Forms :: How To Make Form With Login Level
Aug 13, 2009ok well eh i have a interface where i can login, but i must set the status to tell whether i am student or staff login.
View 1 Repliesok well eh i have a interface where i can login, but i must set the status to tell whether i am student or staff login.
View 1 Replies May i know how to change my below login code to support for multi access level login? So that i can differentiate between manager and normal employees login so that i can enable or disable certain features for different department? I have the below code that can serve as a basic login.
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
'login code can work
conn.Open()[code]......
The problem: A dialog's FormClosing() event is raised if it's a child, ie it's Owner property is set to the parent form, but NOT if it's a child-of-a-child. So closing the main form does not call the closing event on any grandchildren dialogs.
The Details: A dialog prompts to "Save Changes?", with YesNoCancel buttons, in the FormClosing() event. Clicking Cancel keeps the dialog open, ie cancel closing.
Private Sub Dialog_FormClosing(...) Handles Me.FormClosing
If MessageBox.Show("Save Changes?", YesNoCancel) = No Then
e.Cancel = True
[Code].....
Then the FormClosing() event on the child does not raise, if the top-most parent is closed.
Is this a know design limitation in the framework? Is there anything I should consider before I start hacking a nasty solution for this?
For the past couple of days I have been using Visual basic 2008 and learning it.Anyway, I am trying to make a login form that will login to a website with WebBrowser control.and I am noticing that the webbrowser is extremly slow, it takes him about 20 seconds to load a page while mozilla opens it in a moment, why is that?
View 6 RepliesHow do I create a Login Verification routine (Login Form) and make the password case sensitive?Please remember to mark the replies as answers if they help and unmark them if they provide no help.
View 3 RepliesI had a problem with WebBrowser component. Basically, it works improperly when try to log in on one web-site (Forex Trading Social Network | Online Forex Trading Forum and Social Networking Site). I am working with Visual Studio 2010 Professional. I created a simple WebBrowser trying to access the indicated web-site. The problem begins. Well, the website loads, but when you go to the login page (Forex Trading Social Network | Online Forex Trading Forum and Social Networking Site) and try to log in, it doesn't work. I mean, when I enter the login details the login page just refreshes itself and the login wasn't proceed. The same login page appear with every login attempt. The is the current problem!I check with Google, it works. But, it doesn't work with Forex Trading Social Network | Online Forex Trading Forum and Social Networking Site! Why?
View 14 RepliesI am creating an Excel add-in written in VB.NET. I would like to bind KeyDown and KeyUp events to the spreadsheet to record when the user presses and releases the arrow keys while navigating the spreadsheetIdeally, these events would be built into Excel alongside the native SheetActivate and SheetSelectionChange events, for example. Alas, they are not.
View 1 RepliesIn VB.Net 2005 I have a login form where the user enters his username and password on beginning to run the VB app. The login form is called from the Shown event of the form called at StartUp. frmLogin.ShowDialog() frmLogin is set as Fixed3D, and TopMost = True, and the first textbox is TabIndex = 0 and TabStop = True. The cursor evens flashes in the textbox.
However, when another program is running eg. AVG Anti Virus, Word etc., the focus is lost but the frmLogin 'looks' live. When the user types something into the user name box, what they type appears somewhere in the other program not in the frmLogin.
Is there a way of forcing focus back to frmLogin? I tried a timer and Me.BringToFront every 1/10th of a second, but no success.
Otherwise, the user has to find the mouse and click on the frmLogin before trying again.
i wanna design a login form in vb.net with sql server of two user's how is it possible i.e everytime i click on OK button in windows forms it should check the database and allowed only those users else error mesg?
View 1 RepliesIm using 2 forms
How Would i make a login form that will save my data to form 2 like i sign into form1 and it saves like my username/email and password from form1 to form2
[code] this code need to verify the level of login, i mean if the user is admin then proceed to the next form with privileges but if is a visitor then proceed to the next form but without privileges.
View 1 RepliesI've created a windows form application in vb 2010. I've got all my forms complete and now want to add a Login screen. One the login screen, after the username/password is entered and OK is pressed, I try to open the a connection string. Obviously if the connection fails, the user has entered the incorrect credentials. If the credentials are ok, True is returned and I then open up the Main form that shows the correct items for the logged in user.
[Code]...
My background is mostly Access VBA and I am having to learn VB.NET. I am trying to recreate an Access 2007 application I wrote into VB.Net. We are looking at using a hosted SQL Server so we do not have to worry about remote offices or replication. I am using VS 2008 and SS2008.My issue is that I need to create a login form in VB that with look at SQL Server DB and return a dataset record matching the username and password. There are many tutorials on here but do not match what I am looking for.I have a stored procedure with 2 parameters (@prmUser and @prmPassword) named spLogin.I need to call the sp and pass the parameters to SQL Server DB and return the complete row of data that is matched from the button_click event on my form.
In Access, I would have a form that would have the returned data and I would reference that information throughout the application by using the 'forms!frmName!txtValue' to populate forms, reports, and fields that would capture the user that created the record. What is the best practice for this?Next when the login credentials are correct then I need another form to open, which is my MDI form, if not correct then msgbox to try again.
I've made a basic loginform in VS 2005 for anyone to use (Continued from the VS 2003 version), here's the zip file containing the form, feel free to use & modify it freely ... you dont even need to tell me about it How it works:Make an instance of it then you can set the properties UserId, Password, UserIdMaxLength and PasswordMaxLength then just call the the ShowDialog method.I've provided some other ShowDialog signatures that allows those properties to be set with only 1 ShowDialog call..When the Login button is clicked on the window you can retrieve the UserID and Password from their respective properties..This works with the DialogResult object as well so you can easily check to see if the cancel button was clicked or not.[code]
View 3 RepliesI need to include a registration form in my application that allows users to run the program and that otherwise it closes .how can I do to ensure that once registered this form no longer appears?
View 1 RepliesPrivate Sub OK_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles OK.Click
Dim con As New SqlConnection("Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirector y|Database1.mdf;Integrated Security=True;User Instance=True")
[code]....
I have it so a form opens first. But I want
LoginForm1.vb to open first.
How can I do this?
I have taken this code from this forum and what I can see is that when the application is run and enter a username and password, it will compared with the username and password that is exactly the same as the database. What i want is that when the user enter the password, like it prompt out like "invalid password","the password must be not more that 8 characters". So how could I make it? Here is the code that I have used:
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim con As New OleDbConnection("Provider=Microsoft.jet.oledb.4.0;data
[code]......
I want to make a login and register form.
I want to create a database (I have not done that) and People can register a free account. They must write Username / Password and an E-mail.
What should I do to the database ? I need a host ?
I want to make a Login Form that can allow 10 users to login with different user name!!
I have created a Login Form but i don't know how to add an database to store the user profile which come form the another form!
Also ,what I need to type in after I add the database to connect with the Login Form and my form that the user name come from??
i would like to make a site's login form. But from another site attracts ids. I could not.[URL]
View 4 RepliesI have taken this code from this forum and what I can see is that when the application is run and enter a username and password, it will compared with the username and password that is exactly the same as the database. What i want is that when the user enter the password, like it prompt out like "invalid password","the password must be not more that 8 characters". So how could I make it? Here is the code that I have used:
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim con As New OleDbConnection("Provider=Microsoft.jet.oledb.4.0;data
[Code]....
I want to create a log in that allow the user to select different level of access when there using the program. Ok here is how I want it to be the user must select either user or admin, along with typing in there password and username, but I'm a bit confuse in putting the coding together.
View 1 Replieswen i open mdi through the login form, the forms inside the mdi child forms dont seem to execute.
View 2 Repliesi made a serial key a few time and a simple login form but how do i make it so the serial keys or login info only work for one computer and no one else can use unless they get serial key from me.
View 2 Repliesmake a login form connect with a access file?
View 3 RepliesHow To on a database driven login form. I'll include the Administration Backend to go along with it soon. Dial-Up users should not use this thread, it is image heavy
[Code]...
this is my first time making an application so I would like to make a Login form in VB. I haven't gotten into any problems so far but my question to you are the following1) Is it possible for me to make an event/action that will allow it to work with the script that is php? IE: Application has a button that will scan all files in /public_html for viruses, when the button is clicked, it will send the event to cPanel and make it scan all files.2) Once the user has connected and all information has been verified make another window show and the new application will be the new window.Another question I have isRight now I'm using WHMCS(url..) for my billing system they have an intergtation code that I use for my web page and it goes like this
<form method="post" action="http://www.orionconn.com/clients/dologin.php?goto=clientarea"> Email Address: <input type="text" name="username" size="50"><br> Password: <input type="password" name="password" size="20"><br> <input type="submit" value="Login"> </form>
how make username and password form to login into form2
View 11 RepliesHow do I Close a Form and then open a new one straight away? Im trying to make a Login for a Program, but I want the Login Box to open first, then disappear when the credentials are correct and a new Form to load.
View 3 Replies