Focus To Control Where Name Is Stored In A Variable?

May 31, 2009

i have few cotrols on form (text box, combo box, checkbox etc). Thru some condition i stored the name of the control in a variable.

for example

dim cntrlname as string
if x=1 then
cntrlname = 'txtCode'

[code]....

at some other place on form i want to use above variable to give the focus to control.

View 9 Replies


ADVERTISEMENT

Manipulate A DataGridView Control When It's Name Is Stored As A Variable?

Oct 9, 2010

I have a number of tabpages that each contain a datagridview control only. Based on the results of a SQL statement I then loop through each tabpage and set its name. The reason for this is that at runtime (and depending on the results of the SQL statement), the contents of each tab page will change - henceI loop through the tabpages and set the name/ text (to reflect what will later be shown in the DataGridView)

The datagridview control on each tab has the default name e.g. DataGridView1, DataGridView2, DataGridView3 so it's easy for me to loop through them e.g.:
for i as integer = 1 to 3

[code].....

View 4 Replies

Forms :: Changing The Backcolor Of A Control When It Has Focus And Lost Focus?

Feb 16, 2011

Is there a more efficient/easier way changing the backcolor of a control when it has focus and lost focus? Let's say I've got 10 text boxes. Right now I would have 20 different events...10 for Enter event and 10 for Leave event. Of course, entering would change the back color to "green" and leaving would change it back to "white".

[Code]....

View 4 Replies

Lost Focus Event, What Control Is Getting Focus?

Mar 21, 2012

I have a textbox on a form that when it loses focus it updates other text boxes on the form. But before it updates the other textboxes I check the input value in the textbox lostfocus event if it is undesired I return focus to the the textbox and alert the the user with a msgbox. However where my problem is, is that when the cancel button is clicked I don't care what the input in the textbox is because the changes are being canceled but if the value is undesired the it keeps returning focus to the textbox instead of canceling the changes. Is there a way to see what control was clicked on before or in the lost focus event? Can't seem to figure it out tried enter and leave events but no luck!

So for example something like this...

Code:
Private Sub TextBox1_LostFocus(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles TextBox1.LostFocus
If Control that was clicked <> btnCancel then

[Code].....

View 2 Replies

Set Focus On The Keydown Event So After The Button Control, Sets The Focus Into The Keydown?

Dec 15, 2010

Is it possible to set focus on the keydown event so after the button control, sets the focus into the keydown? although says often control can have focus,.Putting a button and a keydown event on a form...

View 2 Replies

Getting Value Stored In A Variable

Aug 6, 2009

[code] i want to get the value of n from using x where variable name is stored in x,

View 7 Replies

Execute Value Stored In A Variable?

Oct 17, 2011

I was wondering if there is anyway you could go about executing what's stored in a variable....kinda like in an #Eval statement....

E.g.

dim i as integer
dim PlaceHolder as String
for i = 1 to 10

[Code].....

View 7 Replies

Calculation, Variable Is Stored As An Integer?

Oct 21, 2011

Doing a calculation, variable is stored as an integer.It got too 2,147,483,647 before giving me an arithmetic overflow. Anyway i can increase the number it can hold?

View 7 Replies

Call Or Set Variable Value When Its Name Is Stored As String

Jun 6, 2011

My application has a variable VAR_1 that is boolean, this name is also stored in database.

Now I need to set VAR_1 value in my app by reading database and asign x value,

How do I call VAL_1 from a string?, this is:

Dim VAL_1 as boolean

Dim str as string = myTable.Rows(0).item("x") <--- Here's the name "VAL_1"

But I just can't find how to call VAL_1 by converting "VAL_1" to variable

View 10 Replies

Display A String (stored In A Variable) In Notepad?

Jul 12, 2009

I want to display a string (stored in a variable) in notepad(or any other default text editor depending upon the system). Saving to a text file is not necessary. I just want to open Notepad with an unsaved file containing the text. Please help

View 4 Replies

Passing Variable Values To A Stored Procedure?

Jan 14, 2011

I am trying to pass some declared variables to a stored procedure. Here is my

Private Sub Button1_Click_1(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles startpayrollButton.Click
Dim ssql As String = "select MAX(payrolldate) AS [payrolldate], " & _

[Code].....

View 10 Replies

Pass And Access The Array Variable In Stored Procedures?

Jun 10, 2011

How can i pass and access the array variable in Stored Procedures

View 3 Replies

VS 2008 Filling A Datagridview With A Stored Procedure Variable?

Nov 4, 2010

Using VB2008 How can we fill the datagrid with information from a stored procedure and a sp variable.We have a dataset named: DBnamesDataSet, a source: ShownameBindingSource and a adapter: Show_nameTableAdapter.

Stored procedure:
alter PROCEDURE [dbo].[show_name]
@name varchar(50)
AS

[code]....

View 8 Replies

Date / Time Variable Stored In A Column In An SQLite Table

Jan 26, 2012

I have a date/time variable stored in a column in an SQLite table. I need to select the string with the last 3 digits trimmed off. [code]

View 1 Replies

Efficient Code To Split String Variable And Stored It Into Array?

Jul 21, 2011

For example, I have string variable (MyString) as below.MyString = "First word || second order || third example || fourth item || fifth stuff"

There are separator "||" at MyString variable. I want MyString variable is spited based on separator "||"and stored it into new array variable.

Could you advise me the most efficient code to do this job in VB?

View 4 Replies

Control Focus / Control Select

Jun 1, 2010

I have read this many times. Focus is a low-level method intended primarily for custom control authors. Instead, application programmers should use the Select method or the ActiveControl property for child controls, or the Activate method for forms. What exactly is the difference? Subnet Calculator / Planner Serial Port

View 12 Replies

String Variable For Use With LINQ To SQL Class Stored Procedure Call Has Weird Message?

Feb 4, 2010

In my project I am using a LINQ to SQL class that contains a stored procedure which includes a string value as an output parameter.So to capture that, I created a string variable as follows in the procedure:Dim spOutput As String? However, when I do this I get the following message "Type 'String' must be a value type or a type argument constrained to 'Structure' in order to be used with 'Nullable' or nullable modifier '?'"

View 2 Replies

Set A Focus For A Control In VB?

Sep 11, 2009

how to set a focus for a control in VB

View 3 Replies

Set Focus On Control?

Jun 1, 2011

I tried to used this but no luck[code]...

if the use click the radio button i want to focus on Hyperlink4

View 2 Replies

Focus To A Control In Groupbox?

Jun 19, 2009

from my main form i'm giving focus to a control dynamically to calling form for example i have 3 child form, child1, child2, child3 form main form before i call the form i give the focus to a control which is set on some condition

[Code]...

and when i call child1.controls(cntrlname).focus() it throws the error. any idea how i can give focus using above code to one of my control in groupbox.

View 2 Replies

Set Focus To A Specific Tab On Tab Control?

May 24, 2010

I need to know how to set the focus to a specific tab on a multi-tab tab control.[code]each followed by a .Refresh, but the tab control stays on the same tab. Do I have to cycle thru the index to get back to the base tab on the form, or what?

View 1 Replies

Set Focus To Control Using Shortcut Key?

Feb 2, 2011

I have to set focus on combobox control when F2 key is pressed on the key board.

View 2 Replies

Setting Focus To A Control?

Apr 5, 2009

I am using VB.Net 2005. The form contains many controls. When the tab or enter key in the keyboard is pressed I want the focus to move to the next control in the form in some order.

View 3 Replies

Textbox Focus Out Of Control?

Jan 15, 2009

i have a window form which has text boxs, buttons and radio buttons.when the form is loaded i want to put the cursor focus to TextboxA. But what i got is it didn't go to textboxA although I call TextboxA.Focus() at Form_Load event.In my Form_Load event() i have:

1) assign a value to a global variable.
2) hide a panel
3) set this TextBoxA.focus.

What i found is if i didn't checked the radio control to True in Form design time, the focus is go to that place, textbox.If i set the radio checked = True in form design time, focus is go to this radio button although i set TextBoxA.focus in form load line end.In my radio_checkedchanged() event, I have:

1) clear all textbox and set the focus to textbox. ( i even tried remove the set textbox focus line in this radio event but it didn't work)

But i must at least set this rdo button checked = true to carry on.if i set true, focus get lost.My program is a simple user registration form. Here is the

vb.net
Private Sub rdoNew_CheckedChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles rdoNew.CheckedChanged
If rdoNew.Checked Then

[code]....

View 2 Replies

Find Out Which Control Has Focus In .Net Winforms?

Mar 18, 2009

How do I find out which control has focus in winforms?

View 4 Replies

Have A Control Ctrl Which Is Expected Focus

Apr 21, 2010

I have a control ctrl which is expected focus. [code] API SetActiveWindow might be a choice.I don't know how to use it.

View 6 Replies

Javascript - Control.focus() After SelectedIndexChanged?

Mar 7, 2011

I need to focus on a textbox after an item has been selected from a dropdownlist.

I've tried control.focus() and setfocus().
The last thing I've tried was Set_Focus(dtbEffectiveDate.ClientID) inside the SelectedIndexChanged method with the folowing method.

[code].....

View 4 Replies

Mouse Wheel When Over A Control - Regardless Of Focus?

Jul 16, 2009

how to capture the mouse wheel if the mouse is directly over my control - regardless of what form / control has focus?? - however if another window or control is over the control at the time it won't scroll.

View 3 Replies

Set Focus On A Node In A Treeview Control?

Dec 31, 2009

I have a treeview-control and a datagrid-control on my form. In my datagrid-control I have two columns with records that contain the the content of the parents and the childs of the treeview-control. On starting up my application, the treeview-control is filled with the records that we also see in the datagrid-control.

[Code]...

View 2 Replies

VS 2010 Set Focus To A Specific Control?

Jan 30, 2012

I have a form with 3 controls that have TabIndex values set:Combo box (cboPostpone) - TabIndex = 0 Postpone Button - TabIndex = 1 Install Now button - TabIndex = 2

The code below is part of the Timer1.Tick event The code below seems to change the focus but then when trying to tab through the controls, it stays on the combo box.

[Code]...

Lastly, I removed cboPostpone.Focus() command from the Timer1.Tick event and move it to the Postpone button Click event. I run the focus command right after the me.hide command. I delayed it the first time and it came back with the Postpone button in focus again instead of the combo box.

View 3 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved