After I "Publish" the project (I'm assuming this is the same as "deploying" it?) I get a "page load error" on [url]...publish which was just created. Is there something that should be displayed?
View 1 RepliesI am facing another error "An error occurred trying to load the page. Member not found. (Exception from HRESULT: 0x80020003 (DISP_E_MEMBERNOTFOUND) )" performing the following scenario:- Opened a sample VS 2010 WPF project that I receiveved from a co-worker (Project compiles, and run on his machine)I tried to open project properties (Project --> Properties)The project properties panel/window didn't open, all it had was an error symbol (red/white X) and the error message above(HRESULT: 0x80020003).I am unable to view niether the designer window nor the code window (no messages are reported) but the pane where the code/design shoud display is empty, all you can see is the background color.
View 1 Replieswhen I clicked the send button it would work, but if you tried to hit enter it would just do a postback to the same page. Yesterday I thought I finally got it so it would work on chrome (it has been working just fine on firefox, but breaking on chrome/safari and it is an app for the iphone). But, even though I finally got it so it would change pages, it is now displaying an error. I narrowed down the cause to a postback that is being called right before the postback I want is being sent which is then cancelled. I assume the cancelled postback is blank because the problem I was having was the page would do a blank postback.[code]
View 2 RepliesNow I did a clean build, and tried to publish, and I get a lot of errors and warnings that I don't understand.
Error1Cannot publish because a project failed to build.11AllJ Slots
Warning2Assembly 'Microsoft.DirectX.AudioVideoPlayback.DLL' is incorrectly specified as a file.AllJ Slots
Warning3Assembly 'Microsoft.DirectX.DLL' is incorrectly specified as a file.AllJ Slots
Warning4Assembly 'Microsoft.DirectX.DirectSound.DLL' is incorrectly specified as a file.AllJ Slots
Error5An error occurred while signing: Failed to sign binReleaseapp.publish\setup.exe. SignTool Error: ISigned
:Sign returned error: 0x80880253
The signer's certificate is not valid for signing.
SignTool Error: An error occurred while attempting to sign: binReleaseapp.publish\setup.exeAllJ Slots
How can I get Webbrowser1 to navigate to each page and wait for the one page to completely load, then move to the next page...? [code]
View 3 RepliesDoes anyone know why a Page_Load would be called twice on a page when requesting an aspx page?I am using .Net 2.0 with the new .net 1.1 compilation model installed. Whenever I request a page, the Page_Load on the aspx page appears to be called twice, so does the Page_Load on and user controls added to that page.
View 16 RepliesDoes anyone has idea to customize publish page when we have used Click once to deploy our application.
AS when we deploy application with Click once, it can be installed by url of deployment.. we want to change UI element of Publish page..
I have an asp.net website that is using update panels on the page that i cant get to reload from the server. I have this for the disable page cache on the master page.
'Response.Cache.SetExpires(DateTime.UtcNow.AddDays(-1))
'Response.Cache.SetValidUntilExpires(False)
'Response.Cache.SetRevalidation(HttpCacheRevalidation.AllCaches)
'Response.Cache.SetCacheability(HttpCacheability.NoCache)
'Response.Cache.SetNoStore()
When I click the browser back button to go back to the page it says the page has expired. the other pages on my web site work and call the page load, the only solution i found but cant use is to wrp the whole page in an update panel, but i cant do this becuase i have a report viewer on the page that does not work with ajax.
I have a page to which i send some variables with the GET method. In my VB back-end i get those variables using Page.Request.QueryString("<name>")If i then use the IsNumeric method to make shure it is an numeric string i get True back as value.
When i then try to transform the string to an Integer using val, cìnt, Integer.Parse or cType I get an error saying that my string could not be converted to a integer.So i made an error page which gives me all the info i need to deal with the problem (view below) Exception Message: Conversion from string "" to type 'Integer' is not valid.
[Code]...
IsNumeric confirms that it is a numeric string and that it should be convertable to an Integer. So why won't it work. I don't think that my code should provide any extra information because it only gets the querystrings, uses IsNumeric and then tries to convert them.
I want to show default page in fckeditor on page load but but I am not able to this.[code]...
View 1 RepliesI get this error when I try to publish: Error 2 An error occurred while signing: Failed to sign binReleaseapp.publish\setup.exe. SignTool Error: ISignedCode::Sign returned error: 0x80880253
The signer's certificate is not valid for signing.
SignTool Error: An error occurred while attempting to sign: binReleaseapp.publish\setup.exe MITS 2008
I downloaded the .net 3.5 sp1 and it performed a repair but it still will not publish.
I have a page that add Items to RadioButtonList with this code :
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs)
RD.Read()
RBQ1.Items.Add(RD.GetString(3))
[code]....
When I click in any button in the same page, the entire page reload and it display 8 items in the RadioButtonList, If I click for the second time I get 12 items in the RBL...How can I prevent the page to reload if I click in this button. ?
I am using <%@ MasterType virtualpath="~/__.Master" %> to embed my master page content into child page to access control belong to Master Page. I have one DropDownList in Master page. And I want to access its SelectedValue in my Child Page.
Problem is when page first time loads and as I am trying to access DropDownList's Selected Value by writing in child Page - "Master.DropDownList.SelectedValue". I am not able to get DropDownList's Value. Its display's Blank.
But When Page.IsPostBack I am able to get SelectedValue of that DropDownList.
[URL] I get this error when trying to publish my application. I've spent 3 months on this project and it's nearly finished!
View 2 Repliesi get this error when i try to publish my application.I downloaded CAPICOM 2.1.0.2 and copied the CAPICOM.dll but nothing happened
View 1 RepliesI am trying to publish my app but when i do that i get an error:Error2An error occurred while signing: SignTool.exe not found.I already search the net, where they said that the SDK was not installed with vb2008. So i installed that one.
View 4 RepliesI recently installed VS 2010 Premium. Since then I can not publish any of my projects due to this error,[code]I just created a new Visual Basic Windows forms application and without adding any code published the project. (I do get this in my previous working projects also).[code]If you later install a more recent service pack, this security update will be uninstalled automatically.url...
View 4 Replies(image removed)
After publishing and running the setup, i get the above msgbox.. how do i fix this validation, to where i can publish my app without having it validated?
I have creating timekeeping application, I was used drag and drop for my datagridview. During build I can add, edit and delete records. But when I published and run there was an error saying (see below). [Code] When JIT debugging is enabled, any unhandled exception, will be sent to the JIT debugger registered on the computer, rather than be handled by this dialog box.
View 4 Repliesi have a application that i designed for an assignment which uses a DB (ACCESS) However when i publish the application it fails to load even though the application completes. I have managed to find that it is the database that is not copying over, how do i solve this (the db is located when debugging and is also in the project files)
View 3 RepliesSo i've been working on a page for a project where the person logs into a login page and then can see a list from the database of employees. everything is working except for one problem. If someone puts in a username and password, username= a and password=b, for example it still allows that individual to view the next page and doesn't throw the error that i have enbedded on the login page to say sorry you have the incorrect password/username. The working code that i have so far is below:
[Code]...
I am having problem with my windows based application in VS 2008. I have a page from where I copy the component and use the same on another page for saving my designing time.It works fine and run without error.But when I restart the solution then the 2nd page where I had pasted the component is not displayed in the form designer. I get the following on the screen
View 1 RepliesI'm using Visual Studio Development Server (Visual Basic 2010) and it works fine. Now I've enabled NTLM Authorization because I want to test the website using a different user account. Now when I try to access the website I always get the following error page:
Server Error in '/' Application.
HTTP Error 403 - Forbidden.
Version Information: ASP.NET Development Server 10.0.0.0 .I'm using a test account which is a normal user within our domain. I've already set the access rights in my project folder to Full Access for this user but it does not help.
When I deployed my project on a server, in certain circumstances, I get an error page that indicates I should create a custom error page. I was wondering how exactly I would implement this custom error page the server asks for to give me a precise and helpful message or preferably, how I would get the error to just display on the main page?This is the error message I got below
Runtime Error
Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine.
Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".
<!-- Web.Config Configuration File -->
<configuration>
<system.web>
[code]....
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.
<!-- Web.Config Configuration File -->
<configuration>
<system.web>
[code]....
when I try to publish my app I get this error.I am using VB 2008 XE on Win XP
Error2An error occurred while signing: Failed to sign binReleaseapp.publish\setup.exe. SignTool Error: ISigned
:Sign returned error: 0x80880253
The signer's certificate is not valid for signing.SignTool Error: An error occurred while attempting to sign: binReleaseapp.publish\setup.exeMITS 2008
It won't load a web page, I tried testing it in debug mode, but it won't open url.....I have the web application tool thing and stuff...
View 13 Repliesi used to use Auto..I'm trying to login to a website wait for the page to finish loading then navigate to another page.the issue is if i don't use wait command something like documentcompleted it skips the log in and navigates right away to the second page.I have no clue how to use documentcompleted this is the code i came up so far.[code]
View 6 RepliesI am new to programming and would like to write the following within a div (myGallerySet) from behind code (vb.net) on pageLoad:[code]Basically I have images details which are stored in a database and would need to dynamically added hence, why i need to write within a div container.
View 1 RepliesI am using vb.net code in which I am having a gridview control. Please see the below code
<asp:GridView ID="GridView1" runat="server" AllowPaging="True" AllowSorting="True"
AutoGenerateColumns="False" CssClass="innerGridTable" DataKeyNames="OrgID" DataSourceID="OrgGridViewDataSource">
<Columns>
<asp:CommandField ShowSelectButton="True" ButtonType="Button" SelectText="Select"
ControlStyle-CssClass="Button">
[Code]...
What can i used to get a visiting users referal URL?
I know about retrieving IP address etc but need to log a referal URL (e.g. google) on load.