I was wondering if there is anyway I can get mouse coordinates when I click on a mouse button inside a listbox? I know how to do it in the form but when I click inside a listbox nothing happens.
View 9 RepliesI am new to VB.NET, Now i'm working with Events in VB.NET, I have two event methods, Mouse Click and Mouse Down for a single button in a form, I have displyed a message in each of these methods but only mouse down event is triggered. Why Mouse Click is not triggered? Similiarly I Did the same for Mouse Enter and Mouse Move for a particular button, in this case both the events are triggered.
View 2 RepliesMy mouse has 7 buttons. How to make program that will open notepad when I click mouse button #5?
View 1 RepliesI have an image that the user clicks on and I need to capture the X and Y coordinates of that click. This is what I have but it gives me the x and Y coordinates for wherever the mouse is located.
[Code]....
I would like to ask a question about Getting the Mouse coordinate on the Screen outside the form then Perform a left click or mouse event on the given coordinate what i want to happen is to get the coordinate first then perform click.
i already have the code for performing the click but i dont know how to get a coordinate i will not be putting the code because i want to learn and not copy any already made code.
I am working in VB6. I want to get mouse Coordinates while click on picture box.
View 3 RepliesI need to create a program which can press anywhere on the computer screen. I need to click once with the mouse, and then save those coordinates, and afterwards the program self press the mouse at the point. It needs to be an application - not an applet. I have read something about MouseEvent, but I cannot quite figure it out, how to get those coordinates. Currently I can create a program with presses at some coordinates I self gives values as points in the source, I did that with the Robot class.
View 4 RepliesI am making a game where a car picture box has to follow a mouse. to start the game you click the car but when i click the car the car moves down away from the cursor. then it starts following the cursor but is still about 2 cm below the cursor and a little to the side.
[code]...
Im new to the forum and planning to stay here to learn more on programming. I would like to ask a question about Getting the Mouse coordinate on the Screen outside the form then Perform a left click or mouse event on the given coordinate what i want to happen is to get the coordinate first then perform click. i already have the code for performing the click but i dont know how to get a coordinate i will not be putting the code because i want to learn and not copy any already made code.
View 8 RepliesI'm making a map engine for another game I'm working on.... I would like to make my mouse cursor be a 32X32 pixel rectangle. This would make it easier to place my tiles which are all 32x32.
View 4 RepliesI have found on the Internet a few pieces of code whitch should do automatic mouse click on coordinates I provide by code, I use mouse_event, what I want to do is to send many mouse clicks to another application, with mouse_event it works but it moves the mouse (and I don't want that cause I need the mouse at my disposal)
I've tried sendmessage, postmessage and sendinput but this two functions do the clicks only on objects and the application doesn't have any object at that location, for example if the application receives a mouse click at 100,100 at displays a number. I am using vb 2010 trial
How do I simulate mouse click on webbrowser control based on coordinates (x, y).Coordinates of the webbrowser control. I wanna click a specific location on the webbrowser.
View 5 RepliesI have two custom action listers. One that handles Mouse.Click and one that handles Mouse.MouseDown. My question to you is, can I delay the mouse down event so that it does not intefere with the code of the Mouse.Click event? I have tried adding a timer and waiting x amount then setting a bool value to true, but the code executes to fast and it skips the other code.
View 6 RepliesIn a game i am making, as the mouse cursor i have crosshairs (like those in FPS games) and i would like an image box to change images as the mouse moves so that it appears that the character in the picturebox is following the mouse cursor.
i thought i would do something along the lines of first finding out which side of the picture box its on (left or right) then finding out exactly where with some maths equations and then assigning 1 of 60 pictures so that it appears that the picture is rotating.
-User is able to pick coordinates off his/her own screen with a right-click
-User can then add those coordinates to a list in any order they wish
-Up to 3 different lists are available
What I want it to do:
-User is able to pick coordinates off his/her own screen with a right-click
-User can then add those coordinates to a list in any order they wish
-Up to 3 different lists are available
-Mouse will go to coordinates specified in list boxes and click each coordinate
-The time in between each mouse movement/click can be adjusted by the "time between
[Code]...
I am using VB 2008 Express. I am creating minesweeper game with picture boxes. I want a box in the grid to glow & I have created Different images form that. I want that whenever we hover over the box , it glows & I have used the visible property. I have set the property as false of all the glow boxes.
[Code]...
I would like to emulate multiple mouse inside of mouse mischief using vb.net 2010.My goal is this:1. get mouse devices to show pointers in mouse mischief and move them.2. get the pointers to left click in mouse mischief.I want the emulation for my kinect multipoint project which is located here:i have figured out how to create an emulated mouse device using dsf and send data (i hope) to the emulated mouse in it but confused as to if the input reports worked and checking to see if my emulated device
View 1 RepliesI have a problem with a purchased UI control, and to do a quick and dirty fix (no time to build/order a new control), I need to emulate a click at the right side, say 10 pixels into the control, from the right side of the control. Is that possible in vb.net? We can't do this functionality programmatically, due to a bad API design. And now time is running low.
Which method do I use to get the coordinate to perform the click at, and what code do I use to do the actual click? The code should move mousepointer to the location, do a right click and then return to where it was, hopefully without the user ever noticing anyting.
Apologies as this has probably been answered a million different times a million different ways already. I'm trying to control the mouse. I wish to move the mouse to a given pixel position (x, y) and cause a click. I don't want this to be limited within a form, as I want to control another application. I'm using VB 2005.
View 4 RepliesI have created a game in VB.net 2005 that is very much like Sudoku. When the user clicks a button its number content increases by 1, when the user clicks the check button it gives them an error if incorrect, win if not. I need that same check button to apply the next action. I need to undo the last button click by the user when check is clicked. I know I need to build a container or something to record the button clicks and somehow draw on that when needed. hat I am even looking for, an 'undo' search returns nothing close to what I need.
View 7 RepliesIm using Visual Basic 2008 Express..Is there a way to disable mouse click for a while in Visual Basic 2008, I mean if mouse was clicked more than 1 time in very short time to click only once? -- I need it because my mouse became like crazy one.. when I click once it may clicks twice or more.so until I buy another one, I'd like to filter click, to allow only one click and to block another clicks that were made in last second.
View 1 RepliesI am trying to simulate a mouse click on a webBrowser at certain coords in the webBrowser WITHOUT using the persons mouse in any shape or form becuase I want to be able to run the program, minimize it and do other things whilst the program clicks in certain coords in a webBrowser.
View 35 RepliesThis is the code I am working with...
[Code]...
I've been working on a GUI in WPF which I'm fairly new to, having only used Windows Forms up until now. So far, my GUI is very simple: it contains two rectangles, each of which drops a shadow. The shadow creates an effect of rectangles "floating above the canvas" so to speak.
When one of the rectangles is pressed, the myRectangle.MouseDown event is handled such that the shadow goes away, thus creating an effect of the rectangle being pressed down onto the canvas, like a button.Similarly, when mouse button is released, the myRectangle.MouseDown event is handled such that the shadow reappears and the rectangle "floats" again. This behavior make them resemble buttons. Note, there a reasons I want them to be rectangles and not custom buttons.
[Code]...
If the pointer leaves a rectangle while mouse button is pressed, I'd like shadow to reappear. This is arguable simple, because theoretically in this case, any time myRectangle.MouseLeave is raised, the shadow should come back on, even if it was already there.If the pointer left a rectangle when mouse button was pressed, then came back while before the button was released, I want the shadow to disappear again. This one is what gives me problems. No idea how to do this.
I'm currently debugging a form that sets a flag when the mouse button is pressed, then clears the flag when the mouse button is released. As long as the mouse button is pressed, the user can move the mouse around and a few things happen depending on where they move. One of the things that happens is that a timer starts, or stops, and a few things change color depending on the mouse position. The timer starts when it should, then stops when it should, but once stopped, it is not re-starting when it should. I can verify that MouseMove events are getting through, because coloring changes as I move the mouse, as it should. This would be a simple thing to debug...except that it requires the darn mouse button to be down, and it uses the mouse move event. Anybody who has put a breakpoint in a mouse move event handler knows the issue: There are THOUSANDS of them. Worse yet, since the mouse button is necessary for switching to the IDE, as well as setting a breakpoint (technically, a keyboard shortcut could do this if I could shift focus), I can't wait for the problem to happen, then switch to the IDE and set a breakpoint to see what is happening then.Does anybody have any tips or techniques for debugging in mouse move events when the mouse button is down and has to stay that way? As it is, I'm going to have to write some funky code into the method just so that I have a place to get a breakpoint when I need it without breaking on every one of the mouse move events.
View 7 Repliesoption:
If MouseButtons = Windows.Forms.MouseButtons.Left Then
MsgBox("Left Click")
[code].....
'SimulateClick2 = SimulateClick2(hwnd, BM_CLICK) '(works)
the following doesn't work
SimulateClick2 = SimulateClick2(hwnd, MOUSEEVENTF_LEFTDOWN)
SimulateClick2 = SimulateClick2(hwnd, MOUSEEVENTF_LEFTUP)
I have defined a class which inherits PictureBox-component.In this class I have a mouseClick and mouseDoubleClick events overridden.On mouseClick the image is selected. Now if user click it again, it is delesected.The mouseDoubleClick event starts the video which this picture is pointing to.Now the problem is that when user doubleclicks the pictureBox it actually calls the mouseClick-event twice (select-deselect) and does not call the mouseDoubleClick-event. How can I define it so that if mouseclicks are done as doubleclicks then doubleClick-event is called, not the click event twice?
View 2 Repliesi got a form with 10 button and i want to get the button name of the mouse click in a string variable
i tried this:
private void Button_Click(object sender, RoutedEventArgs e)
{
[code].....
Is there a way to disable a left mouse click in a listbox without disabling the list box ?
View 6 Replies