Horizontal Scroll Bar In VB10?
Aug 30, 2010Is the Horizonatal scroll bar an available tool in VB10. If so where is it?
View 5 RepliesIs the Horizonatal scroll bar an available tool in VB10. If so where is it?
View 5 RepliesI am having an odd problem with the Horizontal Scroll Control in my program.I am using it to scroll a series of panels across a form.This is my code:
Private
Sub scrHoriz_Scroll(ByVal
sender As[code]....
The problem is that this works perfectly if I use the left and right arrows and it also works perfectly if I use the scroll bar's slider SLOWLY. If I scroll using the slider and move it quickly then the scroll gets out of sync.The small change and large change are both set to 1 and maximum is set to 8
I have a DataGridView with a panel above it, that contains a group of textboxes above each column. My DataGridView has a horizontal scroll bar. What I want to do is when the DataGridView scrolls horizontally, scroll the panel with textboxes above it, so they stay aligned.I tried handling the DataGridView's scroll event, but I'm not sure what to do with it.
View 1 RepliesFollowing default the datagridview will scroll following vertical. How can i do that. I tried :
DataGridView1.ScrollBars = ScrollBars.Horizontal but not work
I'm using VB in Visual Studio 2010
When I resize my form at run time (border set to sizeable) .Net automatically adds scroll bars.
I can pick the vertical scroll bar ok but on the horizontal scroll bar it always shows the resize cursor and so I cannot pick it.
Is there some way of controlling the zone within which the resize cursor is active or the active width of the border detection?
How would I get the width of a Horizontal Scroll Bar? I'm not talking about the Hscroll width properties... I know the default width in vista is set to 17 pixels. I'd like to know if someone has changed their scroll bar width to a custom setting. Does that make any sense?
[Code]...
I am trying to control the horizontal scroll of a panel box in vb.net. The problem is that I can only seem to move it just a little bit using the following code:
Private Sub HScrollBar1_Scroll(ByVal sender As System.Object, ByVal e As System.Windows.Forms.ScrollEventArgs) Handles HScrollBar1.Scroll
panSS.HorizontalScroll.Value = HScrollBar1.Value
End Sub
[Code].....
I'm coding in VB.Net 2010. What's the most efficient way to create a horizontal scroller (i.e., marquee)? I've found some dead threads and ways to do it in older versions of VB, but I'm not finding anything particularly recent....
View 4 Replies1.how can i resize my project's form1?i mean my form1 only has fixed size.when i'm trying to maximize the form(by click a square on the top right corner of the form) my form remains in the same size even the window has fullfill my screen.
2.how can i make my project to become an installer?
3.how to make exe file from the project?
Since the map image is bigger than my screen resolution 1280 x 1024, a horizontal scroll bar is shown. I use Location x and y to place icons, but the problem is:placing an icon at location (0, 0) when the horizontal scroll bar is at left-most position is different from when the horizontal scroll bar is at right-most position...If I move scroll bar to x-axis(right) 10 thenplacing an icon at (0, 0), should be (0, 0) but it is placed at (10, 0).n this case, is there any different approach?
View 1 Replieshow can I enable horizontal scroll bar for datagridview control?
View 4 RepliesSo I have a custom listbox that is displaying garbage text when scrolling horizontally. I need the custom listbox to stop an annoying flicker, but it's causing issues with the scroll. I think I could solve the issue if only I could access the hscroll event, but I don't know how to do that. I will put down my custom listbox class just in case you will need it to understand the problem.
Edit: I realized my question is a little vague - telling me how to access the hscroll event within the listbox will suffice
Public Class DoubleBufferedListBox
Inherits ListBox
Private resizing As Boolean
[Code]....
I am developing windows application in visual basic .net 2005. I am using datagridview and i want to handle its horizontal scroll event. i was using code below,
[Code]...
i have a datagridview with the scroll bar property's set to "both", but when the data is too long horizontally it wont show the horizontal scroll bars only the vertical. And instead it puts "..." The DGV isn't docked, or bound to any data source, im adding data programmatic
View 2 RepliesI have the following code to resize the datagridview but the vertical and horizontal scroll bar are not shown when there are colunns and rows exceed the width and height of datagridview objects.Bascially the following code is similar to dock to the botton, the only difference is docking to the botton change the Y position of datagridview and fill the botton section whereas my code fix the Y position of datagirdview and fill the bottom.[code]I have tried with the dg.ScrollBars = ScrollBars.Both but it it is not working as well..May i know how to get both scroll bars working.
View 5 RepliesThe following zipped up Visual Studio Solution on Skydrive is immediately buildable and runnable; a usercontrol on a Form. Problem? If you click on any of the Edit Buttons and move the Horizontal Scroll, the values as they change in the Label_Values are off by one when you release the slider button. I think this is a timing problem between the Paint handler and the Horizontal Scroll event handler at the very bottom of the User Control code. Sorry I didn't eliminate
View 2 RepliesI have a tab control with two tab pages. One page has the auto scroll enabled since there is to much content in the page. The middle mouse wheel doesn't scroll the scroll bar; I have to actually click and hold the scroll bar and drag it down to scroll. Is there a property to allow this?
View 2 RepliesI am loading several command buttons into it (one in each grid box). I have the panel set to autoscroll. When TableLayoutPanel is set to AddColumns, all works well. However, I dont want horizontal scroll, I want vertical. When I set TableLayoutPanel to AddRows, a vertical scrollbar will not appear.
View 4 RepliesHow would I leave the vertical scroll position as it is and set the horizontal scroll position all the way left if it isn't already in that position? I've been using Me.AutoScrollPosition and have come up with code that is satisfactory but I haven't been able to always leave the vertical scroll position exactly as it is and just move the horizontal scroll position to the left limit.
View 4 RepliesI have a textbox that shows events on a program, which I add. I use the 'scroll bar' option on the textbox to show the vertical scroll bar, but how do I make it stay at the bottom most possible? I am using this code while I am trying to learn how to do what I want the scroll bar to:[code]But how do I get it so the scroll bar will stay at the bottom-most it can? I'd like the newest, most recent events to appear at the bottom of the textbox, and to have the user not have to scroll down every time something new is added.
View 2 RepliesAnyone got any ideas on how i would go about fading in/out a textbox? Because only forms have opacity properties i was thinking of something like setting the background color to transparent and setting the forecolor of the text to the same as the background color. Then using a timer i could slowly change it to black, etc.
View 7 RepliesI am writing a program for my intro to programming class. we have to make a bar chart using asterisks to show the bar items. he said we have to use nested loops. that i understand, but i can't figure out how to add the asterisks into the string without causing them to all be on separate lines.
View 3 RepliesI want to Replace a file with another in vb 10.
1)when Anyone click a button it will open a open directory.then it have to replace the file they choose with mine.
2)i need the code
Dim as new openfiledialog
how do i change AxShockwaveFlash1 To ShockwaveFlash1 in vb10
View 1 Repliesis there a library for the matrix like the library of the complex numbers for example?
View 2 RepliesI had an assignment that I had done, which has been turned in, I was able to get it to graph, but it when it reaches the right side of the screen it drops off, when it is is adjusted using the velleman controls it jumps back up, hw would I fix this.
Here are the instructon for the assignment:
Write a program tat rads two analog inputs from a velleman board and plots the values on a rotating graph. The number of value plotted horizontally should be specified in a text box. Label the graphs vertical values in at least three places. Print the current voltage reading for each input in it's own lable. The graph should auto scale to fille the graph vertically and horizontally.
The two things that I couldn't get to work is the graph drops off the chart and I was unable to place the vertical values in three places.
Here is my code:
'Date: April 10, 2012
'Progammer: Cathy Hjelm
'Progam: wk8-1
[Code].....
I'm trying to use mockling with VB10(VS2010) to improve my unittesting. I have a C# lamda expression example but I don't know how to implement this in a VB lamda expression? v => v.Load += null The full Moq to raise the load event would be view.Raise(v => v.Load += null, EventArgs.Empty) .Net Developer
View 1 RepliesThe title basically says it all. What are the main differences between .NET 4.0 and .NET 4.5 and is it worth upgrading to .NET 4.5?Jordan St. Godard |Microsoft® Community Contributor 2011
double twoCents = .02;Console.WriteLine("$" + twoCents.ToString());
I have just opened VB10 for the first time and it converted my VB8 program beautifully, except that all of the screens are not showing any data !
My reference to the MS Access database file is as follows :-
"Provider=Microsoft.Jet.OLEDB.4.0;Data Source=C:MoneyMoney.mdb"
Do I need to change any of this syntax or is there some other reason why VB10 won't show anything ?
How can I set the width of a form in inches (or cm) instead of pixels?
I want to print the form, so it needs to always be the same dimensions (4" by 6"). I saw some examples for previous versions of VB, but nothing that works in VB10.