Get Parameter Values With ScriptControl And ParameterInfo
Apr 18, 2010I've almost accomplished getting method parameter name and values. [code] I'm using using vb.net 2005 /Vista/Microsoft Script Control 1.0
View 1 Replies
ADVERTISEMENT
A Procedure With A Single Parameter But The Input Values For That Parameter Are More Than One?
Oct 26, 2011Is it possible to make a procedure have a single parameter but the values for that parameter are more than one? I have this procedure:
Public Sub autoComplete(ByVal cboCombo As ComboBox)
With cboCombo
.AutoCompleteMode = AutoCompleteMode.Append[code]....
Now I was wondering if there is a way to use it like this:
autoComplete(myCombobox1, myCombobox2, myCombobox3)
Or can I use a procedure like this with 'With...End With'?
Setting Parameter Values To Equal DataColumn Values?
Apr 23, 2011I'm trying to assign some parameters for a stored procedure with some values that are stored in a data table. in the code, I can set the parameter values to the data table, and give a column header or index without issue, but when it tries to execute at runtime it bombs out.the error I get is a variation on "Failed to Convert Parameter Value from a DataColumn to a String" depending on exactly how I try to assign the value.the data types are all correct elsewhere in the code.
my code for this bit is
Try
ConnectionAttempt.Open()
Try
With NewYearCommand_Dates
[code]....
other things I've tried to get this to work are all variations on the .Value=dates bit, such as
.Value=dates(0) (so using column index)
.Value=dates.columns(0) (again using column index)
I've also tried declaring variables, and setting their values to the values in the columns, but the code returns an error saying that "Value of type 'System.Data.DataColumn' cannot be converted to string".I should point out that i'm doing this for 3 tables at once in this sub, 2 of them will only have a single row of data, but the third has an indeterminate number of rows.I'm afraid I don't know what else to do. I'm lead to believe by my mate and my lecturer that this should work, and of course it will work, but the evidence says otherwise.
Calling A COM Object (MSScriptControl.ScriptControl) From .Net?
Oct 24, 2011I am currently trying to maintain a VB6 module that it is being called from a vbscript. The module needs to have a reference to the MSScriptControl.ScriptControl COM object. However, I obtain a 80040154 error. I went ahead and registered the component using the C;WindowsSysWOW64Regsvr32.exe but then I get that the entry-point DllRegister was not found.
View 3 RepliesAccessing Parameter Values From ODS?
Sep 21, 2011accessing values using ODS. i have no idea how to make this work.
im using ASP.NET VB code.
Imports Microsoft.VisualBasic.FileIO
Imports IP2V2.DataAccess
Public Class LotIDParameterDAL
[Code]....
Enter Parameter Values Dialogue Box- Re-size?
Jul 17, 2009I am working with Vb.net 2005. I have used Crystal reports in some forms. The Crystal Report on the other hand use parameter field, therefore when you run the application an "enter parameter dialogue box" is loaded.
View 5 RepliesPass Values To A Parameter In A Rdcl File?
Nov 15, 2011I have a RDCL Report called Report1.RDCL.In this report I put an image box named logo the select image Source is set to EXTERNAL and in the use this image I have Parameters!LogoPath.Value.
View 2 RepliesPopulated With Certain Values Of A Parameter From Mssql Database?
Oct 1, 2010I have a question on a datagrid object in vb.net 2008, that I what to be populated with certain values of a parameter from mssql database. The connection is made, the column header are loaded, but I what, when the form is loaded, to populate the datagrid only with certain values, doing a select commnad where id has a value given by me.What is the command to have this select done and display the values in the datagrid?
View 3 RepliesSending Parameter Values To A Stored Procedure With Sqlreader?
Oct 1, 2009I would like to pass to values to a stored procedure. I am using a sqlreader to populate a excel sheet. I need the user to be able to select a range, rather that the whole table.
Dim strSQL As String = "sp_im_select_customerdtl"
Dim data As String = ""
sqlCon.Open()
[Code].....
Specified Argument Was Out Of The Range Of Valid Values. Parameter Name: Index
May 15, 2009i'm trying to do a filename compare, sort of fuzzy match.Here's what code i have.First of all i load 2 directory's into 2 listbox's as strings and remove the filepath. Directory1
Code:
TextBox1.Text = FolderBrowserDialog1.SelectedPath
If TextBox1.Text = "" Then
Else
Then when i click the compare button i am trying to pass listbox1 and listbox2 through Distance and return the resulting fuzzy file matches.
Code:
Dim MyObject As New StringSift2
Dim ReturnVal As Single
ReturnVal = MyObject.Distance(ListBox1.SelectedItem, ListBox2.SelectedItem)
[code]....
But i get this error.
Code:
TreeView1.Nodes(lb1).Nodes.Add(ReturnVal.ToString())Specified argument was out of the range of valid values. Parameter name: index
VS 2010 Passing Values To A Parameter In A Rdcl File?
Nov 14, 2011In this report I put an image box named logo the select image Source is set to EXTERNAL and in the use this image I have Parameters!LogoPath.Value.I would like the users to be able to pick their own logo.
View 1 RepliesPassing Multiple Values In Crystal Report Parameter Field?
Jun 22, 2010passing multiple values in a parameter field in crystal report viewer, I already set it to allow multiple values. When the code below executed it only displays the last record and not all of the records that appeared. here's my codereally need this one! Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As
System.EventArgs) Handles Button1.Click
dt = New DataTable
sda = New SqlDataAdapter("SELECT * FROM KEMPMASTER", sqlcon)
[code].....
VS 2005 - Save Records To My Database As Long As All The Parameter Have Values?
Jun 23, 2011My code below will save records to my database as long as all the parameter have values. One of the parameter is @MI (middle initial), however, there are times that student have no middle initial so when I click my button I get error. I want to still save the record even if one of the parameter value is missing.
[code]...
Active-X Error CreateObject("ScriptControl")?
Jul 2, 2010I have a Visual Basic application using Createobject("ScriptControl") to convert a user input like 3+3 to 6. This worked perfect under Windows XP and even Windows 7 but on my new Windows 2008 Server (64 bit) it gives an error: Cannot Create ActiveX component. Should I register or refer anywhere ? Should I install anything ?
Dim SControl = CreateObject("ScriptControl")
SControl.language = "VBScript"
Totalfee = SControl.eval(TotalfeeTextBox.Text)
[code].....
.net - Refresh Crystal Reports Without "Parameter Values" Dialog
Mar 20, 2009I am running Crystal Reports Basic for Visual Studio 2008.
I would like to dynamically refresh my report based on a parameter.
For instance, I'll have a customer contract and I want to switch between customers based on a VB.NET winform button click.
I was expecting the code below to work, but I keep getting the "Enter Parameter Values" dialog box, why isn't it using the parameter value that I just set it?
CustomerReport1.SetParameterValue("CustomerID", txtCustID.Text)
CrystalReportViewer1.RefreshReport()
Ado.net - Execute A Stored Function In Oracle Or Sql - Adding The Parameter Values Of The Function
Dec 13, 2011I need to execute a stored function in oracle or sql through vb.net. I created a command object. Depending on the database type(oracle or SQL) i am preparing the Command text as Select functionName(?,?,?,?,?,?,?,?) from dual; (For Oracle) Adding the parameter values of the function. Now performing the ExecuteScalar which is not working saying invalid parameter. This works with ODBC connection string. But ODBC doesn't with 64bit. My Requirement: Code should execute a user defined stored procedure by taking the values at runtime.
View 1 RepliesCrystal Reports- Export Report Causing "Missing Parameter Values"?
Feb 15, 2012I am trying to export a report but everytime it runs the code to export the crystal report in the crystalreportviewer I get an error message saying "Missing Parameter Values". I've looked through many sources but havent found a solution. I do know that all parameters are filled in because without the export code, the site runs perfectly fine.
Export code
Try
Dim CrExportOptions As CrystalDecisions.Shared.ExportOptions
[code].....
.net - A Parameter Is Missing [ Parameter Ordinal = 1 ] Error In Pocket PC Application
Apr 21, 2011Following code doesnt work and raise error "A parameter is missing. [ Parameter ordinal = 1 ]".What s wrong with it?I am developing pocket pc application in vs 2008 and sqlce 3.5 sp1.
[code]....
Call The Stored Procedure Which Has One Input Parameter And One Output Parameter?
Mar 21, 2009I'm Trying to Call the Stored Procedure which has one input Parameter and one output parameter . VB.net code is below
[Code].....
VS 2008 Template Function That Can Receive Different Parameter And A Type Parameter
Mar 9, 2011I want to have a "template" function that can receive different parameter and a type parameter, like:[code]But Vb told me that tupeList is not defined... is there a way I can do that?
View 2 RepliesAddressOf With Parameter - Method Which Requires A Parameter To Be Passed In
Mar 1, 2009I have a method which requires a parameter to be passed in. I would like to use the Addhandler to call the method through a dynamically created button control's click event.
When I include () in the AddressOf, VS complains: 'AddressOf' operand must be the name of a method (without parentheses).
When I exclude the brackets, VS complains: Method '...' does not have a signature compatible with delegate...
My code:
CODE:
ToolTips, Parameter Options, And Parameter Groups For New Code?
Dec 10, 2008One of the things that I think is really cool about VB.NET is how built-in functions and subs have extra help text in their ToolTips like "Expression: String expression to search for replace string." as well as the usual "Replace(...parameters...) as string" text. So are the pop up boxes with things like "CompareMethod.Binary" or "CompareMethod.Text." And finally I like how some functions and subs have different sets of parameters for the same routine. For example, New FileStream() starts with either a path (string) parameter or handle parameter, but none of the 15 sets of parameters contain both path and handle parameters. Is there a way that I can set up the classes and functions I write to use these things or do they only work with built in classes and functions? If there is a way, what are the proper names for them so I can look them up in the VS/VB documentation? I would be happy enough if someone would give me an example of them, but it would be nicer if I could go through the documentation and find out if there are other cool things that are related or near by.
View 3 RepliesArgument Not Specified For Parameter '<parameter>' Of 'Public Sub New?
Apr 26, 2009have an idea on what i am doing wrong here:
Compiler Error Message: BC30455: Argument not specified for parameter 'dteRDate' of 'Public Sub New(strOName As String, strOAdd As String, intOPhone As Integer, strVer As String, dteRDate As Date, dteWDate As Date, strONote As String, strOrName As
[code].....
Call Storedprocecure With Parameter(0), Parameter(1) Etc?
Jul 16, 2010I have a vbscript that runs under asp page. I need convert the code to VB.NET
SET objCommand = Server.CreateObject("ADODB.Command")
objCommand.ActiveConnection = Application(DB)
With objCommand
[code]....
What is the VB.Net that will do exactly the vbscript does? I like paramer(0) and 1 and 2 etc since I don't need to define the parameter(0) as integer or varchar etc. I remembered I have discuss this before and it is possible to do in VB.NET?
Error "The Parameter 'address' Cannot Be An Empty String. Parameter Name: Address"
Jan 30, 2010where i put the *'s i get the error "The parameter 'address' cannot be an empty string. Parameter name: address".
Private Sub Timer2_Tick(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Timer2.Tick
Dim mail As New MailMessage()
Dim SmtpServer As New SmtpClient
[code].....
Read The Latitude And Longitude Byte Values From The DEM File (retrieving Binary Values)?
Mar 23, 2009I have a DEM file(Digital Elevattion Model File) and I am trying to open the file,where we have Latitude and Longitude values inside the DEM file.And, Now I have opened the file using Filestream and Read the file using BinaryReader.But, I am having a trobule in getting the values of Latitude and Longitude.I am getting Byte values randomly as 1,202,31,271 etc.But, we dont have latitude and longitude values more than 180,and also I am not getting 16 bit UInt values.For example, the values should be like Latitude 20.00416666666667 and Longitude 39.99583333333333.So,read the correct Byte values of the DEM file.The code I have used till now is:
Dim fs As FileStream = New FileStream("C:UsersadminDesktopHeader and DEM fileE020N40.DEM", FileMode.Open, FileAccess.Read)
Dim rd As New BinaryReader(fs)
Dim convertDB As UInt16
For i = 0 To rd.BaseStream.Length
[code]....
(VB2010) Save The Values To A File Which Loads The Values In The Specified Labels On Startup?
Jun 2, 2011lets say I have a form (form1) with lables a-z which are all designed with default text "0". So they all show 0 on program startup. which is fine. I also have a dialog with 2 TextBoxes; I want my program to update the default text/value on (only)form1 labels x, y and z to whatever was put into the textboxes when i press the OK button on the Dialog, so these specified labels show the 'new' value on next startup. Is it even possible or should I save the values to a file which loads the values in the specified labels on startup?
View 5 RepliesExclude Multiple Values In Sum Depending On Values In 2 Columns In SSRS 2005?
Apr 21, 2009I have simple columns and their respective sums. However, I exclude 1 particular value from each sum, like so [code]...
Now I need to exclude another value ("Awaiting Progression") from a second column called "PROGRESSION".
Since I already exclude value based on 1 column called CATEGORY, how do I change my =Sum(Code.ExcludeOthers(Fields!CATEGORY.Value,Fields!ACTION_PLAN_NEW.Value)) to exclude a value from the PROGRESSION column if it's = ("Awaiting Progression") ?
i.e. How do I exclude multiple values, depending on values in 2 columns in SSRS 2005?
See If The Values A User Inputs Into 2 Textboxs Equals The Values Assigned To A Picture?
Apr 21, 2010I want to be able to see if the values a user inputs into 2 textboxs equals the values assigned to a picture. I put these values in the picture's name and tag. Also the picturebox is getting the image from a random function correlating to an imagelist. How would i go about thisI thought of maybe using a checkbox and coding
If picturebox1.image.tag = ("12") _
and textbox1.text = 1 _
and textbox2.text = 2 Then
checkbox1.checked = true
unfortunatly when i debug it says the picturebox1.image.tag = Nothing
Adding A Column And Values To It On The Basis Of Some Existing Colum Values?
Jan 4, 2011i have retrived this datatable from datasource and i want to add a more colum 'category'basedon the each value of each Role, like if role column has the value '90 daya client' then in the same row it should have a value 'DC' in the category column.n make a temporatry dt1 table but to add related values.
S.No First Name Last Name Role Date
1 Us er1Name User1Name 90 Day Client 11/01/2011
2 User1NameAtt1 User1NameAtt1 90 Day Client 11/01/2011
[code].....