I have a method where I am making a trial period.When the date has exceded its trialperiod the program will not close.The code looks like this:
Public Sub DemoRestrict()
If My.Settings.dteStartDate = Nothing Then
My.Settings.dteStartDate = Now
[code].....
I have a method where I am making a trial period. When the date has exceded its trialperiod the program will not close.
The code looks like this:
Public Sub DemoRestrict()
If My.Settings.dteStartDate = Nothing Then
My.Settings.dteStartDate = Now
End If
If My.Settings.intTime = Nothing Then
[Code] .....
Why does the form not close? Is just runs to the next method in the load sequence.
my web browser is my main form and it has a number of sub forms , how can i set it that when i close the main form my sub forms dont close ?
At the moment when i close the main form all the forms close
I have a situation where me.close() doesn't close the form. I have a form with a button with the code seen below. What happens when the button is clicked is the new form shows, but the original form(calling form) is still there. When I go into debug mode, I can see the me.close() execute, but nothing happens (calling form stays open). When I close the second form both forms close. If I comment out the call for the second form to open the first form closes without problem.
Private Sub cmdNext_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdNext.Click
Dim f As New frmOrder3
[Code].....
how can i close all forms except for one form? vb.net 2003
View 4 RepliesIt seems that my form refuses to draw quickly enough. I am using this
[code]...
This ends with the form freezing for a moment, and then it resizes, but it's not until the end of the resize does it display properly, during the resize, their is a big black bar where the new part of the form is supposed to be.And when it's done resizing, it draws itself correctly.
I created a new windows form application using VB 2010. I added no controls to the form. This is right "out of the box" app created by the VB windows form app wizard. I next added a FormClosed event handler. The handler gets called whenever I click the "x" on the form.Later I needed to close the form programatically in response to an event from an automation client. So I did something apparently farily dumb. I called "Me.Close()" Nothing happens. The form stays up on the screen. My FormClosed event handler is NOT called.The MSDN entry for "Close" doesn't give me a clue as to why this call doesn't work. Indeed, it seems to imply it should work.So I added a couple of lines of code after calling "Close()" since when I stepped across that line of code it appears that no other code would execute. Sure enough, as soon as I step over the call to Close(), I cannot step through any other lines of code.
Then I found another piece of form code while searching around and I found the code had what appeared to be an odd keyword just dangling in the code. The keyword, colored by the IDE as a VB keyword?So I typed "End" into my method and intellisense shows me "End Statement. Stops execution immediately". And it does. But is my FormClosed event handler called. No.I added "Inherits System.Windows.Forms.Form" to see if that had any effect. No change.So how does a form close itself programatically?
how can i do that? first form close and second open........i did that but first is only hiding not close
View 2 Repliesust want to know a better way to remove the close "x" button of the form, or atleast every time i close it end up openning again.
View 5 RepliesI am creating a VB program that has a Main class, and 4 windows forms. Each of the forms has a back and a next button to navigate trough the forms. The problem is that when I hit next (Here is the code)
Private Sub continueButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles continueButton.Click
VS 2008 Remember Textbox Text when Form reopens
When my application first loads the parent opens and I select my child form from toolstrip:
'In parent open the form when option is clicked
Public Sub Showfrmitemreview(ByVal sender As Object, ByVal e As EventArgs) Handles itemreivewStripMenuItemA.Click, itemreviewStripMenuItemB.Click
[Code]....
Nothing happens I don't even get an error message. I've played around with the code numerous times and the only thing that worked was to have it open outside of the parent which I do not want to happen.
I've made an app with vb 2010, which holds a mainform. On it is a menutoolstrip with button, when I click on that button a second form is opened on a second monitor and the button is being checked (different color).
When I click the button again, it is unchecked, but the form on the second monitor is still open, while it should be closed.
Here is the code I use:
CODE:
Private Sub OK_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles OK.Click
Dim con As New SqlConnection("Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirector y|Database1.mdf;Integrated Security=True;User Instance=True")
[code]....
Is there any way to skip a the validating event of the active control when the close button of the form is clicked. It is very annoying when user wants to close the form, but due to the validate event of the active control, it asks for the valid input. The user is forced to give valid input to close the form. I have searched a lot for this on net but no any proper solution could be found.
View 5 RepliesIn a program I'm working on, I want a "Loading..." dialog to close when it can't log in to a site using the username and password provided by the user. Basically, I have the code set up right because the function it is supposed to carry out when that occurs does work, but for some reason it ends up in some really weird stuff happening. In the Loading form, I have it set to do "Form1.Show()" and then "Me.Close()", assuming it would simply show the login form and then close the Loading form. However, when this happens, the Loading form closes, and then for only an instant Form1 shows, and then the Loading form shows and Form1 closes. This happens forever until I stop the debugging, and I can't seem to figure out why. Am I using the wrong method? What exactly does Me.Close() do anyways? All I want to do is close the form and open another
View 5 RepliesI have a main form that has a button with which a smaller form is shown. Think of the smaller form as the Find/Replace dialog in many applications, such as Notepad. It's important that the form is (what I believe is called) modal. What I mean is that it always stays on top of the main form. I ensure that by calling the Show method with "Me" as the owner argument. Whenever the small form loses focus it will not disappear into the background but stay visible (albeit out of focus). If you don't understand open up Notepad and have a look at the behavior of the Find/Replace dialog.
Here's my problem: instead of actually closing the form when the X is pressed, I want it to simply Hide itself, so its position and the state of any controls (checkboxes etc) is preserved automatically.To achieve this I simply cancel the FormClosing event and Hide it:
vb.net
Private Sub Form2_FormClosing(ByVal sender As System.Object, ByVal e As System.Windows.Forms.FormClosingEventArgs) Handles MyBase.FormClosing
[code]....
To show the form, I use the following (note the (Me) to make the main form the owner of the form; this ensures that it remains visible even when it is out of focus):
vb.net
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Form2.Show(Me)
End Sub
Now. When I run my project, and open the Form2 (small form), then hide it again (by 'closing' it), I can no longer close the main form (Form1)! It seems the main form cannot close when the small form still exists (albeit invisible)...?? When I don't use the Me argument in the Show method, I don't get the behavior I want. I know I can set the TopMost property to True but that will also cause it to become visible on top of all the other forms, even windows not part of my application.
I have set up a notify icon for my form. I want to make it so that when the user clicks the close button that it doesn't close the form it just takes it to shows the notify icon. They can exit the program from the notify icon. Can someone tell me how to keep it running?
View 2 Repliessometimes, when I use Form.close() when debugging my program, although the form is closed, the application is still running. I noticed this behaviour when using the msgbox function.
View 3 RepliesI try to transfer a vb6 application to vb2010. In the vb6 I start with a login panel that the user enter uid and password autenticate with the DBServer if ok show application main menu and close the login form. the order of the me.close() after the mainform.show() does not change, The application ends.
View 5 Repliesi have a problem with trying to get 2 forms to close at different times using a timer on each of the 2 forms.
This is my form layout:
Quote:
frmMain
Frm1
Frm2
Frm1 and Frm2 are identical to each other. FrmMain has 2 buttons on it. One button to call Frm1 and the other to call Frm2.Frm1 and Frm2 each has a timer. It counts down to 0 and then does a .close(). However, if i pause between clicking the second button they both seem to always disappears at the same time.I would do something like this...
Click on the first button (showing the Frm1 form)
wait about 10 secs...Click on the second button (showing the Frm2 form)they both are shown on screen...hen they both disappear at the same time.... which shouldn't happen since i clicked the Frm2 box 10 seconds AFTER Frm1... So Frm1 should hide before Frm2 does...but it does not.
[code]....
I have two forms frmMain and frmNew, and one module modMain. In modMain I hold public variables which are needed for application. My question is how to open and close those two forms when needed? I ask this because if i set frmMain as startup form, then when closed, application will end, and one of those two forms will always be displayed. Also if I set frmNew as startup form, then when I close this form, application will also end. Is there a way to do this from module or something so my application won't end after closing and opening any of those two forms?
View 2 Repliesi have a problem with trying to get 2 forms to close at different times using a timer on each of the 2 forms. This is my form layout:
[Code]...
I am really new to Visual Studio and VB and I am having trouble closing a single form:
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Me.Close()
End Sub
When I use Me.close() associated with this button it closes the entire project and not just the single form can anyone.
get a button on form A to open form B and then close (not hide) form A when clicked?Background: I am coding a VSTO application for Excel in VB2008.
Private Sub FormAButton_Click(ByVal sender As System.Object, _
ByVal e As System.EventArgs) Handles FormAButton.Click
Dim FormB As New FormB
[code]....
In my card game program, I have used 4 main GroupBoxes to act as dialogue boxes. Some contain additional GroupBoxes to house such things as RadioButtons, TextBoxes and CheckBoxes.Software places them when and where needed, so I usually move them apart in the Design screen to keep them all visible at once. However, with each new GroupBox I added to the program, their behaviour became increasingly vexing.In the design window, they are not allowed to overlap, or they will either partially or completely disappear. When they disappear, I have to find them with the Properties Viewer (when selected, the 4 sizing blocks appear and I can tease the drag symbol to appear).Worse, when my program is running, a GroupBox left in the Design mode in an "unfavoured location" (for lack of a better term) will refuse to appear when called.
I have single stepped past the code that positions the GroupBox and makes it visible and I have noted that the top and left positions are correct, but when I let the mouse hover over the word 'Visible' in the line "GroupBox1.Visible = True" the popup reports it as False.There is nothing I can do at run-time to make the GroupBox appear. I must return to the Design window and try moving it to a more favourable location.
I have an old app still written in VB2003 that required some changes, part of that was revamping a menu that isn't behaving.I've deleted it and it doesn't show in the designer but when I start the program there it is, and still not correct.How do I really get rid of it so I can build another one?I'd hate to have to delete the whole MainMenu, this is the 5th in line, that would be a lot of re-creating.
View 8 RepliesHow can i close all forms I use wpf vb 2010 To load other form i use like Private frm As MainWindow = New MainWindow to open the window i used frm.Show()and to close it i use frm.Close()Now I have two forms like form1 and form2 I want to open form2 when i click on the button - ok it's easy The Question How can i closed form1 from form2 when i open form2 using button when i user Private frm As form1 = New form1 frm.Close() It like a cricle and can't closed
View 2 RepliesThe database application starts from the login form, and if the username and then password are correct, the main form with buttons for other forms opens.One of the buttons is logoff button, which should closes/unloads all the forms open at that time and then opens the login form.[code]...
View 4 RepliesI'm currently in the process of building a text editor type program, and have run into a brick wall. I haven't done VB in years, so I may just need a little reminder on some things. I have coded everything so far as far as opening files, saving them, changing fonts, colors, etc. However, I'm looking to add a Close button to my menu strip that will just close the currently opened file, and not the entire program, while also ask the user if he/she would like to save before closing the file, and then if they select yes, it will show the save dialog, and if not, it will go ahead and close the currently opened item.
View 2 RepliesOkay so ive got this project iv been working on. Almost ready to get the beta on its way, last thing I needed to do is retrieve the EXE and change its icon. I found the EXE in the "bin" folder. Copied it to desktop. I went through the properties, no way to do it. Then I searched youtube, and google. Only possible way to change it I found was to use softwares. I tried Resource Hacker (ive used years back, this program was handy), but it didnt work. I replaced the default window-looking box icon with my icon, and that seemed fine. But once I saved and exit, the new file with updated icon was supposed to be created. Well it was, except just looking at the file icon I knew it didnt work. But when I right click and go to properties, that one changed. So why dosnt the MAIN icon change? In RH I seen no other icons
View 5 Replies