I'm a VB.Net newbie, and would like to write a small app that runs a While loop to check a DNS domain name, and exits once the domain has been registered.
I found code at How to Get Host Name and IP Address in VB.Net - .Net Articles & Samples to resolve the hostname and handle the "No such host is known" error if it still hasn't been registered, but I have a couple of issues:
1. How to make sure the GUI is correctly displayed even though there's an endless While loop? Should I use some kind of asynchronous call so that the window doesn't freeze?
2. I'd like the app to mimize to the icon bar, and have its window title display some status information ("Still waiting/Registered!") so that I can simply move the mouse over it and know whether the domain has finally been registered or not.
I made a game in VB .Net that uses tcp and sends messages back and forth.What is happening is, every so often, the message cannot be sent quickly enough, so then the TCPObj.connect() method goes into a loop, until it reaches the timeout and then spits out an error. Most of the time though, it never gets to the error, my application just freezes, and then comes back after TCPObj.connect() succeeds. How can I make the connect() method do application.doevents while it's trying to connect? Basically, I dont want it to freeze up my whole application. Since tcp.connect() is a .NET method, I can't go in and add application.doevents.
I have an application that does not load a main form. My start up object is Sub Main. I am not using the application framework. I have several classes that handle different parts of the program.
objAlerts is the main one being used for this issue I am having.
This is how they are referenced in the main program class.
CODE:
This is the unfinished objAlert
CODE:
My issue is that the windows (alert.Show) open in a frozen state where the mouse pointer displays the hoursglass and the window does not respond. The windows show in the list of objects no problem.
Is there a special way that I should be opening these? I can open windows on the main class no problem.
I read that <form>.invoke(alert) might work, but there is no invoke on the main class according to VB.
I am thinking this might be a threading issue, but I don't know how to fix it because this is the first program that I have made using a Sub Main instead of a form.
Is there a way to stop or minimize forms and dialogue boxes from freezing? they seem to take up a lot of memory when loading to the point that they some times look transparent for a few seconds.
I have a windows form which to summarize lets the user open a file containing 32 bit hashes, then search for one of them. The hash is then converted to its string representation. The application is giving the results I would expect but I'd like to make it execute faster than it does now; some files can be pretty big > 100 MB.
I'm doing the file read using a BackgroundWorker object to display progress updates and ensure that the UI is available during the process. But for that i need to add a System.Threading.Sleep(1) instruction in the loop; otherwise the application freezes with big files. And System.Threading.Sleep(1) creates a noticeable lag. Any suggestions on how to make searches fast without freezing the UI? Getting speeds comparable to hex editor programs for example.
I'm kind of a newbie in the vb.net world, and I'm experience a strange problem with the toolstrip and showDialog(). I'm developing a aplication that interact with a .COM device, and when it receives a specific signal, a new window pops up.
I'm sure this type of function is simple, but for the life of me, I can't get it.I have 3 forms. Main form holds a list box, which is my shopping cart.FormP holds the print books in a list box.FormA holds the audio books in a list box.I can send the books from forms a & b to the list box cart on main by way of formMain.ListBox.Items.Add(ListBox.SelectedItem.ToString())but I can't access the items once there and associate a cost to throw to subtotal.[code]
For i = 0 To maxrows - 1 For h = 1 To maxrows Me.Controls.Item("TextBox" & h).Text = ds.Tables("TestCriteria").Rows(i).Item(0) Me.Controls.Item("NumericUpDown" & h).Value = ds.Tables("TestCriteria").Rows(i).Item(1)
I am looking for Visual Basic 2010 code that would loop through all the forms in a project, i.e., the equivalent of the following VB 6 code:dim frmFom as Form for each frmForm in Forms
We're using the Autocomplete functionality for some textboxes. We populate the AutoCompleteCustomSource with data from a database query using a datareader loop. The data in the query is sorted by 'recently used', the most recently used entries are at the top.
Let's say the sequence op the AutoCompleteCustomSource is 'AM1900' 'AF2000' 'AD1950'
After typing an 'A' in the textbox, I would expect the Suggested (or Appended) value to be 'AM1900'. The suggested value however is always the first item from an alphabetically sorted AutoCompleteCustomSource list (i.e. 'AD1950')
I am using a for each loop and each time the loop executes, the text of the label has to be changed.. But for some reason, it only changes the text of the label during the last execution of the loop...
Here is the
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click Dim dll
I have a procedure that loops through the directories and subdirectories on a file server and sets the permissions. Procedure is called on a button click on a form.
I need to display on the form which directory is being processed. Similar to if we use the Debug.writeline which writes to the output in Visual Studio. I tried using a ListBox but it only displays the last one and only displays the last one once processing is done. I want to be able to display each directory name as it is being processed.[code]...
I am fairly new to VB but really enjoying programming. I'm looking to create a counter that counts to 25 and loops back around again with a button control and another button control to stop it. So I press a button to start and another to stop and I want it to display the number it stopped on. Is this possible? and how do I do it if it is? I can figure out how to display the label and create a simple counter(that doesn't loop), but I'm unsure on the rest.
I am writing a program in VB 2008 and i need to be able to select different pages. i have a ComboBox with 15 values in it, and based on what value the user selects, that is the Form i want it to go to. for example, if i run the program and select the Value "electrical", then it will take me to the form that corresponds with that selection. [code]...
I have made an app that the user has to type a number, and i want the process for the app to do this how evermany times the user wishes it to do.
for example, the app is ment to create a line in a text document, so they write in textbox1 what they want written on the line, and then in textbox2, tey say how many lines they want to create.
Below is some code I use to loop through rows in a datagridview and set the row colour subject to a "STATUS" field and also changing font colour and boldness dependant on whether a flag has been set to true.
Is this code optimal / can it be cleaned up somewhat? Public Sub ColourMyGrid() Dim varStatus, varBagTemp As Integer Dim myFont As New Font(grdResults.Font, FontStyle.Bold) For Each row As DataGridViewRow In Me.grdResults.Rows varStatus = row.Cells.Item("Status").Value [Code].....
Makes the following statement about the code below:
**"The computer evaluates the loop condition in the Do...Loop statment to determine whether the loop instructions should be processed. In this case, the inputsales <> String.Empty condition compares the contenst of the input sales variable to the String.Empty value. As you know the String.Empty value represents a zero length, or empty, string if the inputsales variable is empty, the loop condition evaluates to True and the computer process the loop instructions. *If on the other hand the inputsales variable is not empty, the loop condition evaluates to false and the computer skips over the loop instructions.
Based on the code I think it is the opposite: ...that while the inputsales value is not empty it should evaluate to true and process the loop and if it is empty it should evaluate to false and skip the loop?
I have a form with many buttons on it and I would like to loop through all the controls in a group control and find out which button is clicked.
I plan to use the click event of the button and I know it's easy to create a click event procedure for all of the buttons but would like to avoid that.
When it comes to threading. I've managed to adapt one of JMcIllhinney's backgroundworker codebank examples to somewhat suit my needs, but not completely. I have a main form, and a second form that appears while I'm running through a for loop. It informs the user what is currently happening. I set up a backgroundworker that allowed me to continue to use the main form during the for loop, but the other "status" form was completely frozen, and any labels or graphics were shown as white boxes. I am struggling to figure out how to be able to move/interact with both forms while the loop is running.
I have made a vb.net application which has 63 forms. On each form label2 should contain the username using the application. The first form displayed to the user is the login form. When the user clicks the login button on this form the user name in all newly opened windows should appear inside label2. How can I do this?
I'm trying to use a loading overlay on top of a Windows form that adds a 50% opaque layer on top of a windows form with a loading GIF, while it does what it needs to do in a background thread. The overlay is a windows form that I'm drawing in the onPaint event.
The loading overlay works fine on multiple different form loads, but fails to work properly when summoned to ensure patience during a 30 second upload process (That Prints a Word Document to PDF, then uploads that PDF to a SQL Server). This upload collects some data from the form, puts it into an Object, then operates entirely on a background thread. The loading overlay will appear, show the first frame loading GIF, then just freeze. The onPaint is getting fired and the image frame is being updated, but it isn't visible
Constructor sets the form to be UserPainted:
Sub New() InitializeComponent() SetStyle(ControlStyles.UserPaint Or ControlStyles.Opaque, True) End Sub
I have a FileSystemWatcher monitoring a folder, and when many files are cut and pasted into the folder, the GUI freezes, as the 'Changed' event is fired over and over. Any way to deal with this?
