Get 2 Forms To Close At Different Times Using A Timer On Each Of The 2 Forms
Apr 21, 2010i have a problem with trying to get 2 forms to close at different times using a timer on each of the 2 forms. This is my form layout:
[Code]...
ADVERTISEMENT
VS 2008 : Get 2 Forms To Close At Different Times Using A Timer On Each Of The 2 Forms?
Apr 21, 2010i have a problem with trying to get 2 forms to close at different times using a timer on each of the 2 forms.
This is my form layout:
Quote:
frmMain
Frm1
Frm2
Frm1 and Frm2 are identical to each other. FrmMain has 2 buttons on it. One button to call Frm1 and the other to call Frm2.Frm1 and Frm2 each has a timer. It counts down to 0 and then does a .close(). However, if i pause between clicking the second button they both seem to always disappears at the same time.I would do something like this...
Click on the first button (showing the Frm1 form)
wait about 10 secs...Click on the second button (showing the Frm2 form)they both are shown on screen...hen they both disappear at the same time.... which shouldn't happen since i clicked the Frm2 box 10 seconds AFTER Frm1... So Frm1 should hide before Frm2 does...but it does not.
[code]....
C# - What Happens If Call Start() Two Times On Class System.Windows.Forms.Timer
Dec 28, 2010Imagine that I have a System.Windows.Forms.Timer with 1000 ms interval. If I call Timer.Start() method and after 500 ms I call again Timer.Start() what happens? The second Start call will reset the interval or not? Are there any side effects?
View 3 RepliesForms :: Multiple Forms Open And Close
Apr 16, 2009I have two forms frmMain and frmNew, and one module modMain. In modMain I hold public variables which are needed for application. My question is how to open and close those two forms when needed? I ask this because if i set frmMain as startup form, then when closed, application will end, and one of those two forms will always be displayed. Also if I set frmNew as startup form, then when I close this form, application will also end. Is there a way to do this from module or something so my application won't end after closing and opening any of those two forms?
View 2 RepliesForms :: Find If Times Is Between 2 Times?
May 13, 2009I have just started using vb.net and I have a checked list box with times throughout the day shown as
00:00 - 00:14
00:15 - 00:29
00:30 - 00:44
00:45 - 00:59
What I am trying to find is a way to get the current time and find which list item it fits into. What I think I need to do is to first of all get the current time and then go through the list splitting each item into 2 times and seeing if the current time fits. For example: Split the item 00:00 - 00:14 to 00:00 and 00:14 and then check if the current time is more than 00:00:00 but less than 00:14:59 and if so do certain task.how to go about taking each list item and splitting it into 2 separate times so I can check between them?
Close() Puts Forms Into Crazy Open/Close Loop?
Mar 4, 2011In a program I'm working on, I want a "Loading..." dialog to close when it can't log in to a site using the username and password provided by the user. Basically, I have the code set up right because the function it is supposed to carry out when that occurs does work, but for some reason it ends up in some really weird stuff happening. In the Loading form, I have it set to do "Form1.Show()" and then "Me.Close()", assuming it would simply show the login form and then close the Loading form. However, when this happens, the Loading form closes, and then for only an instant Form1 shows, and then the Loading form shows and Form1 closes. This happens forever until I stop the debugging, and I can't seem to figure out why. Am I using the wrong method? What exactly does Me.Close() do anyways? All I want to do is close the form and open another
View 5 RepliesVS 2008 When Close The Main Form All The Forms Close?
Aug 30, 2009my web browser is my main form and it has a number of sub forms , how can i set it that when i close the main form my sub forms dont close ?
At the moment when i close the main form all the forms close
Forms :: When Me.close() Doesn't Close Form
Mar 2, 2009I have a situation where me.close() doesn't close the form. I have a form with a button with the code seen below. What happens when the button is clicked is the new form shows, but the original form(calling form) is still there. When I go into debug mode, I can see the me.close() execute, but nothing happens (calling form stays open). When I close the second form both forms close. If I comment out the call for the second form to open the first form closes without problem.
Private Sub cmdNext_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdNext.Click
Dim f As New frmOrder3
[Code].....
Forms :: Duplicate A Form Several Times?
Dec 2, 2009I have one form that needs to act as a template for 4 forms, each with its own set of variables.Do I need to set them up like:
Public frmSlot1, frmSlot2, frmSlot3, frmSlot4 As New frmSlotSetup
Or create an array?
Public frmSlot(3) As frmSlotSetup
Forms :: Times Table Program?
Jan 21, 2010Create a simple Times Table program which will allow the user to enter an integer value n (between 1 and 20) into a textbox. On the click of a button output to a label the n times tables. Use a For�Next loop to perform the repetition.
View 2 RepliesMultiple Forms With MenuStrip Can The Same Menu Be Used Several Times?
Aug 15, 2011I have a number of forms which have a common menu strip rather than copy the control onto each additional form is it possible to just call the menu from another form ?
View 3 RepliesVS 2008 Difference Between System.Timers.Timer And System.Windows.Forms.Timer?
Jun 15, 2009I'm wondering what exactly is the difference System.Timers.Timer and System.Windows.Forms.Timer???
View 4 RepliesForms :: Choosing The Amount Of Times A Loop, Or Sub Should Occur
Mar 29, 2009I have made an app that the user has to type a number, and i want the process for the app to do this how evermany times the user wishes it to do.
for example, the app is ment to create a line in a text document, so they write in textbox1 what they want written on the line, and then in textbox2, tey say how many lines they want to create.
So,
TextBox1.Text = "BLAA"
TextBox2.Text = "782"
It will create 782 lines of BLAA. not just one...
Forms :: Make A Button Click Only So Many Times Until It Becomes Disabled
Jan 17, 2010I would like to know how to make a button click only so many times until it becomes disabled.
I would also like to know how to keep what is put in a RichTextBox there, without erasing the other text;
Example: Two buttons, the first puts "1" into the RTB, and the second puts "2" into the RTB. However when I press the second button, it over writes the first value.
How can I prevent this?
You Can Ignore this question below;
Old Question: I am working on a counter, and want to know how to make a button show itself if I hid it.
I have:
CODE:
And would like to know how to make one of the buttons visible again, with one big button.
I know it has something to do with an "If" statement.
Answer: Button#.Show()
Forms :: Make WebBrowser1 Navigate (x) Times On A Particular Website?
Jun 10, 2011WebBrowser1.Navigate("http://" + TextBox2.Text + "/robbery/index/humanhunt/1")
How can i make this code execute the times that TextBox1.Text indicated?It should be some kind of loop. but i want it to repeat this every 100 milliseconds?
Forms :: Node Displayed Multiple Times In Treeview Control?
Apr 2, 2009I'm developing a windows application. I have a form in which there is a list box and a treeview control. My purpose is to fill treeview according to list item clicks. This is done using a pair of subroutines called ReloadPermissions and FillMenuItem:
Private Sub ReloadPermissions()
Dim p As New Permissions
Dim i As Integer
Dim it As TreeNode
Dim el As New List(Of String)
[Code]...
There are only two subroutines in which nodes are added to treeview control, and they are subroutines above. The problem is that whenever list item is clicked, node count displayed in treeview is increased!!! I checked number of nodes before and after call to tvPermissions.Nodes.Clear() using MsgBox. Results show that number of nodes isn't increased (1 before call, 0 after call, again 1 after ReloadPermissions() is called), but what is displayed doesn't show such a behavior! Refreshing window by putting it under other windows or call to tvPermissions.Refresh() has no effect.
Forms :: Press And HOLD A Button Down Not Just Pressing/spamming It Fast 200 Times?
Feb 21, 2009Im kinda new to visual basic, and after a days of googling and searching, i havent got answer for this So, i wanna press and HOLD a button down, not just pressing/spamming it fast 200 times. something like sendkeys.send("{HOLD W}"), not like sendkeys.send("{W 200}")Anyone know answer for this? (Answer to unhold would be nice too :') )
View 1 Replies.net - Close All Forms In Vb?
Oct 19, 2010How can i close all forms I use wpf vb 2010 To load other form i use like Private frm As MainWindow = New MainWindow to open the window i used frm.Show()and to close it i use frm.Close()Now I have two forms like form1 and form2 I want to open form2 when i click on the button - ok it's easy The Question How can i closed form1 from form2 when i open form2 using button when i user Private frm As form1 = New form1 frm.Close() It like a cricle and can't closed
View 2 RepliesClose All Forms But One?
Nov 14, 2009The database application starts from the login form, and if the username and then password are correct, the main form with buttons for other forms opens.One of the buttons is logoff button, which should closes/unloads all the forms open at that time and then opens the login form.[code]...
View 4 RepliesDo Wpf Forms Have A Timer Control
Aug 30, 2009do wpf forms have a timer control?
View 1 RepliesForms :: Using DateTimePicker With Timer?
Feb 16, 2011i'm utilising a couple of controls to kick off a process within my form - in short i have a DateTimePicker, Timer, CheckBox. The user enters the time they wish the process to run in the DateTimePicker (which has its format set to Time), ticks the CheckBox, which kicks off the Timer with an interval of 900ms. The Timer_Tick event checks if the DateTimePicker.Value is now and if so, does something. My problem is that either the DateTimePicker.Value never equals now or that the Timer_Tick event is never actually called.
I welcome any input into better ways of accomplishing this, i am conscious that polling for the time every second is a drain of resources but the only alternative i can see is a service which is overkill
[Code]...
Close All Forms Except For One Form?
Mar 8, 2011how can i close all forms except for one form? vb.net 2003
View 4 RepliesClose Forms And Open Other Ones?
May 20, 2012I want to close form and open another one without termination of the application, when I try to open second form and close first one the application terminate.[code]...
View 2 RepliesClose Forms In Program?
Oct 5, 2006I made a project on vb.net.Im working with multiple forms.Now,from the main form, I activated the 2nd form.then hide the main form. My problem is when I directly close the 2nd form, my project is till running.I closed it trough the "Close Button" of the form.Any way i could interact with that so I could go back to the Main(first) form when i close it there.
View 6 RepliesCompletely Close All Forms?
Jun 4, 2010Is there a command that closes an application completey down, including any hidden forms, etc?
View 3 RepliesHow To Close Forms Properly
Aug 23, 2010I have couple of forms can be opened on the screen but how can close all forms properly when i click the "x" button from the main form?
View 1 RepliesForms - Timer Program Shutdown
Mar 9, 2009Alright im trying to make it where in Visual Basic 2008 you click on a box ether 10, 20, or 30. Then that tells a timer that the program needs to turn off in 10, 20, or 30 minutes. What I basically want it to do is, whenever the set amount time is when it goes off it shows form1(login form). I have prepared a picture can anyone supply me with some information on how to do this?
View 14 RepliesForms :: Controlling A Timer From Outside Class?
Dec 22, 2010We've been asked to make a program based on a spec where we enter some details and it will then output a graph.Part of the assignment asks us to set up a timer so that the bar chart will display each bar seperately with a time delay between each one.However the timer is assigned to a form (Form2) while the draw commands are within another class called Expenditure.
While the specification doesn't specifically say we should stop the timer from within the class it is implied.Now I have tried Form2.Timer1.Stop() and Form2.Timer1.Enabled = False within the class without any luck.I'm wondering is it possible for the Expenditure class to stop the timer or does it need to be done within Form2?
Forms :: Timer - Set For A Specific Time?
Jan 4, 2012I wonder is there a way to set a timer for a specific time interval? Lets say everyday between 23:00 and 23:10.
View 6 RepliesUse One Timer For Controlling Multiple Forms?
Oct 28, 2009I am playing with VB 2008 using .Net 2.0 as the target to compile to and am trying to figure out if it is possible to create multiple countdown timers one in each form using a single timer.I have attemtped but the logic escapes me. If this is not possible I know how to use a timer on one form for that form.
View 1 Replies
