I am trying to publish my app but when i do that i get an error:Error2An error occurred while signing: SignTool.exe not found.I already search the net, where they said that the SDK was not installed with vb2008. So i installed that one.
View 4 RepliesIm trying to publish a project but im getting this error.An error occurred while signing: Failed to sign binReleaseapp.publish\setup.exe. SignTool Error: No certificates were found that met all the given criteria.
View 1 RepliesI'm having a strange problem, I am able to build the program and run it, however, when I try to publish, I get the following errors and Can't Publish "SignTool reported an error 'Key not valid for use in specified state"
View 12 RepliesI'm having a strange problem, I am able to build the program and run it, however, when I try to publish, I get the following errors and can't publish:
View 6 Replies" An error occurred while signing: SignTool.exe not found"Vista Utlimate x64 Service Pack 1 Microsoft Visual Studio 2008Version 9.0.30729.1 SPMicrosoft .NET FrameworkVersion 3.5 SP1
Installed Edition: Professional When I attempt to publish my application using the publishing wizard, sign code not checked. I get the error above.Looking back through previous posts, this was a problem in earlier beta releases, but was to be fixed by the final release of Visual Studio.Searching my machine using the search function shows SigntTool.exe is not present on the machine.Frankly it has been a while since I tried to compile and publish a project using click once, but it worked then now it fails. So I cannot firmly blame it on the Sp1 installation, I'm suspicious.How do I make it work??Ed Warren
Do I have to sign my VB.NET applications? I'm getting an error: SignTool reported an error 'Keyset does not exist' But have no interest in signing anything as the project is small and will only be used internally to my department. I could create a temporary key. But why would I want to?
View 4 RepliesI am new to code signing.After I swtich from the temperary test certificate to a real certificate from a CA, when I publish, I got two errors"Error 1 Cannot publish because a project failed to build.""Error 2 SignTool reported an error 'An internal certificate chaining error has occurred.'."and when I checked "Sign the assembly", when I build, it asks for a password, after I entered password, it says "Cannot find the certificate and private key for decryption"
View 20 RepliesI'm having a problem publishing an application written in VB.NET in VS2005 using ClickOnce.I get the error:
Code Snippet
Now I did a clean build, and tried to publish, and I get a lot of errors and warnings that I don't understand.
Error1Cannot publish because a project failed to build.11AllJ Slots
Warning2Assembly 'Microsoft.DirectX.AudioVideoPlayback.DLL' is incorrectly specified as a file.AllJ Slots
Warning3Assembly 'Microsoft.DirectX.DLL' is incorrectly specified as a file.AllJ Slots
Warning4Assembly 'Microsoft.DirectX.DirectSound.DLL' is incorrectly specified as a file.AllJ Slots
Error5An error occurred while signing: Failed to sign binReleaseapp.publish\setup.exe. SignTool Error: ISigned
:Sign returned error: 0x80880253
The signer's certificate is not valid for signing.
SignTool Error: An error occurred while attempting to sign: binReleaseapp.publish\setup.exeAllJ Slots
I get this error when I try to publish: Error 2 An error occurred while signing: Failed to sign binReleaseapp.publish\setup.exe. SignTool Error: ISignedCode::Sign returned error: 0x80880253
The signer's certificate is not valid for signing.
SignTool Error: An error occurred while attempting to sign: binReleaseapp.publish\setup.exe MITS 2008
I downloaded the .net 3.5 sp1 and it performed a repair but it still will not publish.
[URL] I get this error when trying to publish my application. I've spent 3 months on this project and it's nearly finished!
View 2 RepliesI am facing another error "An error occurred trying to load the page. Member not found. (Exception from HRESULT: 0x80020003 (DISP_E_MEMBERNOTFOUND) )" performing the following scenario:- Opened a sample VS 2010 WPF project that I receiveved from a co-worker (Project compiles, and run on his machine)I tried to open project properties (Project --> Properties)The project properties panel/window didn't open, all it had was an error symbol (red/white X) and the error message above(HRESULT: 0x80020003).I am unable to view niether the designer window nor the code window (no messages are reported) but the pane where the code/design shoud display is empty, all you can see is the background color.
View 1 Repliesi get this error when i try to publish my application.I downloaded CAPICOM 2.1.0.2 and copied the CAPICOM.dll but nothing happened
View 1 RepliesAfter I "Publish" the project (I'm assuming this is the same as "deploying" it?) I get a "page load error" on [url]...publish which was just created. Is there something that should be displayed?
View 1 RepliesI recently installed VS 2010 Premium. Since then I can not publish any of my projects due to this error,[code]I just created a new Visual Basic Windows forms application and without adding any code published the project. (I do get this in my previous working projects also).[code]If you later install a more recent service pack, this security update will be uninstalled automatically.url...
View 4 Replies(image removed)
After publishing and running the setup, i get the above msgbox.. how do i fix this validation, to where i can publish my app without having it validated?
I have creating timekeeping application, I was used drag and drop for my datagridview. During build I can add, edit and delete records. But when I published and run there was an error saying (see below). [Code] When JIT debugging is enabled, any unhandled exception, will be sent to the JIT debugger registered on the computer, rather than be handled by this dialog box.
View 4 Replieswhen I try to publish my app I get this error.I am using VB 2008 XE on Win XP
Error2An error occurred while signing: Failed to sign binReleaseapp.publish\setup.exe. SignTool Error: ISigned
:Sign returned error: 0x80880253
The signer's certificate is not valid for signing.SignTool Error: An error occurred while attempting to sign: binReleaseapp.publish\setup.exeMITS 2008
When I install .NET 4.0 and try to run my .NET 2.0 designed application I get a ".Net Framework not found" error.
View 3 RepliesIam Using This Code to return app path it works good on my pc but on any other system it give the right path but an error also came
The specified file not found
Public Function App_Path() As String
Return System.AppDomain.CurrentDomain.BaseDirectory()
End Function
I had the following piece of code working for the last few weeks and earlier today it seems stopped working.I have the code in a try/catchh block and in that try I create a file, "Build.bat" with code in it that will get it to do some oracle/sql wizardry
If File.Exists(Application.StartupPath & "Build.bat") Then
Shell(Application.StartupPath & "Build.bat", AppWinStyle.NormalNoFocus, True)
End If
After stepping through my code I noticed that the catch is executed at the shell line, so I put it in an if statement to see if the file exists and it always comes up as true, but on the next line I still get a File not Found error.
Try
Dim BatFile As New StreamWriter(Application.StartupPath & "Build.bat")
Dim SQLPLUS As String[co
I have this weird(!) issue that I cannot pass a path as a variable. I really tried everything but I always get the "Cannot find path" error when executing. It has to do with the quotes, I guess.When I print out the path it is perfect like: "C:Documents and SettingsAdministratorMijn afbeeldingen" (with quotes)Maybe a basic problem but I'm stuck-stuck!
Option Explicit
Dim oFSO, sFile, oFile, sText, file, newText
Dim sFileArr
Set oFSO = CreateObject("Scripting.FileSystemObject")
[code]....
Using a basic script to copy 4 folders.
fso.copyfolder "F:OfficeTreeStuff", newfolder &"", True
3 folders copy fine. 1 does not: path not found error is displayed.
How can I have the particular file/path displayed that is not found?
I getting an error which is:
Error 1 Task failed because "AL.exe" was not found, or the correct Microsoft Windows SDK is not installed. The task is looking for "AL.exe" in the "bin" subdirectory beneath the location specified in the InstallationFolder value of the registry key HKEY_LOCAL_MACHINESOFTWAREMicrosoftMicrosoft SDKsWindowsv6.0A. You may be able to solve the problem by doing one of the following:
1) Install the Microsoft Windows SDK for Windows Server 2008 and .NET Framework 3.5.
2) Install Visual Studio 2008.
3) Manually set the above registry key to the correct location.
4) Pass the correct location into the "ToolPath" parameter of the task. OutlookBar v2 2005.
I can insert into my table by the bindingnavigator and dragging textboxes straight from the DataSet entering them and saving. But I want to insert into the DataBase via code and in order to do this I have used the below code to connect. I use this code to test the connection and cannot get it to connect. Just get the error to say the DB cannot be found.No username or password on the DB
Private Sub btnDB_Click_1(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnDB.Click
Dim connString As String = "Data Source=C:Visual Studio 2008ProjectsCollegeBetfairBetfairDB.sdf"
Dim myDB As New SqlConnection(connString)
Try
[code]....
I am using process.start to start Excel.The filename argument has blank spaces in the path and the argument is truncated at the first space.The error that is returned says the file cannot be found.
View 3 RepliesI am reading a file from the default location. I request a file by name only using an InputBox. If the User types a file that does not exist I get an exception error. I want to be able to handle the problem by outputting to a list box that the file was not found. My Code is something like:
sr = IO.File.OpenText(fileName)
IF fileName <> "found"
Handle issue
Else
Continue Code
I want to run a check to make sure the file does exist in the default location but not sure how to get it done. I had seen the Public Shared Function FileExists but I am not quite sure how to make it work.
I have the code below giving me grief because it gives unknown error (0x80005000) when trying to add a user to a second group[code]...
View 5 RepliesI am studying Visual Basic How to Progra by Deitel on my own. I am a beginner. My last two programs I have received the error message: Sub Main() not found. I am certain that I typed it in underneat Module Comparison. The program will not run.
Could it be a naming problem? If so can I correct it without re-typing the entire program.
I am using 2008 Visual Basic Trial Edition. Would it be better to use 2010 Visual Studio Professional?
I have a crawling program that fetches urls to parse the html and came across an unusual error since I started this. For a specific set of urls from a site when fetching using HTTPWebRequest and HTTPWebResponse I get the error The remote server returned an error: (404) Not Found This is unusual since it works when pasting it in my browser. Not sure if code is needed to posted but let me know if so.
View 1 Replies