Filtering The Data Displayed From A Datasource Based On Criteria?
Jun 28, 2010
I have a question about binding the datasource (MS Access database) to a listbox in a VB form. I have created a listbox and in the datasources explorer I have my datasource say SampleDS. I have several columns inside my datasource, say name, age, address in it. If I select name and drag to the listobx in the form, only the entries in the name column will be displayed in the listbox.
I want to know how to filter the name based on criteria. For example, how do I display names whose age >25?
View 1 Replies
ADVERTISEMENT
Jan 23, 2012
Well I have a list of things I want to search based on multiple points of data...for example Resolution, 3D capable, touchscreen capable....etc....What is the best way for display someone can think of & filtering results by capability, I have none of it typed out, etc...like list of objects & capabilities, etc... alreat...so it can be made any way that is thought to be good(with speed as well) for many different listings...say 1,000 of them & it filters pretty much instantly....reading capabilities & such & the list itself is easy but how can I make a filter(unchecking something brings back things, checking something takes away only since well your adding capabilities to filter selection....I have pictures that can go with items too as well as a name & more information could be given directly with the method or clicking on the picture/item.
View 13 Replies
Jun 7, 2012
On my view there is a datatable holding a collection of ServerRow and 4 textboxes (Hostname, OS, Location, Zone). When the user types into any of the 4 boxes I want to immediately filter this list. I have this code setup and ready to go that on the set method of each textbox property I call the filter method.
Now onto the problem: if I have 4 criteria that means I have 2 to the power of 4 different scenarios. What I would like to do is write a linq statement with all of these scenarios dealt with such that if any of the properties are NullOrEmpty they will not be used in the Where clause and on the flip side if there is a value the corresponding field will be searched with a Contains.
Example
AvailableCis = New ObservableCollection(Of ServerRow)
(_CiData.Where(Function(ci) ci.OS.ToUpper
.Equals(_selectedOS.ToUpper) AndAlso
ci.HostName.ToUpper.Contains(_ciNameFilterText.ToUpper))
.OrderBy(Function(a) a.CiName))
This example shows how it works with 2 criteria and both of those criteria are set.
View 1 Replies
Mar 26, 2009
I am trying to find a way to use a month calendar control as an object data source, such that when end user selects a given date, or a date range (1 week max), it will supply the date range criteria for an access query, and the results will wind up displaying in a data grid view below the month calendar. I am having a really hard time..
how to write the date criteria into the access query for something like this
View 5 Replies
Jul 20, 2011
Here is what I need to do: I need to be able to go through the cells in my first column and find any that have four digits (and only four digits). When a cell is found with a four digit number I need to be able to bold that entire row. How can I do this?
I'm in VS2007. This is a datagridview program. Data populates the tables from a database. The cells in the first column that contain the data can contain between four and 8 numeric digits. I only want to bold the rows that have cells in the first column that have four digits.
View 14 Replies
Jul 23, 2009
I want to be able to call a certain stored procedure based upon different criteria. May I do something like on lines 6 through 12 ? If so, am I properly creating my command object on line 3?
1 Dim connString As String = ConfigurationManager.ConnectionStrings("EMRConnectionString").ConnectionString
2 Dim conn As New SqlConnection(connString)
3 Dim sprocComm As New SqlCommand
[Code].....
View 1 Replies
Jun 21, 2010
im trying to disable a button until anything has been entered into two text boxes simultaneously.
So far i have tried:
If String.IsNullOrEmpty(TextBox1.Text & TextBox2.Text) Then
Button1.Enabled = False
Else
Button1.Enabled = True
End If
However it doesnt work simultaneously, the button will become enabled if i enter anything into either textbox, i cant have any of them left blank.
View 2 Replies
Oct 15, 2010
I have a form with some textboxes on it. The textboxes show values from a table. I have a binding navigator that lets you step through the records in the table and the textboxes update. What I want, is to have a control, say a listbox, that allows you to select a value which will filter the data behind the controls so that you only have one record.
So, for example, say you have a table of contacts. There are textboxes on your form that show name, phone, address etc. You could then have a listbox that showed a list of all the contacts and you could select one, which would in turn the textboxes. The filtering field could be contactID for example.
View 11 Replies
May 5, 2010
I am trying to filter a datagrid based upon stepping through records and suming the contents. What i am trying to do is get to select records that equal (or if the sum of records exceed the entry they revert to the previous record) or less than the entries specified in a combobox on a form.
View 9 Replies
Mar 12, 2010
I have a datagridview and trying to filter recs based on a Date field. This is the
Dim ds As New AOListingDataSet
Dim da As New AOListingDataSetTableAdapters.CallwithNameTableAdapter
da.Fill(ds.CallwithName)
Dim dv As New DataView(ds.CallwithName)
dg1.DataSource = dv
[Code] .....
It works ok when filter is on other fields but brings empty on 'CallDate' date field. I have declared the 'CallDate' field in db as long date format in Access.
View 5 Replies
Jun 12, 2011
My client wants that my table be filtered based on the values from a field regardless of its order.
Example: I want to search for a student whose surname is 'Thomas' but the keyword is not the first in the field. The 'Surname' field, instead, contains the value "Ian Thomas".
If I am going to use this code;
bindingsource.filter = "surname Like '" & textbox1.text & "'"
It will base the searching on the first characters of the field only.
View 1 Replies
Apr 6, 2011
I am creating a project in VB.NET in which one of the reports require that the name of employees should be displayed as column names and whatever work they have done for a stated period should appear in rows below that particular column.Now as it is clear, the columns will have to be added at runtime. Am using an ODBC Data source to populate the grid. Also since a loop will have to be done to find out the work done by employees individually, so the number of rows under one column might be less or more than the rows in the next column.Is there a way to create an empty data table and then update its contents based on columns and not add data based on addition of new rows.
View 1 Replies
Jun 11, 2009
Is there any way to get the ComboBox SelectedIndex based on SelectedValue when Datasource property is set with DisplayMember and ValueMember?
View 1 Replies
Mar 13, 2009
table named mytablei have columns like this
[Code]...
i would like is to include amount1 and amount 2 values into sum only if amount1paidstatus="yes" for amount1 and amount2paidstatus="yes" for amount2, something like for selected day and selected customer.query "should" look something like this:select amount1(if amount1paidstatus=1)+amount2(if amount2paidstatus="yes")from my tablewhere (day=1) and (customer=1)
View 2 Replies
Feb 8, 2012
I have three controls on my form; Textbox1, cboCity, lstCity When something (lets say "a") is entered in the TextBox1; I want to get each and every item in combobox cboCity that starts with "a" and add them to listbox lstCity.
View 5 Replies
Aug 26, 2009
I am trying to write a thread safe application that contains 3 threads : -
1 - Data acquisition and decoding
2- Data graphing
3 - FFT and filtering
Thread 1 is collecting bytes from the serial port and converting them int integers (so taking two bytes) after is has captured 64 Bytes and converted into 32 integers, it then needs to pass the array to the graphing thread.
The graphing thread then plots the data and waits for more data.
Thread 3 also waits until thread one has collected 2023 integers and takes these and performs some FFT calculations (which take time).
My question is how do i share the arrays between the three threads without deadlocking the program? as the serial thread will be flying around reasonable fast (1000 bytes per second) so it will synclock onto the shared buffers for most of the time.
Originally i was going to use two synchronised queues, so when thread 1 has collected 32 bytes it queues the data into the graph queue, and once it has collected 2023 it queues the data into the FFT queue.
Then thread 2 and 3 can simple dequeue the data.
However using queues has the overhead of casting the data in and out, and as i know the data type i was planning on using two arrays :-
Dim GraphArray() as ushort
Dim FFTArray() as ushort
Then Thread 1 adds data to each thread, and thread 2 and 3 simple wait until the correct amount of data is available before removing the data. my question is there an array type that allows me to remove x amount of data from an array?
Because i cannot do this easily with the ararys defined as above (GraphArray, FFTArray), as i was planning on making them 1mByte and allowing thread 1 to fill them Knowing they should never overflow and then let thread 2 and 3 remove x amout of bytes at a time unless there is a better way of doing it
View 13 Replies
Dec 2, 2009
I created a query on a Access database, which I would like to show with the datagridview. So, I created a new table adapter with my query, which creates as well the datatable tbl1. Then, the wizard created the datagridview for me, showing the correct data. Now, I would like to filter these rows: I already read it is possible to do it by simply clicking "Add query...", but I would like to do it in a different way. I have some comboboxes, and I would like to use the strings inside them to filter my table tbl1. Is it possible to apply those queries one after the other on my datatable tbl1? I am able to filter only once with:
Me.tbl1TableAdapter.FillBySomething(Me.DataSet.tbl1, params...)
But, if I wanted to filter the result again?
View 4 Replies
Sep 25, 2009
I am using a datagrid to display a dataset. I would like to filter rows on certain fields (ex: ____ (Male/Female). I would want to it post-data retrieval on the client side.
View 3 Replies
Jan 14, 2009
I have a database with a Student table and a Class table. There are many students and many classes and each student is a member of a class.I then have a windows form that needs to display a list of student names in a listbox. However, I have a different form for each class. So for example in this form I have coded below, I need to display all students that are members of class51. The code I have so far is reading in all students from tblStudent and this is not what I want. I know that if I was doing SQL or something I'd simply write SELECT * FROM TBLSTUDENT WHERE CLASSID =his?
Private Sub frmAttendace51_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
'clear data set of any existing data
[code].....
View 7 Replies
Jun 15, 2012
I have a combobox where I use datasource to populate it with data, in the key press event I have the following coding which i use to filter the data.
With Me.Combobox1
Dim ToFind As String = .Text.Substring(0, .SelectionStart) & e.KeyChar
Dim Index As Integer = .FindStringExact(ToFind)
[Code]....
I know this would be possible by me changing the style to dropdownlist but its not exactly what I was after.
View 2 Replies
Feb 25, 2009
I am using vb2005, and I am using MS Access 2003 as my database.
This is what I am doing and this is what I would like to happend
I have two combo boxes, combobox1 and combobox2
I have two tables, Application table and Group table
Here is how the data is going to be display:
Combobox1 = Application Table
Combobox2 = Group Table
In the Application Table I have 3 columns ID, Code, Description
The same information applies for the Group table
THis is an example of the Application table
CODE DESCRIPTION
1 Purchasing
2 Stores
3 Assets
[Code]....
View 2 Replies
May 7, 2009
Private
Sub
ComboBox1_SelectedIndexChanged(ByVal
sender As
[code]....
View 10 Replies
Dec 11, 2010
I am developing a vb.net application with MS Access Database . I have a field(cut) with double data type in table marks of markss.mdb.[code]On debugging , when I enter ,say 7.9 , in Textbox 1 ,I get an error saying Data type mismatch in criteria expression.
View 1 Replies
Jun 21, 2010
data type mismatch criteria error .. please help im getting this error .. and i don't know where's the error ..
Private Sub frmUpdateChapter_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
con.ConnectionString = "PROVIDER=Microsoft.Jet.OLEDB.4.0;Data Source = D:dbCAI.mdb"
con.Open()
[code]....
View 1 Replies
Jan 24, 2012
I am using parameters in my code to update records in an access database.
One of the fields I am using in my sql Query Update statement is the ID field and it is causing this error -
Data type mismatch in criteria expression.
I have isolated the error and it occurs with the ID field in the Update query.
The DataType for the ID Field in Access is AutoNumber, Field Size is Long Integer and New Values is Increment.
In my code I have declared the Data Type as Integer.
Is there an obvious mistake in my code?
[Code].....
View 3 Replies
Jun 17, 2011
I have a reader that pulls dates out of a database, and saves them in a list.
dateList As New List(Of Date)
View 6 Replies
Mar 20, 2012
Probably a simple problem but I'm failing to see how or why it's happening.
The error message I'm getting is Data type mismatch in criteria expression.
My coding is below:[code...]
The error is coming up when i'm filling the dataset, i've already figured that it works when the WHERE is removed.
So i'm assuming the mismatch must be from (VirtualLearningExercises.Level = '" & UserLevel). UserLevel is defined as a integer in vb and VirtualLearningExercises.Level is data type number on access.
View 5 Replies
Jun 11, 2011
I've had this problem many, many times. And it's always turned out to be a small typo or "" around an integer, but I just cannot find what's wrong with my SQL Statement this time! SELECT Card_ID FROM Payment WHERE Customer_ID = 12 AND Card_Number = 1231231231231231 The table and fields are named correctly (the table is actually a query).The only thing I can think of is the card number being too large, however it works fine in my INSERT INTO statement!All of the fields are formatted as their respective data types, ie. Integers are set to integer, not string.
View 7 Replies
Mar 6, 2012
DataGridView filtering. I have this data bound to a combobox:
Product Index
Prod1 1,2
Prod2 7,8,9
Prod3 10,11
Actual Table structure is:
Index Product
1 prod1
2 prod1
7 prod2
8 prod2
9 prod2
10 prod2
11 prod3
(Product is the Display Member, Index is the ValueMember)
On the combobox's SelectedIndexChanged event, I'm filtering the DataGridView:
DGVCustomers.DataSource.DefaultView.RowFilter = "indexes like '%" + MyDropDown.SelectedValue + "%'"
If MyDropDown.SelectedValue is "1,2" then any record without either number will not be shown , in addition "7,8,9" will only show customers with that string... etc etc. How can I filter the DGV correctly with the CSV style data? (It's not my data unfortunately!)
View 10 Replies
Jan 12, 2009
I am trying to make a small application and I have a problem in binding data after filtering them.I use VB 2005 and SQL 2005. The data are shown in datagridview and I bind the selected row to the text boxes of the form. eg.[code]Later on I search the data for some records and at the same time I remove the databinding. When I try to bind them again it does not work because the index is from the whole data and not the filter data.I have fixed the problem in another situation where I had autonumberin as a primary key and I used this as an index. In this case I use platesno as an index and it's not working.
View 3 Replies
