How can I find a listbox average removing the 2 lowest number? I tried
DimintSmall
AsInteger
intSmall = lstGrades.Items.Item(0)
ForEachItem
AsIntegerInlstGrades.Items
IfItem < intSmall
Then
intSmall = Item
EndIf
Next
lstGrades.SelectedItem = intSmall
I cant select or remove it
Basically I need to remove Listbox1 items that are less then average, but its giving me:
System.ArgumentOutOfRangeException was unhandled
Message=InvalidArgument=Value of '9' is not valid for 'index'. [Code]
I have a group of 3 numbers:
-SideA
-SideB
-SideC
I need a way to detect which one is the largest, and which is the smallest, and assign them to a variable.If SideA is the largest, then it is variable C, and SideB is the smallest, so its variable A, leaving SideC as variable B
I am trying to make an application that would use an inputbox that will enter numbers until the user enters -1 after the numbers were entered and the user entered -1 the numbers would display within the listbox and the average would be in a label displaying "The average number is" & averagenumber in my current application I have it from 1-5 my question is how would i allow it to enter an unknown amount of numbers and create an counter for it.
Public Class Form1
Private counter As Integer
Private item As Double
Private average As Double
Private numbers As Double
[Code] .....
I know how to get Total, Average, Highest and Lower number from using input boxes and so on, but how do you get them from within a listbox?I kno the format of the code, I'm just lost in how to get them from a listbox...I just need a few hints.
View 7 RepliesI am trying to program a noise reduction algorithm that works with a set of datapoints in a VB.NET DataTable after being helped with my other question. Basically, I want to take two integers, a coordinate value (yCoord for example) and a threshold smoothing value (NoiseThresh), and take the average of the values in the range of (yCoord - NoiseThresh, yCoord + NoiseThresh) and store that number into an array. I'd repeat that process for each column (in this example) and end up with a one-dimensional array of average values. My questions are:
1) Did anything I just say make any sense ;), and
2) Can anyone help me with the code? I've got very little experience working with databases.
[Code]...
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnDisplay.Click
Dim numberFile As StreamReader
Dim intCount As Integer
Dim decTotal As Decimal
Dim decAvg As Decimal
[code]....
0 value returns for the Lowest number..everything else returns fine...
For this assignment, the user has to enter 10 number and my msgbox will show the number of negative number aswell as the lowest number.here's what i,ve come up with
Quote:
Dim innombre As Integer
Dim innbrnegatif As Integer
Dim inpetit As Integer
[code]....
how to find the lowest value and obviously i'm not able to show the number of negativ number.
Dim innombre As Integer
Dim innbrnegatif As Integer
Dim inpetit As Integer
[code]....
I was able to make the program work for the smallest number but it doesn't show the number of negative number.2nd edit: i changed the innombre to innbrnegatif+1 in the nbrnegatif = innbrnombre+1 and now it seems to be working.
Get lowest number from different TextBoxes?[code]...
Now im looking to get the lowest number in one of the ".checked" TextBoxes and add that number to a new Array.
Can I do this to find the lowest value in an array greater than zero?
Dim findLowest() As Integer = {right, left, backRight, backLeft}
Dim theMove As Integer = findLowest.Min > 0
Can't seem to find it on MSDN.
I have a table named tbluser with fields code and name. I want to check the lowest unused number in code. For example table below:
code name
60688 jane
60689 dina
[Code]....
i have also one textboxt what is the first, second and third number to search
ex.
if
text1.text=6
therefore first number is 6 second and third is 06 and the result should be
60601 since in the code the lowest unused code is 60601.
Dim MyVal As Integer
Dim MyVal2 As Integer
MyVal = Val(TextBox4.Text)
[code]......
I am taking a VB2008 class and I have the entire program figured out except for one thing. I've checked our text I've scoured the internet and I've tried tons of things.
What this section of code does is access a data file, calculate the average from it... done.. that works, calculates the highest number in it... done that works... and calculate the lowest number from the file... nope... not working. I've tried tons of things and what i have in there now keeps giving me an output of 0, when it should be a 2.
Private Sub btnCalc_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnCalc.Click
'Calculates average, minimum, and maximum temperatures from data file
Dim month As String
[Code]....
I'd like to know how to sort an array that has entries with numbers after text.
I have a list of four entries:
Book 1
Book 2
Book 11
Book 12
Using Array.Sort(aBooks) returns
Book 1
Book 11
Book 12
Book 2
Is there a way to have it sort lowest to highest like 1 2 11 12 instead of 1 11 12 2?
I am new to using VB2010 (and coding in general). Also brand new to these forums . Okay so I am making a program that: allows the user enter the number of customers served for each of 12 months into an array. The application should calculate and display the following statistics: total number of customers for the year, the average monthly number of customers, and the months with the highest and lowest numbers of customers. Use inputBox to get user input. Do not accept non-numeric or negative numbers.
The problem that I am having is that I do not know how to display which was the best and worst month. I imagine I need something that targets the highest/lowest number and finds the text in the corresponding index but I'm not sure how to do this.
I need to find a method of looping through a listbox and retrieving the index number and values - quite straightforward in asp, but turning out to be something of a nightmare in winforms!Here is the scenario - The user can add values in a textbox, that are in turn added to a DataTable that gives it a unique ID and a row number, this is then bound to the listbox. The user can then move the items up or down the list by adjusting the row number in the datatable and rebinding to the listbox..
The problem that I am hitting is when the user needs to delete an item -the first part is easy - delete from the DataTable and rebind to the listbox. The bit where I hit the proverbial brick wall is needing to loop through the listbox rows and getting both the index number and the ValueMember - that way I can change the row numbers in the DataTable based on the index number against the ID number.
My objective is to find the lowest test score in the array and display it in the associated label using a DoLoop. However, I don't think I was to use the ForNext stmt.Could I have used the DoLoop without the ForNext? ' displays the lowest test score stored in an array
Dim testScores() As Integer = {14, 82, 94, 77, 11, 95, 38, 62}
Dim lowest As Integer = testScores(0)
Do
For subscript As Integer = 1 To testScores.Length - 1
[code]....
Heres my code so far:
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim Subject As Integer
Subject = InputBox("How many products")
[code]...
Only "0" appears in the TextBox2 and not the average number.
What is the formula in VB for finding the average of two integers?I know in normal math it is e.g. (4 + 6) / 2 it only needs to be the average of two values.
View 5 RepliesI am tring to find the Average Temp for the days entered,and I am not sure how to do this.Here is the code I have so far:
Public Class Form1
Dim Temp(6) As Single
[code].....
i created an array of 100 cells, and the user inputs the value into them now i have to find the average of the array but not all of the cells are used how do i go to the last value, instead of the last cell? [code]
View 1 RepliesI've got an arrayList full of ints, how do i find the average value in it?
View 2 RepliesI'm having a little problem with my code as it follows, im trying to find the average # between 1-10 that is selected in my listbox but i'm having problems with my counter that divides it by, as a result i am only getting the number selected Goal is to select a value in listbox and find average based on what is selected and how many values were selected
Public Class Form1
Private Sub xRecordScoreButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles xRecordScoreButton.Click
[Code].....
I tried the following code:
Dim T5NHCEDCavg As Double
qry = From employee In empList
Where employee.HCEDC = False And employee.X5 = False _
Select employee.DCFSA
T5NHCEDCavg = qry.Average
But I'm getting a design-time error that says "Overload resolution failed because no accessible 'Average' accepts this number of arguments." I realize that I'm missing an overload here, but I'm not sure what to use or how to do this. I'm pretty new to LINQ. I've got a dataset in memory that I'm querying, and there is a double-precision property DCFSA, of which I'm trying to get the average based on my query above.
Trying to get the user to put 3 numbers in 3 text boxes and get the average.Private Sub btnAverage_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnAverage.Click
Dim a As Integer = CInt(txtone.Text)
Dim b As Integer = CInt(txtTwo.Text)
Dim c As Integer = CInt(txtThree.Text)
[code].....
I have being having an issue when trying to find the average between 3 groups, female ("F") , male ("M") and Both Together but it seems that my If statement isn't working as only the "sumOfAllAverage" is showing and the rest is returning an value of "0"
[Code]...
I have a table called tblComparison - this table has the following columns[code]...
Once the averages for each column are created it needs to save them to tblMonthlyComparison - again the column names in this table are the same so in the fldDate column the program needs to enter 31/12/2011. In fldAverage of this table what we do is take the average that we found above for each column then plus them together and divide them by 5.
Anyone can give the coding for finding the longest & average length?(displayed in a messagebox)
View 1 RepliesI enter numbers and Names into a text box and click 'add to list'. THe names go into a seperate listbox to the numbers.I then press 'show me the list' and i get to view my numbers and names listed in the two listboxs. I also have a button which averages the numbers in the numbers list box. But i dont know how to get it to work I will divide by the number of items in the list box.note: The average will be displayed in a label called: lblavg
Here is a picture of my code: http:puu.sh/CsED
I have tried:
For each item In lstListAges.Selecteditems
[code]....
I was working on some code in VB.NET 2008 and somehow got a bunch of new functions to pop up in intellisense on a datarow array. I saw find, findfirst, sort, average, and lots more. They had an icon next to them in intellisense when I saw them. Then I went and changed some of the code and now I can't get them to come back. I have used 2005 and 2003 for a long time, but still pretty new to 2008.
View 1 Replies