I'm making a webbrowser and coding the ctrl+f function has proven to be too complicated. I therefore decided to link buttons with the ctrl+f window that already exists in IE. What i want to do now is hide the ctrl+f window that pops up. When I hide active window at the moment it hides the webbrowser and not the ctrl+f window that pops up.
[Code]...
I have a vb.net application that, when a short cut is pressed, a window pops up. I also would like to make it completely invisible, unless the short cut is pressed. In the default class that houses my code for noticing the short cut and coordinating the events of the short cut, I have placed the following code:
Me.ShowInTaskbar = False
I have isolated this code as the issue. The issue is that my application does not work when it is not shown in the taskbar. This is only the default form - for the pop up window I have a separate class. How can I create a workaround for hiding the window in the taskbar and hiding it in general?
Btw, this is my hotkey code:
Public Const MOD_ALT As Integer = &H1
Public Const WM_HOTKEY As Integer = &H312
Public Declare Function RegisterHotKey Lib "user32" (ByVal hwnd As IntPtr, ByVal id As Integer, ByVal fsModifiers As Integer, ByVal vk As Integer) As Integer
[Code]....
is it possible to automaticly hide the vs2008-window while i'm in a debuggersession? When VS comes at a breakpoint or there is an error the vs2008-window must pop-up.
View 2 RepliesI have been working on a program to hide windows for an active process. I found some examples on the internet explaining how to do this. The problem, however, is that after I hide the windows I cannot get them back. The process still shows up in task manager but i cannot restore the window..
Imports System.Runtime.InteropServices
Imports System.Diagnostics
Public Class Form1
[code].....
I was just googleing this, and i came across this
Dim p As New System.Diagnostics.Process
p.StartInfo.WindowStyle = ProcessWindowStyle.Hidden
p.StartInfo.CreateNoWindow = True
p.StartInfo.UseShellExecute = True
p.StartInfo.FileName = "cmd.exe"
p.Start()
Does that mean that i could show it again? if so, is there a code that can do this?Also, if i wanted to get the window that the user is currently in, how would i be able to hide that?
I have created an application domain, using which i am executing an .exe file.So the command window does open which has the title as file name. I want to hide the command window.
Dim newAppDomain As AppDomain = AppDomain.CreateDomain("", AppDomain.CurrentDomain.Evidence, AppDomain.CurrentDomain.SetupInformation)
newAppDomain.ExecuteAssembly(IO.Path.Combine(Offic eAddInConfig.Instance.BinPath & "Core", "file1.exe"))
Here a command prompt will be opened which need to hide.
So i want to start an application with my vb.net app and it should start as a hidden process, meaning no window and nothing in the task bar, only in the task manager ofcourse.
This is what i do
Dim fov As New Process
If CheckBox2.Checked = True Then
RichTextBox1.Text = RichTextBox1.Text & vbCrLf & "* - Launching"
fov.StartInfo.FileName = ("test.exe")
[Code]...
This does not work.. I have also tried the "fov.StartInfo.CreateNoWindow = True" command which does not work either. I can live with a solution that would start the window minimized instead of totally hidden.
I have a software that im working on currently and i need the key combination Ctrl+Alt+Del to open up another window.Are multiple key combinations possible in Visual Basic?
View 1 RepliesI'm trying to find out a way to detect when ever the user presses CTRL -ALT - DEL or Window + L to lock the PC.The code I'm using is
Private Sub Timer1_Tick(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Timer1.Tick
If (GetAsyncKeyState(17) AndAlso GetAsyncKeyState(18) AndAlso GetAsyncKeyState(46)) Or ((GetAsyncKeyState(91) Or GetAsyncKeyState(92)) AndAlso GetAsyncKeyState(76)) Then[code]....
However, as soon as the user presses CTRL-ALT-DEL the Windows Security Screen comes up and it is too fast for VB to detect that the keys have been pressed.I did a little reaserch on how to work around this issue and found that a GINA stub can be written which can delay the Windows Security Screen by some time say 2 secs which would be enough for VB to detect that the keys have been pressed.Also disabling Ctrl-Alt-Del through VB does not work because it is too fast for VB and I would like not to disable CTRL-ALT-DEL
I have a dialog box that pops up from a webbrowser window when i invoke click.I have copied a filepath to the clipboard but does anyone know how i can do a ctrl + v to paste the text into the dialog filename window.
View 3 RepliesI am using a 3rd part dll file (SolidWorks EModelView.dll, COM file) that has a version of 9.2.0.128. When I add it to the resources for the application, however, the AxInteropEModelView.DLL and InteropEModelView.DLL references show a version of 9.0.0.0. When I install the application on a client machine and try to run it, the application says it cannot find AxInteropEModelView.DLL version 9.2.0.128!
View 5 Replieshow do i call a routine when the user press CTRL+Z or ctrl+somthing?
View 10 Repliesusing the getasynckeystate for ctrl + c and ctrl+ v or copy and paste..How will I do that in this code? For example when i type in notepad it should also do in the richtextbox with this code it work but when it comes to copy and paste word in notepad it does not works and the richtextbox is empty?
Private Sub Timer1_Tick(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Timer1.Tick
For i = 1 To 255
result = 0
result = GetAsyncKeyState(i)
[code]....
I am using visual studio 2005.If I try to do wordwrap using Key combination (ctrl+R, ctrl+R), I get following messege:"The Key combination (ctrl+R, ctrl+R) is bound to command (&Rename...) which is not currently available.
View 3 RepliesI am using vb2005 to send keystroke to stock application software so i need to send Ctrl+C to an open window in the stock software then send Ctl+V to Excel in a specified worksheet and cell
View 2 RepliesI noticed that ctrl-c and ctrl-v are not working in my project. I am using VB2008 and have an MDI project. The child forms have textboxes but I cannot use the shortcut.
View 3 RepliesI'm trying to write a simple datagridview to excel. (I know there are lots out there but I can't find this one tweak)The following code runs well enough, I just need to be able to run a loop that says if a given row in the datagridview is .visible = false than I need the corresponding row in the excel spread sheet to become hidden.[code]
View 5 RepliesI have a datagridview and once I populate the view with the data source I hide the columns that I do not need. For some reason the 1st column is not hiding. I have checked the column name and they match and the 2nd line executes fine hides the column for the EVENTID. I even did a messagebox.show( dgvTourOther.Columns("OTHERID").name) and it returned the correct name.
dgvTourOther.Columns("OTHERID").Visible = False
dgvTourOther.Columns("EVENTID").Visible = False
The values being passed are all strings. I do this on 3 other datagridviews ok but for somereason this gridview is acting different. I am going to try an rearrange the columns and see if that helps.
I am working on a project in VB.net 2008. I have a problem arising while opening a form as modal from a modeless form. I have attached a project to demonstrate the problem. This demonstration contains three forms with following characteristics. [code]...
View 3 RepliesI have an app that writes to XML. If a text box is filled, then I write that value to the XML doc.
writer.WriteStartElement("VEHICLE_LICENSE_NUMBER") '10-28 writer.WriteString(frmCitation.txtPlate.Text.ToString)
writer.WriteEndElement()
[Code]...
Is this the only, or correct, method for hiding a tabpage in a tabcontrol?
Hide it:
Dim RemovedTabs as List(Of TabPage)
RemovedTabs.Add(aTabPage)
aTabControl.Controls.Remove(aTabPage)
[code].....
I am using VB 2008 Express Edition.
Say I have Combobox1 with items (1)Breakfast (2) Lunch (3)Dinner
and I have combobox2 with items (1)Apples (2)Bananas (3)Grapes(4)Oranges
Now when I choose Breakfast in combobox1, I want user to see all 4 items in combobox2. But when I choose Lunch in combobox1, I only want user to see (1)Bananas(2)Grapes(4)Oranges in combobox2, hiding Apples.
Does anyone know a code where I can hide an item in a combo box depending on the condition?
I have a bunch of controls on my form and am wondering if I can hide some so it doesn't look so cluttered.I only wnt to hide them on the designer though and not at runtime. Any way to do this?
View 7 Repliesam binding the datagridview with datatable, actually I am converting a dataview to datatble after applying the filter. After binding my datagridview, I am trying to hide the first column and I am getting an error "Index was out of range. Must be non-negative and less than the size of the collection.Parameter name: index"Below is my code. I have two rows and 22 columns. The first column name is IndexID and want to hide that column
Private Sub bindGrid(ByVal dv As DataView) Try Dim ChatsChild As New edsChildim dt As New DataTable dt =
[code].....
I am stuck on hiding a column in listview. I want to hide the items in that column as well. I tried setting the width to 0 but the user can still size it out and see it. I heard there was a way of doing it by removing the column completely and all of its items and then they can be refreshed back into that column when need be.
View 9 Replies[code].....
View 1 RepliesI know that .RowHeadersVisible = False will do this but it obviously also gets rid of all my column headings (which I want to keep). How do I get rid of the row selected column but preserve my column titles?
View 6 RepliesIf you start an exe file by using a Process, you can set certain ProcessStartInfo parameters beforehand, such as CreateNoWindow = True (to hide the process), as in this example:
Dim myExe As New Process
Dim p As New System.Diagnostics.ProcessStartInfo
p.FileName = "cmd.exe" 'starts the cmd console
[Code]....
Im learning VB.NET and as a first task im creating a login form. ive been trying to link it to another form once a correct username and password are entered. however, despite that i still cant be able to hide it or unload it once the next form is loaded
Here is the Code
Private Sub OK_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles OK.Click
If UsernameTextBox.Text = "chris" And PasswordTextBox.Text = "chrispass" Then
Me.Hide()
[code]....
The Form2 appears as coded above but the 'Me.Hide()' manages to hide the login form but then it appears again?
I want my panels to be visible when the radio button is check and when its unchecked it would hide.
Setup:
5 panels
5 radio button
radio button1 shows panel1 if checked Each radio button is set to show each panel and hide each one if its checked or not. Ex:
Private Sub RadioButton1_CheckedChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles RadioButton1.CheckedChanged
If RadioButton1.Checked = True Then
Panel1.Visible = True
[code].....
When my form loads it shows panel1 because radiobutton one is check. But when i select another radio button panel one doesnt hide. Also when i did it to the other panels such as 2,3,4,5 it does hide and show when the checked state has changed.
