File I/O And Registry :: Reading TAB Delimited File Using MS Text Driver
Jun 14, 2011
I am trying to import a TAB (NOt comma) delimited text file into a DataGridView. The following code works fine if I have a comma separated file. All I have to do is change the FMT to "Delimited".It just does not work with FMT=TabDelimited. All columns are read into single datatable column. The text file is ANSI text and I have double checked to make sure Tabs are tabs and not spaces, even exported a sample Tab Delimited file from Excel.Can this even be done using Text Driver? [code]
I have just recently been using VB 2010 after using VB5. I have noticed a lot of changes. The problem I have is that I wish to open and save text files to and from arrays in the background. I've attached what I would do in VB5. I have searched around, but all the examples I find use a Textbox instead of an array. Can anyone show me how I can do this with VB 2010?
i created a text file with some employee data in vb 2005, on my form i i have a bunch of textboxes and a combobox. i can load the employee numbers manually into the combobox but want the employee details to show in the textboxes when selecting the different employee numbers. i declared a structure with the various fields and a reader to read the text file. here is where i am stuck. my code thus far: Public ABCStreamReader As StreamReader
An application that my company uses stores report files with a .dat extension for use with their software. These files can be opened in notepad and the basic report information can be seen as text. I am attempting to write an app that opens and reads data from these .dat files and displays it in a checked listbox. My hangup thus far is that I can't figure out how to read the data from the .dat files since they are not .txt files. Can anyone point me in the right direction?
I'm currently making a program that will be used to practice German. It reads from textfiles that have English words (noted by # prefix) and German words (noted by $ prefix). An example of this:
#hello $hallo #good $gut #evening $abends
The way it currently works is it loads a text file, finds all # and splits to an array called "English" and finds all $ and splits it to an array called "German" What I want it to now do is feed the "English" entries into textboxes on the left, and "German" onto textboxes on the right so I can then match them out and make a sort of memory game out of it. Unfortunately, I don't know how I would loop an array through multiple textboxes. Conveniently, the textboxes on the left have even numbers, and the ones on the right have odd. Is there a way to possibly find all evenly numbered textboxes and loop "English" array entries into them, and the same for "German"? I've realised this has now gotten a little convoluted, but hopefully somebody understands. I can screenshot the form for better explanation, and copy my existing source code if anybody wants it.
I need to write data to a file, preferably in binary format, but I am unaccustomed with the concept. Where's the easiest place to get the basics? I could come here with a specific need, but I'm at the point right now where I am more willing to work within the confines of keeping it simple.
Here's what I know: 1. how to open a new file 2. how to specify the record length 3. how to close the file
Some specific questions:
Does the record length have to be constant throughout the file?
Can I read the nth record without reading the whole file?
I am working with a database that is used for managing program requirements ie text fields of varying lengths. The database program is capable of exporting data out in the form of tab and comma delimited files. I would like to see an example in vb.net 2003 of how I might be able to loop thru an entire delimited text file line by line isolating each tab delimited field to say a text box or a string variable.My ultimate goal is to be able to write this delimited data to a special spreadsheet application capable of dealing with text block sizes beyond the capability of Excel. So now I am interested in how to manipulate huge delimited text files in vb.net 03.
i want to take a comma delimited text file and then select all unique records based on one of the fields in the text file. should i read the text file into a data table or just use a data reader?
I'm attempting to read from a comma delimited file, the values are put into a structure (employeerecords) i want to know how i can access the separate sections of this structure i will provide my code so far, i apologize for the comments I'm making sure i know whats going on, I'm new to this, the code currently just dumps the whole file into a textbox, i would like to be able to access and manipulate the individual fields but i am at a genuine loss.[code]
So I've been using VS2010 and haven't had too many problems transitioning over but I have an issue at the moment and I can't seem to find the answer...I have been using a little piece of code to insert comma delimited files to a database, which works great.Today, I received a Tab Delimited file from a client....obv I could edit, replace tabs with commas and move on but I want to know the right way to do this so I feel accomplished I've tried two ways so far1. This is the code I use for comma delimited with a slight change for the tabs -- PF refers to a class module that has the functions I use to get files and parse file paths
Dim Conn as New ADODB.RecordSet PF.InputFile = PF.GetFile("Select LMR Demo File", "") conn.Execute("SELECT * INTO [tmp_lmr] FROM [Text;Database=" & PF.InitLoc &
So i'm new to working with vba in access and i'm having trouble getting this code to work. What it is suppose to do is take a selected text file and read the original file into a list box. Then there is a second button that when pressed will convert the text file from a pipe delimited file into a tab delimited file and then show the changed file into a new listbox.
Option Compare Database Option Explicit Function GetFilenameFromPath(ByVal strPath As String) As String
I want to read a tab delimited file so i set up a data reader with the following connection string: [Code] However when I do this it doesn't seem to delimiter at the tab characters (I cannot work out why it is breaking up the data where it is). the first few lines of the csv are in the attached "dbamstr.txt" - the select statement I am running is: "SELECT * FROM dbamstr.txt".
i have a stream reader reading a csv comma delimited file, its skipping every second line though if i edit the file and enter blank lines in between, it reads them correctly
I am writing an application that connects to a specific com port. This com port can change depending on how many physical ports are on the PC, and if other USB devices have installed com ports before this one.
I have the communication to the com port all working great, but I need to get the com port description not just the "COM#" which is all I currently get.
I found in the registry where the description is stored but am having trouble doing what I need.
there is a varied number of sub keys. The are numbered 0000-NNNN depending on how many ports you have. Inside each of these keys, there are multiple values, although I am only interested in one or 2 of them.
My problem is, that I do not know how to get a list of the subkeys (the 0000-NNNN keys/folders) from the original key I posted. I have looked through a few registry tutorials, and I can view the default value in the listed key, but I could not find how to list the subkeys of the listed key.
Does anyone have any sample code they could share that shows how I can get a listing of subkeys, and then run through those subkeys checking for a specific value in one of the strings contained in the subkey?
friend of mine has no HTML knowledge so I'm attempting to write a program that replaces certain parts of a html file to suit his needs.I've edited the HTML file and marked certain parts with "tags" like this:
#IMAGEURL1# I have a textbox where he can copy + paste an image URL and hopefully the #IMAGEURL1# is replaced with the contents of the textbox.
So can someone please enlighten me to-as how to open a HTML file (there's no textbox to display the contents just yet, I'll add one if needed), find the specified text and then replace it with whats in a textbox.
I want to load a csv file (A comma delimited text file) into a datatable. I found the OdbcDataAdapter Class which looks perfect, but it says it is supported only in version 1.1 of the .NET Framework.
Is there a better way to import a csv file into a datatable? the first line has the column headers.
I am using Visual Studio 2008, using version 3.5 of the .NET framework
I'm new to Visual Basic. I'm trying to get this code to read a .txt file line by line. If the only thing that the line says is "B" it should add one to the intTotalBoys integer and so on with G for Girls, F for Fathers, and M for Mothers. I'm not sure why it won't work. [code]
So I need to write out an object to a text file as well as read in objects from text files.How do I accomplish this? This is the code i've used to read and write just simple lines of text. Is there a small modification to this or just a different function i use to read in an entire object?
I've got a problem in Importing Text delimited File to access Db , I always get an error "No value given for one or more required parameters' while execution [Select Into] Statement
[LEFT] Dim svdialog As New SaveFileDialog svdialog.Filter = "Access Database Files (*.mdb)|*.mdb"
I am in the process (slow process) if learning vb.net by trying to create a simple application that will read and write (save) chosen information to a text file. The application has text boxes (name, email address, etc) and I want to read information from certain lines in the text and place in the given text box.
Code: Dim StreamToDisplay As StreamReader StreamToDisplay = New StreamReader("C: esting estfile.txt") TextBox1.Text = StreamToDisplay.ReadLine() StreamToDisplay.Close()
Currently it's reading the first line of text (which is "[username]"). Text file (testfile.txt) is attached
I have read a log file which is being used by a process. I could open the file in notepad or similar applications. The log file is not written by my application.
File.Open or streamreader gives me the following error: "An unhandled exception of type 'System.IO. IOException' occurred in mscorlib.dll. Additional information: The process cannot access the file "E:parkvbproject1.NETinsystem_log" because it is being used by another process."
I'm currently working on an app that grabs listings from a craigslist search (by saving the RSS feed from the results page as an XML file, and then reading it). However, I'm hitting an error.I have the code below in my Form1_Load event:
Code: My.Computer.Network.DownloadFile("http://greenville.craigslist.org/search/sss?query=ipod%20touch&format=rss", "C:UsersBillDocumentsCLtemp.xml") Dim CLsr As New System.IO.StreamReader("C:UsersBillDocumentsCLtemp.xml") Dim CLxr As New System.Xml.XmlTextReader(CLsr)
[code].....
Basically I'm grabbing the RSS feed from the web [URL] currently just a test search for iPod touch being sold in Greenville, SC) and saving it as an XML file to the HDD temporarily to be read with a stream reader. Then, it just displays message boxes one after another showing the title of each post. However, when I run the program, I get the error on this line:
Code: Dim posts As System.Xml.XmlNodeList = CLdataDoc.SelectNodes("rdf:RDF/item")
"Namespace Manager or XsltContext needed. This query has a prefix, variable, or user-defined function."
I am writing a program to calculate Pi to several hundred billion decimal places and this will require lots of GB of memory. I wrote a test program in VB2008 that saved the first 16 digits of Pi (without the decimal point) to both a text file and a random access file, just to be sure it was outputting the numbers properly. For reference the first 16 digits of Pi are:
So I'm in the final stages of finishing a program I've been working on for nearly a year now, and this is basically my final hurdle. The Save dialogue is working beautifully, with 'flags' in order to switch it over from the regular input into text boxes to the Listbox input protocol.
However, I'm having a *** of a time getting it to take lines from the text file and put them in the proper text box. Here is an example file:
Quote:
SHOWNAME CALLNAME BREED
[Code]....
So with the sample file I provided above, in the textbox named callNameText would appear "SHOWNAME", and so on and so forth. With this build, I get a NullReferenceException on the "Me.Controls(strboxNames(i)).Text() = strAllText(ati)" line.
