I know this is a very noob question but would it be possible to find a word in my coding and replace it with three lines?
[Code]...
So far I can only replace it with "ex1.Message) Finally Application.exit" but it's going to take me forever to go through my coding to change it. I'm not sure what character I could use to start a new line in between "ex1.Message)" and "Finally" and "Application.exit"
I have a program that will read a text file and put information from the text file into multiple text boxes. What I am trying to do now is be able to change the values in the textboxes and be able to write the specifc changes back to the text file. One way I though of doing that was using a while loop and copy the lines of the text file to another text file, then when it finds the line that has the specific change from the text box, make the change and continue writing the line until it reaches the end of the file. Then I was going to copy the file and overwrite the original, escientally making the change to the new file. Right now it will make the new file but will just make a blank text file. I think the problem is in the while loop statement but I am not sure. Here is the code below:
Code:
Private Sub submitButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles submitButton.Click
Dim trackname As String
[Code].....
A
/n
/n
/n
.
.
B
Now there can be n no of lines between a and b have to find such content and remove A and B
Let's say I have an object that contains a Word property and a Sentence property. The sentence must use the word, and I want to replace the word in that sentence with a link using a public function (say, GetLinkedSentence). The catch is maybe the sentence uses a plural form of the word and maybe the "word" itself is actually a phrase, or is even hyphenated. There's no length limit to the word either. How do I find and replace this word (in ASP.NET, preferably VB) with a link [word])?
View 2 RepliesI have a tab delimited .txt file, I am reading successfully. Reading first line and split into array. Through the loop I am checking the duplicate column name.
Now I want, if duplicated word found, how can I replace the second one. Suppose my file contains
Cell Site Cell ID Cell ID Site Detail
1 A 1 A1 ABC
2 B 2 B2 XYZ
I want to replace second Cell ID to Cell ID_2.
Cell Site Cell ID Cell ID_2 Site Detail
1 A 1 A1 ABC
2 B 2 B2 XYZ
I want to open an existing document, find & replace some words and keep it's format as it is. the following is my code.
Dim oWord As Word.Application = CreateObject("Word.Application")' Open word document
Dim docFile As String = vReportPath & txtInsRptNo.Text & ".doc"
Dim oDoc As Word.Document = oWord.Documents.Open(docFile)
Dim oTable1 As Word.Table
[Code] .....
i have created a template xml file witch contain some words like {contentname}.i need to replace such a tags with my values. how to search such a words and replace using filehandling in vb.net my xml templatefile is like this:
<!-- BEGIN: main -->
<?xml version="1.0" encoding="UTF-8"?>
<OTA_HotelSearchRQ xmlns="http://www.opentravel.org/OTA/2003/05" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
[code]....
I try to make a find/replace in a existing word document using vb.net. Here's my code:
[Code]...
When running the code I get a AccessViolationException on the codeline where the Range.Find is called... I use VSTD2008 and Office 2007 on Windows 7. I have also tried running the code on a machine with Office 2003 which was successful. So if anybody could tell me what I have to do differently that I get this working with office 2007 I'd be very glad!
I am looping through a word doc where I need to find a string to replace and these are in text box's so I thought I could do something simple like this but its not working.
vb
For Each oRng In doc.StoryRanges
Do
strTxt = oRng.Text
If strTxt = "textToReplace" Then
[Code] .....
i have a problem in locating bookmarks which are defined inside the table cell. Each table cell in my word document can contain multiple textboxes. I need to fill text in each of these textboxes using word automation. I tried placing bookmarks inside these textboxes for each cell and tried to replace using Word Automation. But unfortunately, i cant locate / replace the bookmark using the following lines:
cell.Range.Bookmarks.get_Item(ref oBookmark).Select(); //this is throwing exception as it couldnt find bookmark in cell.Range.Bookmarks list.cell.Application.Selection.InsertAfter("New Text");
[Code]...
I have a bunch of object variables which are all initialised in their declarations such that:
Private _myObject As New ThisObject("SomeString")
where ThisObject is one of a number of object types, but all are initialised using a string.
I would like to use the Visual Studio Find/Replace dialog box to search for "As New" then replace everything from "As New" to the first set of speech marks with some text such that:
EDIT
My original example could be solved using other methods. This example is more representative of the actual problem:
Private _myObjectA As New ThisObjectA("SomeString")
Private _myObjectLongName As New ThisObjectLongName("SomeString")
[Code]....
So i am working on something for school. And we have to make a program that has 2 buttons, 2 text boxes used for input and a label used for output. One button is New Customer wich displays this in the output label (named totalLabel)
Public Class Form1
Private Sub newButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles newButton.Click
[Code].....
I use VB 2010, Office 2003 and Windows 7.All the office programs have worked fine on their own for several years, but when I try toconnect to Excel or Word via .net coding (That will work on other systems) the program fails because the
View 2 Repliesmake a program to replace the word followed by the selected. But I got stuck at the start..An Example:"My name is Dunley Mike and my father, Dunley Robin are on a holiday at the mountain. There they will meet the uncle Dunley Harry." So what I want to do is to loop through the text for the word Dunley (Underlined) and replace the First name (Bolded) (Mike, Robin, & Harry) to 'family'.
View 9 RepliesI am trying to write this loop to find the word start and then insert a word in a column until it sees stop and then go through all the data and do that.
[Code]...
how do i replace all new lines in a rich text box to </br> ?
View 1 RepliesI am currently using the code below within a VB.Net application to find specific text in a Word document. The text is surrounded by symbols represented by the character codes in the .Text statement. The code below is working fine. The issue now is that sometimes the desired text within a document has been marked for deletion and appears as tracked change within the document. I would like to find only the desired text that has NOT been marked for deletion. Does anyone know of a way to determine if the found text is a deletion?
[Code]...
I have used Webbrowser control in editable mode.I am using IHTMLTxtRange for find a word and replacing it with other word.I have to find and replace internally in my code.Following is my code:-
Public Sub FindReplaceText(ByVal sfindText As String,
ByVal sReplacetext As String)
Try[code].....
It works fine for all find and replace except if the word contains vbnewline.E.g If in webbrowser control I enter 'Hii <vbnewline> Hello'The above two words contain Enter key(i.e vbnewline) between them.If I pass following string to my Method it doesn't recognize the whole word and doesn't replace the word. I have called my method as
FindReplaceAll("Hii"+vbnewline+"Hello","HiiiHelloReplaced", False, False)
Does IHTMLtxtRange support vbnewline in Findtext method?If not how can i do? All the above Find and repace need to be done in code and not by popping up the form for find and replace
I am currently working on a program, that you enter certain values/text in and it organises it into a word document automatically,
I found a code online, which has worked a treat, However I'm wondering what lines of code I would need to:
1. Add Bullets or Numbers
2. Add a new line of text (I can add a new paragraph but I don't want a huge space between the two lines)
3. I have around 20 check box's is there a quicker way to check which are selected then write the text in word or do I have to write alot of If Checkbox1.Checked = True then, etc)
I'm looking at writing a application that interfaces with TAPI via the samsung open TSP. The problem I'm having is that after a few days research I am unable to find much info regarding coding for TAPI. There also appears to be alot of contradicting information out there too...
Has anyone got any pointers, examples or sources that I can start looking through??
Yes, I've googled. But I must defer to the experts as time to study Regex is not available.
[Code]...
Can these 3 lines be condensed into one line? If so, how? The purpose is to remove all spaces before and after all occurrences of & in a string.
How to find the seleted row index of datagridview
View 1 RepliesI am very new to VB.NET, I want to create a Forms Application to load a text file that has lets say 50 lines, some of the lines are identical and those are grouped together and some same format but different make up. Have it loads it into a text box in the form, to see - but I want another button to randomize all the lines and then show that in the box, and then have a Save button to overwrite the orginal.
[Code]...
i need to replace the whole word from a string.
for example. String= "Hi VBFriends, I am learning VB 2010."
i need to replace only VB as C#.
if i put String.Replace, its changing as "Hi C#Friends,I am learning C# 2010."
i used regex, Word boundary but not worked, below my code.
Dim sHTMLStream As String = "Hi VBFriends, I am learning VB 2010."
Dim oColl As MatchCollection = Regex.Matches("sHTMLStream", "\bvb", RegexOptions.IgnoreCase)
For Each sTemp As Match In oColl
MessageBox.Show(sTemp.Value)
Next
I wana ask you if you think that's the best and the fastest way to replace <<words>> into a .doc file? I don't know other way and i think mine is too slow for doing this kind of job.[code]
View 2 Replieswhere can i find a jpeg image with adaptive binary arithmetic coding?if you have a image of that, please sent it to me.
View 5 RepliesI am trying to create a function that searches each line of a richtextbox and returns that row if one of many search phrases are found.The app works wonderfully when used with longer words or muli word phrases as the search criteria.The problem I have is if the search word/ criteria contains a small string such as bae or sp then I get alot of false positives. Anytime bae or sp is found within any word it returns the results.I need the function to stop looking within the words for results and instead look at the word as a whole for a match.Below you can see that I am taking each line of text in the richtextbox, removing most non-alpha numberic characters and replacing them with spaces.Then I have it remove any double spaces with single spaces.For the search term list I have it take the text before the delimiter;and do the same.Trouble I am having is,if the search term is SP and the search phrase is "This is a space shuttle lauch"it will return the sentence since the sentence contains the word "space" which starts with sp.[code]
View 8 RepliesI am trying to replace an entire word in a string.
This is my example string:
"Hello test this is testing".
I want to replace the word "test" with "abc". I want the output to be:
"Hello abc this is testing".
Whenever I try and use the Replace() function I get:
"Hello abc this is abcing"
How I can do this with Replace or RegEx
I am trying to use this code to shorten words like Hello to Hi, and Whats up to sup in a rich text box.
If Value.Contains("Hello") Then
Value.Replace("Hello", "Hi")
End If
End Sub
I want to search a word document for a specefic text, like <image> and then replace this with a picture.
My code look like this:
objDoc.Content.Find.Execute(FindText:=
"<image>", ReplaceWith:=ThePicture, Replace:=Word.WdReplace.wdReplaceAll)