I am using VB.net 2005 and I have a timer running on form1 that communicates modbus with a relay io board. There should be constant uninterrupted communication between the two devices and that is working until I open the data logging form2 and import data from a large sequential text file. While I am parsing data, the timer from form1 stops communicating with the modbus device. Once the data is done, the timer of form1 resumes communication with the modbus device. Is there some other method I could use to make sure the modbus communication is never interrupted.? Is there a command I can periodically run from form2 while the data is being parsed that will keep the timer on form1running?
Error is coming Registry Access is not allowed.While Opening a Key.
Code: Private Sub Button3_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button3.Click NewDelete("HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionRun", "Sonia") End Sub
Ok what i want to do is have a user specify a directory when this for is opened and have it remembered everytime this for is open,Also i have a few buttons and whenever the user clicks on one of the buttonsa i want it to open a txt file delete everything in it and write a value that i specify
So I'm in the final stages of finishing a program I've been working on for nearly a year now, and this is basically my final hurdle. The Save dialogue is working beautifully, with 'flags' in order to switch it over from the regular input into text boxes to the Listbox input protocol.
However, I'm having a *** of a time getting it to take lines from the text file and put them in the proper text box. Here is an example file:
Quote:
SHOWNAME CALLNAME BREED
[Code]....
So with the sample file I provided above, in the textbox named callNameText would appear "SHOWNAME", and so on and so forth. With this build, I get a NullReferenceException on the "Me.Controls(strboxNames(i)).Text() = strAllText(ati)" line.
I need to write data to a file, preferably in binary format, but I am unaccustomed with the concept. Where's the easiest place to get the basics? I could come here with a specific need, but I'm at the point right now where I am more willing to work within the confines of keeping it simple.
Here's what I know: 1. how to open a new file 2. how to specify the record length 3. how to close the file
Some specific questions:
Does the record length have to be constant throughout the file?
Can I read the nth record without reading the whole file?
I am working on a VB Console Application that takes an Autocad drawing type DWG and converts it to a PDF using a shell command that calls a third party application. In this case, acmecadconverter.exe from www.dwgtool.com. Then the PDF that is created needs a unique watermark, so I call a second application for that called pdftk.exe from www.accesspdf.com/pdftk/.
Everything works as intended, except when I try file names that contain spaces. The file system object does not tolerate spaces in the drawing file name. For instance, the following command gives me a system.io.filenotfoundexception...
I'm currently developing an editor for an AFL management sim.I want to be able to load three or four multidimensional arrays to the program, then save them to the same file. I tried the tutorial on here but got completely muddled up. Why can't it be easy like in VB6 When it was like 10 lines of code tops!
I am writing a program to calculate Pi to several hundred billion decimal places and this will require lots of GB of memory. I wrote a test program in VB2008 that saved the first 16 digits of Pi (without the decimal point) to both a text file and a random access file, just to be sure it was outputting the numbers properly. For reference the first 16 digits of Pi are:
Our program will start with the help of a FileSystemWatcher object. How can we check or the file is total copied, for example the file is 100 Mbyte it take a time it's ready for use. Idea:
Do While True Try N = testForUse(BigFile) If N = 1 Then Exit Do
I have a program that can save user's input into a text file and load it back, but whenever I try to open the file and exit without selecting the file I get an error.(if i select the file and open it i don't get any errors).
This is the code that handles text file loading: Private Sub Button4_Click(sender As System.Object, e As System.EventArgs) Handles Button4.Click OpenFileDialog1.InitialDirectory = "C:" OpenFileDialog1.Filter = "Text Files ONLY (*.txt) | *.txt" OpenFileDialog1.ShowDialog()
[CODE]...
The error is :"FileNotFoundException was unhandled. Could not find file at xxx". also I would like to know how to make it so that the initial file name for file saving is today's date. I do not get any errors when I try to save the file.
I need to open an excel file from vb.net and then search it for specific data. I then need to take those data and insert them into text boxes on a form that i have created. This is all controlled by a button click. I already have some code that will open a file dialog box and let me navigate to the correct file, but I am having trouble with the search portion. I have tried the Find function but I am not sure of the proper syntax. I am using Visual Studio 2008 and Excel 2003.
I'm having a slight problem getting my program to load a save file when double clicking the save file.I'm using the Command$() to get the command line argument. I can open a save file by dragging it onto the exe. But not by double clicking the save file (after it's associated with the exe).I though dragging and dropping a file on a program and double clicking the file would open it in the same way, but I guess not.So in short how does file association work and how do I get the file path set to a var when the program loads.
I've had a bit of a look around the net and on the forums but I've yet to find an answer to my question. I've got Visual Basic 2008 Express and I'm trying to write some registry entries, I can write strings fine just using
I got a log file (Log.txt) a timer and a RichTextBox1.Text The timer is opening the log file again and again every milisecond here the code:
Code:
Okay that keeps the track of my log file inside my richtextbox , but there is a big problem there. My richtextbox slows down hard if the log file gets too big.. Sometimes it kicks me out of the program and in taskbar it says Program Not Responding..
I wanted to know if there is a method to read a bigger Log file with out having such issues. (It mostly happens when log file goes over 13000 characters)
I've gone through about 16 hours and two packs of cigarettes trying to figure this out. First a little background. I was using 6.0 up until 2004 when I went to prison. I'm out now, and trying to relearn the trade, using VS 2005. I'm currently porting some 6.0 code from another project, SpyCast Webcam Studio, into VB 8.0. It's disheartening, to say the least. None of the old built-in subs/functions work anymore, so I have to scour the forums to relearn each and every function.The section I'm doing now takes a snapshot from the webcam (Video API --> PictureBox --> Save as Jpeg), then upens the file to upload it to the server via HTTP POST. I've been using this code in SpyCast for years with no trouble, but I spent many hours trying to piece together the right code to open the binary file to read its contents. I pieced together two methods I found around the forums, one using FileStream() though the code I found wasn't for binary files, even though it said it was, so that code doesn't really work. Method two uses Microsoft.VisualBasic.FileOpen() and works better.
Here's the kicker. By the time I run through the rest of the rigamarole of uploading the file, by the time I read it on the webserver, it's *slightly* corrupted. It's a valid Jpeg, no errors, but the picture looks like when I use to watch the Playboy Channel when I was a kid scrambled with weird colors and whatnot. [code] Each "chunk" is basically one "line" of the file. It looks like a single LineInput() return is the text between two carriage returns. Am I correct? I tested this with a flat text file, and it looks true. However, That one input line returns the text or data with the carriage returns *stripped*! ***?!? =( Fine, I have no problem adding my own vbCrLf to each LineInput(), if I were opening text. but this's binary. A character could be Chr(10) or Chr(13), both of which are removed from the original file contents.So I could very well need to use something other than LineInput(), but I haven't found any other examples on the web using this method.
trying to find a decent answer for my question; I do have a utf8 file which I (down)load, manipulate and wanting to save back again.The result always is that the file I produce is not in utf8 format;
Dim fs2 As New FileStream("c: est.dat", FileMode.Create, FileAccess.Write, FileShare.None) Dim w As New BinaryWriter(fs2, Encoding.UTF8)
i am working on an application called logonscreenchangerxp i made my program and when i run it on xp virtualmachine i get errors the program is made using vb 2008 and using .net framework 2.0 i am not able to get full permissions to modify boot.ini file and a regisrty value and to delete a file
Currently, I am try to get the email addresses that have been saved or stored by the user of the computer. This isn't the emails that the user has sent or received, or the contacts he/she has in his address book. Just simply the email accounts that have been accessed from the computer.I know that there are some locations stored in the registry that have the email account. The email addresses that are used on the current computer. I just can't seem to find them on my computer.I am not sure if the registry is the only place to find it or if it stored on the web browser such as internet explorer or google chrome.
I am writing an application that connects to a specific com port. This com port can change depending on how many physical ports are on the PC, and if other USB devices have installed com ports before this one.
I have the communication to the com port all working great, but I need to get the com port description not just the "COM#" which is all I currently get.
I found in the registry where the description is stored but am having trouble doing what I need.
there is a varied number of sub keys. The are numbered 0000-NNNN depending on how many ports you have. Inside each of these keys, there are multiple values, although I am only interested in one or 2 of them.
My problem is, that I do not know how to get a list of the subkeys (the 0000-NNNN keys/folders) from the original key I posted. I have looked through a few registry tutorials, and I can view the default value in the listed key, but I could not find how to list the subkeys of the listed key.
Does anyone have any sample code they could share that shows how I can get a listing of subkeys, and then run through those subkeys checking for a specific value in one of the strings contained in the subkey?
I am writing a backup program that zips files. Using some sample code I have the following that creates a zip file. Problem is it does not get any subdirectories or files. Where am i going wrong?
Dim azFileNames() As String = Directory.GetFiles(SourceFolder) Dim objCrc32 As New Crc32() Dim zipStream As ZipOutputStream
[CODE]...
Alternativley, there is another component to the zipping dll that I could probably bypass the above altogether. It is: FZ.CreateZip(DestFile, SourceFolder, True, "", "") Where DestFile is (Output stream as system.io.stream). I'm trying to read all the files, directories, sub dir and files, etc from a specific location, let's say 'My Documents' into Destfile in which the FZ.CreateZip zips the file. FZ is FastZip which is from icsharpcode.net. They have c# examples, but that's greek to me. I'm trying to just learn VB!
I've got an app which uses a background worker to copy files. It works fine but some files are quite large and it "appears" as though the app isn't doing anything. Is there an alternative to the File.Copy method of copying files so I can report on the progress of individual file copies, like the percentage complete?
I need to implement a routine to read a plain text file, BUT that file has a predefined format.The file format is as follows:
Quote:
<FILE_PROPERTIES> 'The "< >" also appears Propertie1="String" 'It's possible to have spaces after or before the "=" Propertie2="String" Propertie3="String" PropertieN="String"
[code]....
Is there any Windows API Routine to read something like that?Or could you point me an URL where something is implemented?I don't want a procedure to read the file line by line and comparing them with Line Input because blank spaces, empty lines and comments starting with " // " may appear too, and I don't want to take them into account, but also I need to save changes to the file, but only to the modified section, without having to read the whole file, and re-write it completely.
Binary access can't work, because I don't know what's the size of each "section", since the number of elements into it can change. I need something like the "ReadINI" Windows API Procedure, but allowing me to read the "[XXX]" sections headers, and also the "<XXX>" file title header.
Before I begin I would like to mention that I am not a noob in VB, it's just I've never had to do anything this complex before. Basically what I want is to have a program that you can load a txt file in, have it copy key words, and paste it in a textbox so I can use it later on. So in this text file, there is a bunch of info, but I am only needing a certain part. Here is an example of a text file (actually a .dat file, but is easily read):
My application runs on a "server" machine and provides files (10megs - 100megs each) to 8 other computers. Currently this is done using a standard shared folder on all 8 computers and the server simply copies the file to \ComputerNameSharedFolder - and everything is great.However, due to new policies we need to remove all shared folders, so using a simple \ComputerNameSharedFolder is no longer feasible. Therefore I need to find a way for my application to be able to share these files in a safe, secure, and compliant way.There has been talk of using sFTP which would require each system to have an sFTP server running at all times (controlled by the application somehow), or also SSL was talked about as it can be integrated into the application easily, etc...
how to save information into a text file from runtime VB2005. However, I wish to be able to write the information into any kind of form of file that cannot be simply opened and read by anyone (such as text file can be). Is there anyway that VB2005 can do this?
I'm using the SaveFileDialog to save listbox info into a text file. The files save fine, but when you go to save the file, if you hit the cancel button, it will overwrite the previous file you saved, because it's name was the same and it seems to save the previous file as the new name for your next file. Is there any way to catch if the user clicks cancel, and then exiting the sub if they did?
