2000 and we're going to 07 or 10 not sure yet but figured I could at least get a bit of a jump on things.
View 2 RepliesI need example code or even a 3rd party object that will allow me to get to an excel object embedded in a word doc. I have already tried Aspose and they do not have the capabilities yet. Has anyone done it or do you know of a 3rd party object that will?
View 2 Replies