Alright, so in yesterday's thread, I asked for the codes to copy the contents of a directory to a separate directory. The code:
My.Computer.FileSystem.CopyDirectory( , , )
worked fine.However, I have decided that I wish to add a progress bar into the mix so that the user can see the progress of the transfer copy. So far:
I am wanting the most efficient way to copy a file with a progress bar updating the copy percentage.
This is the standard copy code I am using:
System.IO.File.Copy(source,target)
This is very fast and efficient. However, I cannot report the copy percentage.
I have tried many functions that read and save a file by opening up the filestream and then looping while reading/writing the data. This enables me to report the progress.
Here are the functions that I am using:
Public Sub SaveBinaryFile(strFilename As String, bytesToWrite() As Byte)
Dim position As Integer = 0
Dim BufferSize As Integer = 4096
[Code]....
i have this code to copy a file from one location to another but i am wanting to add a progress bar to show the % of the files copied, after doing alot of reasearch on the interent i carnt find any examples out there which does what i want it seems the way i am copying the file it would only increse the progress after its finished copying each file insted of increaseing the % of the bar per say 1kb this is my file copying
[Code]...
Here's my
[Code]...
During the file copy, Label2 isn't being updated. In fact, my whole form goes non-responsive. How can I fix this?
I have created a simple Backgroundworker process to copy a large file (30GB). Is there any way to report the progress of that file copy?
I'm using System.IO.File.Copy to perform the copy. I've seen a few posts/blogs that suggest comparing the bytes copied with the size of the source file but that seems like a huge overhead in this case.
i am trying to figure out how to copy a file in the background and monitor its progress.
in VB6 i used the FileCopyEX API
so i wrote a quick application in VB6 that used the API, then opened it in VB2008, so it ran the upgrade wizard
i get one error message after the wizard runs
'UPGRADE_ISSUE: Declaring a parameter 'As Any' is not supported. Click for more: 'ms-help://MS.VSCC.v90/dv_commoner/local/redirect.htm?keyword="FAE78A8D-8978-4FD4-8208-5B7324A8F795"'
Public Declare Function CopyFileEx Lib "kernel32.dll" Alias "CopyFileExA"(ByVal lpExistingFileName As String, ByVal lpNewFileName As String, ByVal lpProgressRoutine As Integer, ByRef lpData As Any, ByRef pbCancel As Integer, ByVal dwCopyFlags As Integer) As Integer
I have a function that I use to copy files from one location to another.I want to incorporate a status bar to illustrate the progress of copy.I am assuming that I need to put additional logic after my File.Copy stmt below. [code]
View 9 RepliesI have a function that I use to copy files from one location to another. I want to incorporate a status bar to illustrate the progress of copy. I am assuming that I need to put additional logic after my File.Copy stmt below.
Public Sub CopyFiles(ByVal sourcePath As String, ByVal DestinationPath As String, ByVal fName As String)
If (Directory.Exists(sourcePath)) Then
[code]......
I am wanting the most efficient way to copy a file with a progress bar updating the copy percentage.
This is the standard copy code I am using:
System.IO.File.Copy(source,target)
This is very fast and efficient. However, I cannot report the copy percentage.I have tried many functions that read and save a file by opening up the filestream and then looping while reading/writing the data. This enables me to report the progress.[code]...
What is the best/efficient way to copy a file showing the copy progress?
I copied the code here and translate the code to vb [URL]it is working fine but there is one small problem but I cannot solve? Here is my code: SyncClientVB Another Source The scenario is... the progress is reported by an event (OnCopyingFile event)
Public Sub OnCopyingFile(ByVal sender As Object, ByVal e As CopyingFileEventArgs)
If pbFileTransfer.Value <> e.PercentCopied Then
If txtCurrentFile.Text <> e.FilePath Then
txtCurrentFile.Text = e.FilePath
[code]....
The problem is that it is ok when runned but when I click the form it starts to hang but in the console... it is still continuing.
dp.SyntaxHighlighter.ClipboardSwf = '/dp.SyntaxHighlighter/Scripts/clipboard.swf'
dp.SyntaxHighlighter.HighlightAll('6f5d1b01659646618ff3bdca29fb1b7f')
Looked through many tuts, can't find one.
View 1 RepliesSo as it says in title i need to copy several files from one folder to another. But i dont need to copy folder with files. i need to copy several files to another folder..
And show progress in progressbar.. is there a way how to do it, cos i found only how to copy 1 file showing progress..
I have a program that uses IO.File.Copy to copy files from point a to point b. Its slow, which is fine because there rather large files. I was wondering if there is way to get an estimate time to copy a particular file(s).
Example: File a will take 1 hour to copy, File B will take 30 minutes to copy. Estimate Total Time: 1 hour 30 minutes.
I am trying to create a log file which I am going to use to populate some controls (DataGridView or Treeview). I am trying to figure out if should use text files or XML files to do so. Effectively the log will highlight multiple phases in a client-side app. The log will be written to at various phases when the project is running. The user will always have the options move on to the next phase or save progress and exit the project. As such, I want the log file to highlight how far the user has progressed throught the various phases AND I want the log to highlight varous information from each phase. Whenever the user starts the project, they will be given the option to load existing log files. So the project will have to read these log files and append them where necessary as the user progresses.
I am not sure what the best way to do this is and below is a rudimentary approach using text files. As you can see, the top of the file would have a summary of all the phases and whether or not the user completed each phase. Next each phase would have a data section highlighting what data was stored along the way. I have used a ":" to denote each section. Then within each section I would obviously need to use a delimeter for all my data. So if Phase1 = True, then I would load all the pertinent data from "Phase1:" into the desired control. Can anyone provide an efficient way of doing this and provide some insight as to whether I should use XML instead. The phases my change during development and I am not sure yet which controls I will be using. Does XML provide more flexibility.
In summary I am looking to create, read/write and append log files and populate controls with the data in varous sections of the log file. Example:
Phase1 = True
Phase2 = True
Phase3 = False
Phase4 = False
[code]....
Title explains it what VB code could i use to have windows copy a folder and display windows progress bar?
View 1 RepliesI have a weird behavior when trying to copy a file with System.IO.File.Copy. The file never gets copied. More than that, the call doesn't generate an exeption!
I am using VB.NET, Framework 3.5. I'm trying to copy in C:Temp and I do have the privileges. Or at least I used to...
How can i make a button that download a file using http show a progress bar about the downloading file state?
View 10 Repliescode snippet that would allow a progress bar to track the input of a text file? Normally I would not bother with this, but the text files are > 10,000 lines long, which is noticable even on a fast machine. The number of lines is variable, so I would assume that one would not use a fixed value to calculate when the progress bar goes 100%.
View 4 Replieswell i'm currently making a downloader for miniclip games to play them offline. i could make the code to get the download link and i could download them getting the code to get the link took some time to collect . i could find through google how to download that link
My.Computer.Network.DownloadFile(TextBox2.Text, SaveFileDialog1.FileName)everything works fine and the file is downloaded successfully, what i need to know now is how to get file size, or how much is downloaded from the file, download speed and show the download on a progressbar
im making a web browser which is intertwind in a project, but i cant get the progress bar to display the current percent of a page that is loaded, i want to have 10 segments, each standing for 10% of the total page loaded. So say a page is loaded 67%, 6 out of 10 of the segments will be shown.
View 3 RepliesI am trying to implement a BGW and want to report progress to a progress bar for my TextFieldParser program, sometimes if your opening very large files it takes a while and I would like the user to be able to see the progress and have some interaction so they know the program is still running I am a little hung up on what to in the reportprogress
I have:
worker.ReportProgress(0, myReader.ReadFields())
and its not doing anything, I didnt expect it too since ReadFields is an array
parser
Private Sub BackgroundWorker1_DoWork(ByVal sender As Object, ByVal e As System.ComponentModel.DoWorkEventArgs) Handles BackgroundWorker1.DoWork
Dim worker As System.ComponentModel.BackgroundWorker = DirectCast(sender, System.ComponentModel.BackgroundWorker)
[code]....
get the progress bar show the progress of the batchfile running in the background?
View 10 RepliesI have two forms, when the user selects a button, the second form opens and an external executable begins an automated process. The point of the second form, is to only show the current progress of the automated tasks and closes when those tasks are completed.How would I use a progress bar to show the current progress of an action on a different form without knowing how long it will take?
View 9 RepliesfrmMain - Allows user to pick process or combination of processes they want to run frmProcess - Shows progress of their selection I have three modules. Each runs a specific process. The frmMain allows the user to run any one of the three modules individually or all together in a single process (basically, runs the one after the other until done).
[Code]...
I'm trying out uploading of files from local computer to a server and I'm using these few lines of code:
My.Computer.Network.UploadFile("C:Temp est.mp3", "192.168.1.2 est", "", "", True, 500)
This does exactly that and the "True" in the above string shows a progressbar in its own window. I would like for that progressbar to display on the same form as the rest of controls are. And not in it's own window. Is there a way of doing just that?
[code]...
How come I don't get a "Done!" when it's finished downloading the file? (The file is only ~100kb.)
[Code] How i think that this should work: 1. Getting the size of the file that we want to download and updating the progressbar max value to that 2. Downloading the file and updating the progress-bar based on how much data its downloaded.
View 6 RepliesI have this code to download a file from a ftp server. It works fine, well I guess semi fine ..lol.. files larger than 10 mb are the problem. Files starts downloading and when it reaches 85 % i get an error Arithmetic operation resulted
[Code]...
Is there any way in Visual Basic 2010 that I can download a file to a specific location, with a progress bar showing how much of the file has downloaded.
View 6 RepliesI use this method (My.Computer.Network.UploadFile) to upload files by FTP. But I want to upload file with using ProgressBar control not using its progress bar.
View 10 Replies