I am trying to write this loop to find the word start and then insert a word in a column until it sees stop and then go through all the data and do that.
[Code]...
I have document, with numerous pages, that will populate at key locations using a UserForm and bookmarks. One of the pages in the document may need to be repeated. In other words, one of the pages may need to be populated more than once (and inserted successively in the document).
The troublesome page has bookmarks that will need to be repopulated with different information for every new instance within that same document.
I am considering making a table with the verbage in the "Troublesome Document" located in a Table. When I need to repopulate a new instance of that page, I think I should:
1. populate the document
2. copy and paste the wording in a new page
3. insert the new page (without bookmarks yet maintaining formatting) before the "Trouble Document"
4. repeat steps 1-3 for every necessary instance
5. delete the "Trouble Document" with the Table
How can i forcefully insert a coloumn break in word document through VB.Net?
View 1 RepliesI have a table located in a Microsoft Word document. changes has been enabled in this document. I see that I can get the collection of revisions using "ActiveDocument.Range.Revisions" . I also see that I can tell if the revision exists inside a table using "Range.Information(wdWithInTable) " .My question is this:I really need to find out the "ID#'s" that contain a revision on the "SomeText#" column.So for example, if "Some Text 1" was revised, I need to output "ID-1".I am puzzled as to how to implement this logic. Does anyone know of a way to go about this?
View 2 Replies I have used Webbrowser control in editable mode.I am using IHTMLTxtRange for find a word and replacing it with other word.I have to find and replace internally in my code.Following is my code:-
Public Sub FindReplaceText(ByVal sfindText As String,
ByVal sReplacetext As String)
Try[code].....
It works fine for all find and replace except if the word contains vbnewline.E.g If in webbrowser control I enter 'Hii <vbnewline> Hello'The above two words contain Enter key(i.e vbnewline) between them.If I pass following string to my Method it doesn't recognize the whole word and doesn't replace the word. I have called my method as
FindReplaceAll("Hii"+vbnewline+"Hello","HiiiHelloReplaced", False, False)
Does IHTMLtxtRange support vbnewline in Findtext method?If not how can i do? All the above Find and repace need to be done in code and not by popping up the form for find and replace
I am trying to create a function that searches each line of a richtextbox and returns that row if one of many search phrases are found.The app works wonderfully when used with longer words or muli word phrases as the search criteria.The problem I have is if the search word/ criteria contains a small string such as bae or sp then I get alot of false positives. Anytime bae or sp is found within any word it returns the results.I need the function to stop looking within the words for results and instead look at the word as a whole for a match.Below you can see that I am taking each line of text in the richtextbox, removing most non-alpha numberic characters and replacing them with spaces.Then I have it remove any double spaces with single spaces.For the search term list I have it take the text before the delimiter;and do the same.Trouble I am having is,if the search term is SP and the search phrase is "This is a space shuttle lauch"it will return the sentence since the sentence contains the word "space" which starts with sp.[code]
View 8 RepliesI'm trying to write a function to find a word in a string in the this format : "ThisissometextthatIneedtofindandthisisthetext. This is another text."It's read as " This is some text that I need to find and this is the text. This is another text." but there is no space between each word. I want to get the word "text" or any word in that string. Can you help me with this function with a code sample ?
And I think that this method can be implemented with a string of Unicode also because in a sentence of Unicode it contains one or few, sometimes zero spaces between each word.
I've tried changing the RowStyle Wrap property and every Wrap property in the grid. How do I stop word wrap in a Gridview no matter what size the Row's Text Length is?
View 4 RepliesI decided it was about time I learned about accessing Microsoft Office products via VB.NET. I started with Excel and it all worked fine, I could create a new Excel Application, open a workbook from file and read from the sheet then close it all down again no worries. However, when I turned to Word...things got strange. Using the code provided below, every time I run it an instance of Microsoft Word opens itself on the desktop (with no loaded content). I didn't have this problem when using Excel with similar code, so I have to ask..what gives? Is there a way I can stop MS word opening at all? At the moment it just flickers for a second (it opens when I open the document, then when I call the Quit method it shuts down a split second later)[code]...
View 3 RepliesI have this little application that runs a SQL query works great, now I want to have a Start Button run the and display results then System.Threading.Thread.Sleep(300 * 1000) for 5 min then run again and display results and loop till I buttonstop_click. unsure if the sleep is the best method.
[Code]...
I am currently using the code below within a VB.Net application to find specific text in a Word document. The text is surrounded by symbols represented by the character codes in the .Text statement. The code below is working fine. The issue now is that sometimes the desired text within a document has been marked for deletion and appears as tracked change within the document. I would like to find only the desired text that has NOT been marked for deletion. Does anyone know of a way to determine if the found text is a deletion?
[Code]...
In my form I have Richtextbox control , button , textbox control . That Richtextbox contains a text and my code is :
Dim text As String = "videoplayback?"
Dim returnValue As Boolean = False
If text.Length > 0 Then
[code]....
Today i received my homework assignment for this week and i finished every question except one. The question is: "Write a Program that requests a word containing "r" and "n" as input and determines where the two letters appear first. Just wondering how i should approach this i need to use a loop somewhere but i am confused as to how or what sort of code i should use. I know there needs to be a index to find the letter i just don't know how to screen the word to look for r and n using a loop.
View 1 RepliesBasically in visual basic 6 I could access word tables in existing templates with the code owordactivedoc.tables(1).select() where owordactivedoc refers to the active word document and tables(1) refers to the first table in the template.Trying the same code in VB 2003 just leads to errors. Secondly how do I access bookmarks or alternatively word variables.Furthermore how do one deploy web.services. For example the current program I am building is for another computer. Simply copying the web service to Inetpubwwwroot dont work because it is not picked up by the Internet Information Services program. I have to create the web service in vb2003 on the other computer change msconfig manually. Copy and paste the existing service vb file in the created folder replacing the empty vb file.
View 3 RepliesWe have an interactive windows based application written in VB .Net 2010. It uses Word Object to display documents in MS Word. We have a form with a button. When the button is clicked we open the Word document and maximize the Word Windowstate. When we have the Visual Studio Tool running, the Word Document is maximized and has focus, even if we are running the exe from the bin folder outside of the tool. However, if Visual Studio is not running and we run the exe, focus remains on the original form window and the document stays in the task bar.
View 5 RepliesI have been trying to figure out how to read paragraph content which exists a heading. The heading itself is part of the table of contents. The heading will have a particular style (say Heading 1). For example: "Introduction" is a entry in Table of content with style Heading 1. I want to read content under heading "Introduction" but not any more content (i.e not content under sub headings of Introduction) I have been trying to do this using styles/style, TableofContent, Paragraphs/Paragraph,Range. Still cannot come up with a effective solution. I am working in VB.NET in VS 2010. I am using the word 2007 object model (office 2007 interop) as [URL]
View 1 RepliesI can search for the word Love in an .rtf file and return every occurance of the word into a RichTextBox. It returns the word and the scripture the word is in, but it also isreturning a bunch of weird text like: archan78988yykp etc etc. How do I onlyreturn the scripture with the searchedword, in this case the searched word is love. The code I am using is as follows:
<
If Line.Contains(Me.rtbSearch.Text) Then
'show search form
[code].....
I have a VB.net application that gets data off our server with ODBC and populates and saves a Word Document. When I try to deploy it to another computer it will get the data just fine and populate the first document, but it will crash before saving it. I've installed the .net framework 4.0, Microsoft Data Access Components, and the Microsoft ODBC .net data Provider. The error code is 0xC0000005, which is from what I can see is called an "Access Violation Exception." It works fine on my computer.
View 3 RepliesI need to start MS Word 2003 from Inside VB Windows Application and Load a specific Word Document.
View 4 RepliesIs there a simple way to insert a specific word between 2 or more words that of course have spaces?I'm doing if and next and if and next.I have 200 columns of programming for something that it may be simpler to make.So, p.e with the word "and", "Hello world" will be "Hello and world" or p.e. "Hello nice world" would be "Hello and nice and world".Words can also be like "Hello nice world"(doesn't show here,the spaces are "hello nice world" .I don't mind the spaces between to be only one but the words must be separated with the key word and space before and after.
View 6 RepliesI am doing a word document processing project. we have a template document. We would like to insert some texts or images into this word doc according to different application. currently, I am using bookmark to position userdefined texts and images. but I don't know how to make format for the texts and image,especially for image, I would like to position the image into the middle position, or some specific position.
View 5 RepliesHow can I automatically open a Microsoft Word Document (or powerpoint/onenote) and paste the contents of the clipboard? Perhaps openoffice or something too.
Basically so I just press a button on the form, and word opens and pastes the clipboard content.
I'm using VB to generate a word document When using the += operator to add additional text to a paragraph like
Para1.Range.Text =
myReaderRef("Referral_City").ToString() & ", "
Para1.Range.Text +=
myReaderRef("Referral_State").ToString()
[Code]...
I'm trying to read a word document for the purpose of obtaining a word count, I realise Word has built in functionality for presenting a word count but I want to write a little app that will omit certain parts of the document from the word count.
So far I have tried this code to open the document but I am getting an error 'Word.Document cannot be found' and 'Microsoft.Office.Interop cannot be found'. I have added a reference to the Microsoft Office 12.0 Object Library under the COM tab. I have Office 2007 installed and I'm using VB2005.
Imports Microsoft.Office.Interop
Dim appWord As New Microsoft.Office.Core.Application
Dim docWord As New Word.Document
docWord = appWord.Documents.Open("c: est.doc")
I have developed a WinForm Application with VB.Net (VS2010) having Office 2010 Professional Installed, and it is 64-bit Windows 7 Platform. The program opens a .doc and .rtf format document, and attempts to save it in htm format. I am using following commands:
Dim sFilePath as String = "C:ABCfile.doc"
Dim oApp As New Microsoft.Office.Interop.Word.Application
Dim oDoc As New Microsoft.Office.Interop.Word.Document
[code]....
All goes fine with development and running on development PC, but when I publish it for offline installation, and deploy it on Client PC having Windows XP with Office 2007, it gives error on oDoc.SaveAs2 line, and program crashes.
VS 2008 08/10 counting vowels in each word,longest/shortest word?
View 8 RepliesThe following code allows words to be added to a listbox. Add the word to a text file and create a folder with the word as its name. The second part undoes the actions.If I try to delete the word immediately after adding it one of two things happen.
1.An error is reported stating the path cannot be found. Although the listbox index value is correct according to the code the error is pointing at that index +1.
2.The code continues to the point of requesting conformation to delete the folder, still pointing at the index value +1. I the action is confirmed the wrong folder is deleted.
However if I stop debugging, then run the code again all works correctly.Is it likely to persist when the application is compiled?
Imports System.IO
Public Class Form1
Dim pathlist As String = "M:Visual Studio 2008ProjectsEnvironment and Conservation GlossaryEnvironment and Conservation GlossaryGlossary List.txt"
[code]....
I want to know how to put (-) AFTER the word LOVE AND before Any word in the textbox by a click of Button. ( if my textbox1.text has: LOVEMOM then when i click the "Button" it shows "LOVE-MOM" if LOVEDAD then = "LOVE-DAD" and soo on.
View 5 Repliesis there a way to get the raw data of a word file document object?
word = new Word.Application();doc = new Word.Document();
now, I open the word file, do some replace. save the file. I could open the file as raw binary file. but I'm thinking maybe there is a property that can get the raw the data? which property?
I am not sure if this is the best place to post this comment, but here goes. I am setting up a document in MS Word 2007 and would like to have a checkbox at the bottom of a certain page that is enabled when true to insert a page break, copy the page above and then insert the copied page into the new page that has just been created.I have got the checkbox in from the developer tab, opened up the Microsoft Visual Basiceditor and got it to insert a page breakhen it is selected (checked)iving the new page.
View 2 Replies