The Parent has a Tool Strip and on the tool strip is a button that when clicked loads the child, this works fine.But when I set the child form to maximize its title-bar jumps over the Parent tool strip. Pushing it down a bit. I do what this. I would like the child to be completely contained within the Parent including the Parent forms tool strip.
View 6 Replies
Okay I have this two Forms.. one for the parent and one for the mdichild. I have a toolstrip menu in the parent with a button(with a pic) named close document.
View 2 RepliesI need to be able to add buttons to a tool strip at run time. As of now I've been able to get the buttons to display with a nice little picture just how he wants and some text under it. Just can't figure out how to "enable" the click event for these buttons. Obviously I need them to do something rather than just sit there looking good and this is where I'm stuck. Right now I'd be happy for a message box to come up saying yep I'm working as I could then work with that. This is what I have for code so far... this is just to get it working I'll work on the actual code later.
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim btnSomething As New ToolStripButton
btnSomething.Text = "Test 1"
[code]....
"Form1" has a ToolStripContainer1.TopToolStripPanel which contains a ToolStrip with buttons. The buttons work on ONE click when "Form1" is active.If I click on another window and then return to "Form1" the ToolStrip buttons take TWO clicks to activate.The first click returns focus to "Form1" and the subsequent click fires the button event.I want the buttons to work on the first click and not require two clicks.Note that ordinary buttons on "Form1" that are not part of the ToolStrip work on the first click when returning from another window/form?
View 1 RepliesI have created a parent form and 2 child forms. Each of the forms have menustrips. When i run the application the menu strip appears on the parent form but not on the child forms. I have the menu strip set to visable.
View 4 Replieshow to put the tool tip text in status bar label this in form load event
View 14 RepliesThis is a very basic question, I have a parent form and a child form and both window state are set to maximize, would it be possible to remove the toolbar at the top? I have tried most thing like setting the form border style to none on the child form but still I get two tool bars. I would like to remove the tool bar in the black square
View 5 RepliesEven i have use the "BringToFront" keyword for the childform but its not working. The buttons on the main form are still displayed above the childform. But when i open another form from the childform, it is displayed properly
View 1 RepliesI'm trying to accomplish something and not sure it can be done or rather if I'm approaching it correctly. Is there a way to access a MDI Parent's menustrip without merging the childform into it? I've done the merge before and that works fine. Reason I'm trying to figure this out is that I've started toying with a windows ribbon control and am wondering how the menu functions are performed with this control. In other words you wouldn't create one on each child form and have some how merge them so there must be a way to do this from the parent control.
Things I've tried thus far are to create a public sub in the childform that will save the data to a database. Once the save button is clicked in the mdi parent's menustrip and determines the activechild it will then call that sub procedure on the childform. However it doesn't persist the data, in other words passes a whole lot of nothing to the database even though the values don't dissappear on the child form.
ive been trying to get statusstrips merging so i can click a label to bring the child form to the front when i have multiple childforms open. I have this code which does work but on closing it leaves the label on the mdiparent and also im struggling with the bring back to front code. i dont want it to open another form just bring it back to front. I have statusstrip set to visible false on my childform. heres some code for merging, this is in mdi parent:-
Private Sub Form1ToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Form1ToolStripMenuItem.Click
[Code]...
I have added a toolstrip to a windows form in my app. How do i get the Print and Print Preview to work.
View 3 RepliesI have various buttons in a tool strip which perform various commands aswell as function keys that carry out those same commands. So I use:
toolstripbutton.performclick()
to execute the same code
Im looking to anchor a toolstripcombobox?
View 3 RepliesI copied across all the code and got it going, but when I copied across the tool strip menu it came up with a Red X, where on the old project it was displaying fine. I removed the copied tool strip and dragged a new one onto the form, but even a brand new one with no modification comes up with a Red X. I tried a couple of the suggestions I could find on the internet, but none of them seemed to make any difference.
I tired stepping through the code (F8) but it does go anywhere near any tool strip code. I added a New Sub complete with InitializeComponents, but when it gets to initialise it goes yellow and then next step goes to End Sub. I though in previous projects it went to another class and setup the components on the form. Just got home and thought I would throw a button on the form to see if it would display that and it does.
Ok, I'm a very inexperienced programmer writing my first "non-example" program without step by step instructions provided by the learning material. That said, I am still trying to grasp all the different concepts, syntaxes, tools available, etc. So I wanted someone to take a look at my code and give me some input as to how I can make the code more efficient because I can already envision some bugs that could come up from the code I have written right now.
So I'm writing a program that will have two controls (as of now, which I might think of other controls that might become useful) that will be in a boolean state. I have a checked tool strip menu item and a check box item. I need to have the clicked event run some statements that will either set a textbox's visible property. But my question is whether I should keep the code as it is, if I should create a new module, use a sub procedure, or what is the most efficient way of dong this? Here's my code but I can already see some functionality problems if I decide more controls that accomplish the same task as having to go back and add code to the existing controls. Should I not try to keep the code in a seperate module so all I have to do is change the code getting called in that seperate module instead of actually going through the event code and changing/adding statements repetitively? Anyway:
[Code]...
I'm still unclear as to how this works. The examples in the tutorial don't help very much, and, sorry, I could not make the examples in the previous thread work either and I don't understand the Lost Focus event. What I want to do is fairly simple. 1.) Enter the Test Duration as a string in the tool strip menu item text box in form1. 2.) Make the variable TestDuration equal to the string in the tool strip menu item. 3.) Print the value in a message box after button1 is pressed so I know that it's been captured. Attached is my simple code. This is probably very elementary and I'm sure I'm doing it wrong but I haven't a clue just yet.[code]...
View 5 Replieswhat is the extension manager in the upper tool strip menu what does it do and how ?
View 6 RepliesWe have a menu strip with 4 toolstripmenuitems. In mosue right click i need to show one toolstripmenuitem as dropdown menu. here i am able to show that tool strip menu but it is populating at the top left corner of the screen. I need to set the location as cursor location.
View 1 RepliesI'm trying to create a toolstrip using the system render mode, but the split button control doesn't look right in Windows 7 It's almost like the drop down button is offset to the right by 1 pixel, or part of the border is missing.
View 3 RepliesI'm creating a Win Form app in VB Express 10, which includes an animation. While the animation is running, it would be helpful to fade (maybe 50% opacity) a tool strip menu item's image so that it would not distract from the animation. I've tried to change the item's transparency in the property drop down, with no effect. I think I would need a function to add to the animation start button to fade the tool strip menu item's image to 50%. Then if the animation stops, or the image is clicked, a function to re-establish 100% opacity.
View 2 RepliesI making a program where the program has different codes for every item that I'm selling, so like 1 item might cost $700 and another item might cost $1000. Then I'm importing this to notepad.
View 2 RepliesHow Do I Make It So You Can Press Enter Instead Of A Go Button In The Website URL Box (Tool Strip Combo Box)? I Am Making A Tabbed Web Browser And The Current Code For The Go Button Is:
View 1 RepliesIn word/excel/office programs when you press the file menu item at the bottom a list of files recently used are shown, i would like to do a similar thing but i would like to put files from a certain folder with a certain extension (.xml) into my file menu item so the user can select to view the files.
I think i need something like:
For each file (extension .xml) in myFolder
If menuItem = Nothing
[code].....
I am in the process of upgrading a VB6 Project to Vb.net. My problem is that when I open a child form in my project from within the Parent form a new instance of the Parent form is created. The code is fairly simple:
frmnewContract.MdiParent = Me
frmnewContract.Show()
I an trying to create a GUI and I have added a menu strip, under the tools section of the menu strip, I have added a settings option. I want to click settings and have it open another windows form linked to the main windows form with the menustrip in order to set certain parameters. How do I link these two boxes using the settings menu strip?
View 1 RepliesWhen the parent form has a menu strip and the child form has a menu strip the program will add all of the child menu items to the right of the parent's items. I have two parent items "Help" and "Exit" that I want to always be at the right. Is there a way to add the child options into the middle?
View 2 RepliesMy application having one mdiform in that form six child forms are there.Switching of one form into anather form blur bars are appearing form at the title of every opened child form.These six child forms are opens in mdiform.how to remove the blue bars are appearing from every opened child form in mdiform.how to remove blue bar are appearing from switching of one childform into anather in mdiform using vb.net?. how to remove these blue bar.
View 1 RepliesI have a main form, and some sub forms, and each sub form can have some sub forms. When I have multiple sub forms open, and I try to get data from the parent form, it returns the data from the wrong parent form.For example I have two instances of Mainform.subform running. If I do something like this in a child form of one instance of the subform. It returns data from the other subform.
dim l = Mainform.subform.listofdata
Edit:I am using visual Studio 2008. Winforms, form designed using designer. In my mainform I am doing this
Protected Friend frmMain as Mainform
frmmain = new mainform
In frmMain I am doing this
Protected Friend frmsub as new Subform'
frmsub = new subform
[code]....
1- how I can put picture in tool strip and put it convert to split button without the picture go invisible when i click on it
2- how can I make tabs in the forms
3- I want to put pictures in the form in the same place For Example when the user check the radio button or when the user choose the name in the combo box a specific picture should be display?
This is a VB.Net newbie question. I am working through the Microsoft Press "Build a Program Now!" book using VB 2005. I am in Chapter 6 where you build a simple browser. But, my problem is with Tool Strip Containers. I am running Visual Studio 2005.
[Code]...
