Getting A Cancelled Postback That's Causing A Page Load Error
Sep 23, 2011
when I clicked the send button it would work, but if you tried to hit enter it would just do a postback to the same page. Yesterday I thought I finally got it so it would work on chrome (it has been working just fine on firefox, but breaking on chrome/safari and it is an app for the iphone). But, even though I finally got it so it would change pages, it is now displaying an error. I narrowed down the cause to a postback that is being called right before the postback I want is being sent which is then cancelled. I assume the cancelled postback is blank because the problem I was having was the page would do a blank postback.[code]
View 2 Replies
ADVERTISEMENT
Oct 13, 2010
I am trying to develop a web application to populate data to three datagrids(datagrid control) using 2003 version, each datagrid has three columns and about 10,000 rows. The problem I got is it only allow load data once, whenever I changed the setting and reloaded data, the Page Can Not Be Displayed error will popout. I tried to remove one or two datagrids, it would allow populate data few more times, eventually will error out.
View 1 Replies
Jan 31, 2011
I have read through many of the questions related to my situation but I have not found one that does. I currently have a repeater with 4 bound items to it, clicking on a button in the repeater causes my error, below is the markup and codebehind. Can someone explain to me why this is happening and the fix for it? (I have excluded the page decleration and just included the page_load event. let me know if i should cut and past full code in)
[Code]...
View 1 Replies
Jan 5, 2010
I am facing another error "An error occurred trying to load the page. Member not found. (Exception from HRESULT: 0x80020003 (DISP_E_MEMBERNOTFOUND) )" performing the following scenario:- Opened a sample VS 2010 WPF project that I receiveved from a co-worker (Project compiles, and run on his machine)I tried to open project properties (Project --> Properties)The project properties panel/window didn't open, all it had was an error symbol (red/white X) and the error message above(HRESULT: 0x80020003).I am unable to view niether the designer window nor the code window (no messages are reported) but the pane where the code/design shoud display is empty, all you can see is the background color.
View 1 Replies
Feb 21, 2009
After I "Publish" the project (I'm assuming this is the same as "deploying" it?) I get a "page load error" on [url]...publish which was just created. Is there something that should be displayed?
View 1 Replies
Feb 18, 2009
I've got a handful of dynamic controls populating an ASP page, with VB.NET in the back-end.What I need is when the user changes the .TEXT value of a textbox and the page posts back, the .TEXT value of a Table Cell changes to reflect that change (it multiplies the value of the textbox by the value of another cell).But a Table Cell can't be set to AutoPostBack, and I can't for the life of me figure out how to programmatically refresh the page (force a postback) in the TextChanged event for the textbox.
View 1 Replies
Aug 8, 2011
I have a page with three radio buttons and a calendar usercontrol. The radio buttons have autopostback and depending on which one you click it should change the calendar availabilities based on the selected index.The problem is that the page load of the calendar is executing first before the selected index change (where I am setting the needed id).
View 1 Replies
Nov 30, 2011
I have a windows application written in VB.Net 2008, framework 3.5. This app is running on 2 remote desktop servers. I have one user who receives error, This operation has been canceled due to restrictions in effect on this computer. when entering in a text box. When he uses the application on Server 1 he does not receive the error. It only happens to this 1 user on one server.
View 10 Replies
Apr 8, 2011
I have a FormView bound to a SqlDataSource on my page. One of the controls on the FormView is a DropDownList, which gets populated on Page_Load (it's being populated with a list of file names from a specific folder).
Everything goes well when the page first loads. I am able to view the list of files, select one and, upon hitting the "save" button, store the correct filename in the database. However, when the page refreshes after the post back - the DropDownList is empty.
[Code]...
View 1 Replies
Jul 5, 2010
I have a form with a update panel. This posts the form and validates it. Returning a errorMessage string of any invalid field such as "Field xyz is a required field, Field abc needs to be a quantity" When I enter incorrect date it posts back fine and displays the text in a div at the bottom of the page which the update panel is aimed at to update. (and only this it should be changing)This works but the second time I hit say (say i enter invalid data twice) the Complete form will disappear leaving me with just the banner of the site and the error message that is returned.
View 2 Replies
Apr 13, 2012
I am working with adding up user's scores based on their checks in a CheckBoxList. Every time a user checks a box, a value, X, is added to the overall score. When a user unchecks a box, a value, X, is subtracted from the overall score. No problems here.
The problem that I am having is that using the AutoPostback option in the CheckBoxList properties forces the page to load back to the top instead of staying where the user was situated, which means that they have to keep scrolling down after each check/uncheck. Is there a way to prevent this?
View 1 Replies
Oct 26, 2011
How to I redirect to another page *after* printing document? Things seemed to be working fine until this morning we discussed that users were submitting duplicate entries.The reason for this is that once the user clicks to Submit their request,they are presented with a button that says, ">>>Click Here To Print Form<<<<".
Users are required to print this form but for some reason, they forget to do so.In the event that they forget to print this form, they are taking back to the input screen with boxes still retaining the data they initially entered.Is there a way to redirec them to results.aspx page, whether they print the form or not?
<script type ="text/javascript">
function doPrint() {
var printContent = document.getElementById("pdmyop");[code].....
View 1 Replies
Mar 9, 2010
I have a aspx page, in that page i have an Iframe. In the Iframe i do some stuff in code behind and when it is done I would like to do a postback from the aspx. In other words, Is it possible to do a postback programatically from the code behind of the iframe to the parent page?
View 4 Replies
May 15, 2012
I have a form with:
[Code]...
Whenever I change the value of MyTextBox and press MySubmitButton, the select method of MyObjectDataSource is invoked and everything works OK. But if I change the value of any of my check boxes (without changing the value of MyTextBox) and press MySubmitButton, the select method is not invoked, thus the "MyObjectDataSource_Selecting" event doesn't take place and I get the same results as before.
One way I found to work around this was to explicitly invoke MyGridView.DataBind method whenever MySubmitButton was clicked. Is this the best way to handle these type of parameters? What I am afraid is that this may cause the select method to be called twice making the page slower.
View 1 Replies
Apr 2, 2009
This code makes the the download dialogue open for the file I want downloaded .
Response.ContentType = "application/octet-stream"
Response.AppendHeader("Content-Disposition", "attachment; filename=" & FileName)
Response.TransmitFile(Server.MapPath("~/Admin/EmailLists/" & FileName))
Response.End()
After the download dialogue opens I need a series of changes to happen on the page, but I have noticed all the code after this code will not run. Anyone know how I can make the page changes occur AND get the download dialogue to pop up?
View 1 Replies
Jun 13, 2011
How can I get Webbrowser1 to navigate to each page and wait for the one page to completely load, then move to the next page...? [code]
View 3 Replies
Oct 20, 2011
When an UpdatePanel Calls a method in server and for example this method change textBox1.Text = "12312"
and this textBox1 was out of updatePanle scope it dosn't change it text till a postback happend to the page
so I need after that calculation and chaging the Textbox's text in the server, I need to forcepage to do postback
View 1 Replies
Dec 29, 2009
How can I check the 'Checked' property of a dynamically-created checkbox during the Page_Load subroutine? Basically, I have a VB.NET page that creates some table rows dynamically, based on a number selected by the user. So, for example, if the user selects "3" from a dropdown list, the page posts back and creates three table rows. Each row contains a couple of textboxes, a dropdown list, and a checkbox (which are all .NET form controls rather than plain HTML controls, I should point out).Typically, the user would enter a few details into the form controls, and click the 'Submit' button, after which the page iterates through each row, and inserts the data into a SQL Server table.But if the user ticks the checkbox for that row, this signifies that the page is to ignore that row, and NOT insert that row of data into the database when the user clicks 'Submit'. This works well, but there is a problem. If the user clicks 'Submit' and some of the values entered into the form controls are invalid (so, for example, the user didn't enter their name) then the page won't submit the data, and instead, shows an error to the user informing them of the values they need to change. But if the user creates three rows, for example, but decides to "ignore" the third row (by ticking the checkbox) then when the page posts back, finds some invalid entries, and re-shows the form to the user to allow them to correct any errors, I'd rather the page didn't render the third row altogether. After all, they chose to create three rows originally, but then decided that they only needed two. So it makes sense that the third row is not recreated.
But what seemed to happen was that objCheckbox.Checked was always returning False, even when the checkbox was ticked. Once the page had loaded, the table rows had rendered again, and the tick was present in the checkbox, so it's not like the value was lost on postback. But at the point I check whether the checkbox is ticked, it always returns False, rendering a table row that the user doesn't need.Does anyone know how to get round this problem? I've read lots of articles about the .NET ViewState, and the page lifecycle, but I've yet to find a solution that works. I simply need to be able to check if a checkbox is ticked before re-creating some dynamic controls. [code] But then I basically found out that you can't override a protected member with a public one.
View 1 Replies
Jul 3, 2006
Does anyone know why a Page_Load would be called twice on a page when requesting an aspx page?I am using .Net 2.0 with the new .net 1.1 compilation model installed. Whenever I request a page, the Page_Load on the aspx page appears to be called twice, so does the Page_Load on and user controls added to that page.
View 16 Replies
May 7, 2009
I have an asp.net website that is using update panels on the page that i cant get to reload from the server. I have this for the disable page cache on the master page.
'Response.Cache.SetExpires(DateTime.UtcNow.AddDays(-1))
'Response.Cache.SetValidUntilExpires(False)
'Response.Cache.SetRevalidation(HttpCacheRevalidation.AllCaches)
'Response.Cache.SetCacheability(HttpCacheability.NoCache)
'Response.Cache.SetNoStore()
When I click the browser back button to go back to the page it says the page has expired. the other pages on my web site work and call the page load, the only solution i found but cant use is to wrp the whole page in an update panel, but i cant do this becuase i have a report viewer on the page that does not work with ajax.
View 1 Replies
Jan 5, 2011
I have a page to which i send some variables with the GET method. In my VB back-end i get those variables using Page.Request.QueryString("<name>")If i then use the IsNumeric method to make shure it is an numeric string i get True back as value.
When i then try to transform the string to an Integer using val, cìnt, Integer.Parse or cType I get an error saying that my string could not be converted to a integer.So i made an error page which gives me all the info i need to deal with the problem (view below) Exception Message: Conversion from string "" to type 'Integer' is not valid.
[Code]...
IsNumeric confirms that it is a numeric string and that it should be convertable to an Integer. So why won't it work. I don't think that my code should provide any extra information because it only gets the querystrings, uses IsNumeric and then tries to convert them.
View 7 Replies
Apr 29, 2009
I want to show default page in fckeditor on page load but but I am not able to this.[code]...
View 1 Replies
Jun 22, 2010
I have a page that add Items to RadioButtonList with this code :
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs)
RD.Read()
RBQ1.Items.Add(RD.GetString(3))
[code]....
When I click in any button in the same page, the entire page reload and it display 8 items in the RadioButtonList, If I click for the second time I get 12 items in the RBL...How can I prevent the page to reload if I click in this button. ?
View 2 Replies
May 21, 2012
I am using <%@ MasterType virtualpath="~/__.Master" %> to embed my master page content into child page to access control belong to Master Page. I have one DropDownList in Master page. And I want to access its SelectedValue in my Child Page.
Problem is when page first time loads and as I am trying to access DropDownList's Selected Value by writing in child Page - "Master.DropDownList.SelectedValue". I am not able to get DropDownList's Value. Its display's Blank.
But When Page.IsPostBack I am able to get SelectedValue of that DropDownList.
View 1 Replies
Oct 11, 2011
I am currently programming a complicated inheritance structure for an Insurance Application. One DLL has classes that can be used and inherited from. DLL Two has Classes specific for our Auto Line of business, however when i attempt to use Object 2 from a Web Application it errors out because one of the classes is ambiguous because it appears that DLL Two inherits a class from DLL One which appears to pull in the entire inherited class. Since the Web app has a reference to both DLL One and Two, One has the class, Two seems to also have it and so compilation errors out with an ambiguous class in the same namespace.
To attempt to get more specific ill try a quick run down.DLL One - PGPolicy.dll contains standard classes with properties and methods needed for every line of business such as:
Policy, Name, NamedInsured, Unit
DLL Two - PGPolicyAuto.dll contains the following Auto specific classes:
Vehicle Inherits from Unit
Driver Inherits from Name
Since PGPolicy.dll contains classes needed by all lines of business and PGPolicyAuto.dll has more specific classes for the Auto line of business, the web application references both of them. The problem is that since Driver inherits the Name class, it appears to create a Name class in the same name space that the PGPolicy.dll has the namespace in, which gives me an Ambiguous class "Name" in the PG.Policy Namespace.
View 10 Replies
May 4, 2010
What I'm trying to do is build 16 forms dynamically at runtime (all will be identical). These 16 forms each will display a camera, which is using an ActiveX control made by a 3rd party. I am able to create the forms correctly and provide all necessary parameters for each control, but since I have to declare my own AddHandler event which checks if the camera connected, I need to somehow reference the ActiveX control at runtime, but I can't tell it which form it's on because it says it's not declared.[code]...
View 9 Replies
Feb 21, 2012
I have a project in VSTO/VB using a BackgroundWorker that works fine. It is a form that calls for a web page of information. The web page can take a while, so I have the form calling with the BackgroundWorker.I then have an Excel Addin project that has added the BackgroundWorker project. When I call up the form from the Excel Addin project and use the BackgroundWorker to request the web page, it grabs the web page ok. But the work done upon completion, during the BackgroundWorker1_RunWorkerCompleted method, is resulting in an error message:
View 2 Replies
Apr 23, 2009
I create an empty boolean array check_state(), and then if a condition is met later in the script, I redim it and save a list of check box states as booleans into the array, and later check the array values, but I can't work out how to do this without causing an error if the array was not defined to begin with
View 1 Replies
Apr 22, 2010
A developer has created a custom control in ASP.NET using VB.NET. The custom control uses a repeater. In certain scenarios, the rpt_ItemDataBound event is encountering a data error. My goal is rather than having the user see the yellow screen of death, give the user a friendlier error explaining exactly what the data error is. I figured I would be able to use a Try/Catch block as shown below throw the exception, however, it appears that the event has nowhere to be thrown to and stops executing at the "End Try" line.
Protected Sub rpt_ItemDataBound(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.RepeaterItemEventArgs) Handles rpt1.ItemDataBound, rpt2.ItemDataBound
Try
ProcessBadData...
Catch ex As Exception
Throw ex
End Try
End Sub
In VB.NET, I can find where the repeater's DataSource is being set, however, I can not find a DataBind event. How I can capture the exception in this ASCX control so I can report it to the user. The stack trace looks like this. There is another repeater within the repeater that is actually causing the error (rptOther) and I'm able to catch the error, but I can only throw it to the rpt_ItemDataBound. How rpt_ItemDataBound is getting called without a DataBind event.
at Company.WebForms.Control.rptOther_ItemDataBound(Object sender, RepeaterItemEventArgs e)
at System.Web.UI.WebControls.Repeater.OnItemDataBound(RepeaterItemEventArgs e)
at System.Web.UI.WebControls.Repeater.CreateItem(Int32 itemIndex, ListItemType itemType, Boolean dataBind, Object dataItem)
at System.Web.UI.WebControls.Repeater.CreateControlHierarchy(Boolean useDataSource)
at System.Web.UI.WebControls.Repeater.OnDataBinding(EventArgs e)
at System.Web.UI.WebControls.Repeater.DataBind()
at Company.WebForms.Control.rpt_ItemDataBound(Object sender, RepeaterItemEventArgs e)
View 1 Replies
Mar 15, 2012
I've been programming a game recently and didn't want to make 99 weapons manually. I've tried making a loop do this for me. I've got the loop working, everything is perfect. But when I run the program and list all the Weapon(x).Name [x being any value between 0 & 99] they are all identical... HOWEVER. If I single step through the code it lists all the names from 0 to 99 perfectly fine. Why is it that single stepping through it produces what I want?
Private Sub CreateWeaponList()
Dim StatName(4) As String 'Creating 4 pre-made names for weapons
Dim WeaponName(4), RandomWeaponName As String 'Creating 4 more pre-made names for weapons
For x = 0 To 32
Weapons(x).Type = "Sword"
[Code] .....
View 2 Replies
