I recently installed VS 2010 Premium. Since then I can not publish any of my projects due to this error,[code]I just created a new Visual Basic Windows forms application and without adding any code published the project. (I do get this in my previous working projects also).[code]If you later install a more recent service pack, this security update will be uninstalled automatically.url...
View 4 Replies
Just got this error in my vb2008 programs when trying to install on other computers (customers running XP and Vista). I am on a Win7 computer and are using MS Access 2007 databases. Up to now everything was just perfect - but now.... Tried to search the net for solutions, but got a lot of mumbo-jumbo I can not understand. what to do in order to supply a set-up program which works.
View 2 RepliesI have just created a new Extensibility Addin for Visual Basic using VS2005 Professional. This addin will be targeted at MS Outlook (I hope).When I look at the References tab of the project properties, I see the following message:-An error occurred trying to load the page.Unable to cast COM object of type 'System.__ComObject' to interface type 'EnvDTE.ProjectItemsEvents'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{22800963-2811-410D-BF87-A7808EAC977D}' failed due to the following error: No such interface supported (Exception from HRESULT: 0x80004002 (E_NOINTERFACE)).Why does this appear?How do I correct this?
View 6 RepliesNow I did a clean build, and tried to publish, and I get a lot of errors and warnings that I don't understand.
Error1Cannot publish because a project failed to build.11AllJ Slots
Warning2Assembly 'Microsoft.DirectX.AudioVideoPlayback.DLL' is incorrectly specified as a file.AllJ Slots
Warning3Assembly 'Microsoft.DirectX.DLL' is incorrectly specified as a file.AllJ Slots
Warning4Assembly 'Microsoft.DirectX.DirectSound.DLL' is incorrectly specified as a file.AllJ Slots
Error5An error occurred while signing: Failed to sign binReleaseapp.publish\setup.exe. SignTool Error: ISigned
:Sign returned error: 0x80880253
The signer's certificate is not valid for signing.
SignTool Error: An error occurred while attempting to sign: binReleaseapp.publish\setup.exeAllJ Slots
I am trying to publish a project that is 100% working, so that people can use ClickOnce to install it.Despite the project building and running fine, I am unable to publish it. Here is a cut and paste of the error [code]...
View 8 RepliesSince I'm unable to publish my main project, I've decided to start from scratch to see if I can locate the problem. I created a brand new project, just a simple form and dragged 4 controls onto it (a label, a button, a combo box and a checkbox). There is no code in any of the controls.I published this using Clickonce at url...(I'm aware people may not be happy clicking links). It's set to run only from the webpage. It runs fine on this PC, but on my friends PC and on my spare PC, it simply churns up a page of html error codes.
View 6 RepliesI'm having problem on deploying my project on windows vista....my program is working fine when I'm publishing it on windows XP. Unfortunately, I can't solve my problem with regards to the following...
[Code]...
get around this. I have a data base field that is a decimal data type and I want to display it in a text box with the following txtWeekdayRate = CType(RoomsDataRow!WeekdayRate, TextBox)I get the following error when I run my program.Unable to cast object of type 'System.Decimal' to type 'System.Windows.Forms.TextBox'.
View 20 RepliesI get this error when I try to publish: Error 2 An error occurred while signing: Failed to sign binReleaseapp.publish\setup.exe. SignTool Error: ISignedCode::Sign returned error: 0x80880253
The signer's certificate is not valid for signing.
SignTool Error: An error occurred while attempting to sign: binReleaseapp.publish\setup.exe MITS 2008
I downloaded the .net 3.5 sp1 and it performed a repair but it still will not publish.
what is the correct code for doing this:
Tablename: traineeinformation
if it is text like (it works fine);
addothers.Text = dset1.Tables("traineeinformation").Rows(0).Item("others").ToString()
but when i add image like; addpic.Image = dset1.Tables("traineeinformation").Rows(0).Item("picture") I have an error below: Unable to cast object of type 'System.Byte[]' to type 'System.Drawing.Image'.What's wrong with the code?
Unable to cast object of type 'System.Windows.Forms.ToolStripButton' to type 'System.Windows.Forms.ToolStripMenuItem'.This is the error, when I click on the bookmark(When I add the bookmark, It's a non-clickable menu item; the next time i debug it, it becomes a clickable url(button)
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
...
Call minginimi()
End Sub
[code]....
[URL] I get this error when trying to publish my application. I've spent 3 months on this project and it's nearly finished!
View 2 Repliesi get this error when i try to publish my application.I downloaded CAPICOM 2.1.0.2 and copied the CAPICOM.dll but nothing happened
View 1 RepliesI am trying to publish my app but when i do that i get an error:Error2An error occurred while signing: SignTool.exe not found.I already search the net, where they said that the SDK was not installed with vb2008. So i installed that one.
View 4 RepliesAfter I "Publish" the project (I'm assuming this is the same as "deploying" it?) I get a "page load error" on [url]...publish which was just created. Is there something that should be displayed?
View 1 Replies(image removed)
After publishing and running the setup, i get the above msgbox.. how do i fix this validation, to where i can publish my app without having it validated?
I have creating timekeeping application, I was used drag and drop for my datagridview. During build I can add, edit and delete records. But when I published and run there was an error saying (see below). [Code] When JIT debugging is enabled, any unhandled exception, will be sent to the JIT debugger registered on the computer, rather than be handled by this dialog box.
View 4 Replieswhen I try to publish my app I get this error.I am using VB 2008 XE on Win XP
Error2An error occurred while signing: Failed to sign binReleaseapp.publish\setup.exe. SignTool Error: ISigned
:Sign returned error: 0x80880253
The signer's certificate is not valid for signing.SignTool Error: An error occurred while attempting to sign: binReleaseapp.publish\setup.exeMITS 2008
I am getting the error in the code below ....
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Dim prasha As New Person("Prashanthi", "Acharya")
Dim mallika As New Person("Mallika", "Upadhya")
[code]....
This error first appear to occur randomly. Steps to recreate:Open Visual Studio and load a solution (some files automatically opened) - this is when the problem occurs Close all open files Restart visual studio and load solution (no issues)Open Exactly the same files again, restart visual studio and load solution so files open automatically (problem occurs!)
However, when trying to narrow it down to a single file (that is automatically opened when the solution is loaded), I couldn't reproduce the problem. Now with all the files open again the problem doesn't occur!!! So it looks like it is fixed - though this happened before and eventually the issue came back.
I think it is to do with one of the user controls with DevExpress controls on it - when the error occurs, the designer displays the error. Though I can't reproduce it at the moment to confirm that.
I'm having a strange problem, I am able to build the program and run it, however, when I try to publish, I get the following errors and Can't Publish "SignTool reported an error 'Key not valid for use in specified state"
View 12 RepliesI'm having a strange problem, I am able to build the program and run it, however, when I try to publish, I get the following errors and can't publish:
View 6 RepliesDear Sir,When I publish my package, i am getting the following error.
[Code]...
I think this can be solved by Changing the validity in the signing property of the package. But I'm not able to change this period.
I'm working on a project, doing fine until now, when debugging it gives no errors and works fine, but after I publish it online and download it, i get an error like thisSystem.Data.OleDb.OleDbException: Could not find file 'C:\Documents and Settings\Local Settings\Apps\2.0\Data\5OBGY35Z.KQX\BA0L3897.GKJ\ monk..tion_e4d7ac4b0efe78e1_0003.0000_40bef6809ef62922\Data\EquipmentWS.mdb'. although searching a little around that path i find the whole files including the 4 database.mdb there, and when i launch the program from that path, it works with no problems. But running the program from the installed files from the online setup still gives me an error.
My program contains 4 Access databases. They all are in the main program path with the other files, and all of them follow this pattern:
[code]...
When JIT debugging is enabled, any unhandled exception will be sent to the JIT debugger registered on the computer rather than be handled by this dialog box.
Error4Unable to open file 'D:ConstruContrWinAppConstruContrWinAppobjDebugConstruContrWinApp.Resources.resources': System Error &H80070020almunji
View 1 RepliesI have developed a windows based application using visual studio 2005 called DMS. On the client side, this application runs on asp dot net framework 2.0. We have created its setup file which has to be installed on the client pc. After the installation of the application, some of the users get the error message as:
DMS.exe - .net framework initiation error Unable to find a version of the runtime to run this application
(I have also attached the screen shot of the error message.) Trouble shooting done by me:
a. I had tried the re-install Dot Net Framework 2.0.
b. Scanned the PC for virus attack.
c. Install dot net framework 2.0 first and then the application.
d. Un-install and re-install the whole application.
But none of the solution works. The only thing that works temporarily is un-install the whole application and re-install it. Then it works for a few hours.
I am trying to connect windows form to oracle database on a remote server through VS 2005 and get the following error:Unable to connect: ORA-12154: TNS
[Code]...
Originally Posted by errorUnable to copy file "objReleaseVBNET.exe" to "binReleaseVBNET.exe". The process cannot access the file 'binReleaseVBNET.exe' because it is being used by another process.I am using Windows 7 and i have this odd problem during debug (F5-Run).It works only when i Run it for the very first time. After that i am keep getting this odd error message. I played with the permissions for a while but still nothing.
View 9 RepliesWhenever i try to press a button on one form to bring up this one other form i get the error:
"An error occurred creating the form. See Exception.InnerException for details. The error is: Object reference not set to an instance of an object."
I was just wondering if it is considered overkill to add:
[code]...
To every sub in your project. And what would be the side effects of this if any.
