I'm currently practicing working on mobile application using vb .net 2008. So I have these 5 forms that I link together. The form # 2 is where my quit button was positioned. I want to quit the whole application but form # 2 was the only form that is terminated while the rest of the forms was not.
View 2 Replies
When I install .net Frame work 2.0 I had this Error when the setup writing system register values RegSvcs.exe-Application Error The application failed to initialize properly (0xc000007b) click OK to terminate the application and i have running an blank application (blank forum) and i running it in the VS 2005 IDE iget this error: windowsapplicatin1.exe-Application Error The application failed to initialize properly (0xc000007b) click OK to terminate the application and i have a program in setup package that i made from 1 week . i have install this program and when i want to run it i had this problem
[Code]...
When i click on my installed VB.net application icon on the desktop,i receive the message : 'Application failed ti initialize property ox700000000000000 ..... click ok to terminate application'.
View 2 RepliesI have a simple GUI form to hide / show / minimize / terminate / force terminate Processes. i can do all well but for show and hide i need the MainWindowHandle to show or hide it
So here is hide process code:
Dim Proc As New Process = Process.GetProcessesById(List.SelectedRows(0).Cells(1))
Dim hwnd = Proc.MainWindowHandle
ShowWindow(hwnd,0)
If i try the same with show code:
Dim Proc As New Process = Process.GetProcessesById(List.SelectedRows(0).Cells(1))
Dim hwnd = Proc.MainWindowHandle
ShowWindow(hwnd,9)
The MainWindowHandle become 0 cuz its hidden is there is any other way to get the MainWindowHandle of Process ?
While developing on Visual Studio Express 2010, there are two buttons: Start Debugging, and Stop Debugging.
View 4 RepliesI want to terminate an application using the full file path via vb.net, so I am using this code snippet.
Public Sub forceCopy()
Try
'Dim strDatabasePath As String = My.Computer.FileSystem.CombinePath(Application.UserAppDataPath, "LIC.mdf")
Dim strdbLogPath As String = My.Computer.FileSystem.CombinePath(Application.UserAppDataPath, "LIC_log.ldf")
[Code] .....
I get an exception "Access Is Denied". I get the error at this line : For Each m As ProcessModule In process.Modules
I wrote the following code to build a basic game that makes two cars race (randomgenerator) and let the user pick their bets on the end results. I've gone terribly wrong somewhere in that my cars only race halfway then get stuck behind the start line and the programme keeps repeating the beeping and the messsagebox.show and adding results to the 'incorrect' box.
The only way to terminate the application is to hit 'stop debugging'.
Option Explicit On
Option Strict On
Public Class MainForm
[Code].....
I need to open, and when done, close an external Exe. In this instance, the Windows Calculator. Here is what I'm doing
vb.net
Public Class Form1
Dim MyProcess As System.Diagnostics.Process
Private Sub btnOpenCalc_Click(ByVal sender As System.Object, ByVal e As
[Code]....
From what I've seen and read, this is the way to terminate a running exe isn't it?
I have just started a simple project in VB 2008 express (having previous experience (not much though) in VB6). At the moment I have only 1 form and when I click on the red x close button the form closes but the process is still running in task manager. I have the following code which I assumed would exit the program and terminate the process but it doesnt seem to work[code]...
View 6 RepliesI'm having troubles with terminating an application. When I close the main form everything disappears but the process remains active. I think I know the cause, a certain activeX component will not release properly. As soon as I create one, I can't close normally...
dim someActiveXcomponent = new X()
...
<formClosing>
someActiveXcomponent = nothing
GC.Collect()
GC.WaitForPendingFinalizers ' here it hangs
Probably a bug in that component, but the problem is that I don't have much of a choice, I'll have to use that component for now.
Calling
System.Runtime.InteropServices.Marshal.ReleaseComO bject( myObject )
will kill the reference and now the application closes properly.
i made a program and used a program called Advanced Installer to put all the files from the build folder into one big install exe file to send to people but one they've installed it and go to open it they get an error saying: "the application has failed to initialize properly (0xc000135). Click on OK to terminate the application" What does this mean? do i need to have the NET framework on the machine its being run on?
View 6 RepliesI want to terminate an application using the full file path via vb.net, yet I could not find it under Process. I was hoping for an easy Process.Stop(filepath), like with Process.Start,
View 2 RepliesI have this on the form load;
Private Sub frmMain_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Me.Visible = False
Me.ShowInTaskbar = False[code].....
Notice: I used "End", to terminate the process.What I want to do is when the last function is called (Delete_AutoReq_PracNo) it terminates the execution of the application.
Reason...I'll schedule this application to ran from MS SQL Server at night. So realistically, doing all the processes I would like it to stop...Is what am doing sufficient to stop the application from running or there is a more robust approach..
FormA calls DialogB where user cancels DialogB which exits via ForceTermination(), see insert.Caller FormA check for DialogResult not = OK, which it isn't, and I can see this in debug as Abort(3).However, the code continues merrily along its way until I get a 'null reference' error which I'm trying to avoid via Force Termination().This is caused by the user cancelling DialogB, a selection process to get a database (SQL) instance.[code]
View 13 RepliesI'm developing a program using VB 2005.I've tried to use the following instructions to "kill" the application
Application.Exit()
Environment.Exit(0)
(not at the same time)
[code]....
I have a Visual Basic 2005 program which runs fine if I execute the built Executable. However if I start the application in VS2005 debugger it gives a weird error
[Code]...
In certain error situations within my VB 2008 code, I need to quickly terminate the program. This should be simple, but I haven't been able to figure out how to do it.
View 5 Replieswhen i run any of my program this error is show to me i don't know why, "it said that the program will terminate OK".
View 13 RepliesI have a DLL that copies an Access database, opens it, reads it, and then closes it. The second time through it is unable to copy the Access DB because the EXE has an open handle to it. The EXE does not reference the Access DB at all, it just has the open handle because it calls my DLL. After I close the DB, I would like to terminate the EXE's handle to the Acess DB. BTS - I wrote the DLL and it is my Access DB. Another company wrote the EXE and I can not make any changes to it.
View 5 RepliesI've started a process through system.diagnostics .process.start("C:/process.exe")Now my question is, how can I terminate the same process in vb.net
View 4 RepliesI'm trying to close down a program from within the constructor for the main form. I've tried Me.Close() but this gives an error: ObjectDisposedException was unhandled. Here's the details:
System.ObjectDisposedException was unhandled
Message=Cannot access a disposed object.
Object name: 'Form1'.
[Code].....
how about to terminate a tcp connection My program can view all the TCP connections and i want to terminate some connections but i realy don't know how to terminate some connection from another process
View 27 RepliesI have a website, that needs to not allow simultaneous logins. I am controlling that by cache. But, now I am unable to give them the option to log out the other session. Goal: is to allow them to login, and when they do, tell them that the current user is already logged in, and give them an option to close that session, so they can continue logging into the system (website).Have not found any way to terminate a specific SessionID. oh BTW, I do have the sessionID of the parallel session, just dont know how to kill that one. Again note, I do not want to close this current session, but another session whose SessionID I have.
View 2 RepliesI am not able to get the exit window button to terminate once I click on it. I am not sure what I am doing wrong. This is the code I am using for it: btnExitWindow.Enabled = True. Everything else is working fine when I run the program.
[Code]...
I need to terminate a method of button1_click if a condition is true.[code]
View 4 RepliesI am trying to end a program immediately when a critical exception is caught. But I am finding that code after my Try/Catch block is executing even though the code withing the Catch block is executing, and that Catch code is calling Me.Close.
I suspect it has something to do with background .net threads or something, but I have no clue how to deal with those kinds of issues. How can I stop the program as quickly as possible? If code after my Catch executes, it will (and does) throw lots of uncaught exceptions later. Currently, it is not feasible for me to try to catch all the other exceptions. I just want to report an error and end the program.In my form load routine, I create and set up a number of objects and arrays by calling various subroutines.The success of most of the subroutines depends on the sucess of three subs in particular, which are called early on. If one of those three fails, there will undoubtedly be a number of hard to trap exceptions later on in the load routine.
[Code]...
i know this is a big problem for a lot of people and there are posts everywhere..below, should this complete and close and terminate excel correctly? or am i missing something.
[Code]...
I am working on a Windows Service project that is supposed to start automatically with Windows and it has a timer to check if a certain process is created (in this case "iexplorer") the service should terminate that process. In addition, the user should not be able to stop the windows service.
I was able to create the process and make start with Windows. I changed the property (CanStop) to False but that did not help because after a few tries the servise stops. I used a For-Next loop in the timer to check for the process to terminate but unfortunatly, it didn't work. The code I used is:
Dim theProcesses() As Process = System.Diagnostics.Process.GetProcessesByName("Iexplore")
For Each currentProcess As Process In theProcesses
[Code].....
Excel process will not terminate...
Code:
oExcel = CreateObject("Excel.Application")
oBooks = oExcel.Workbooks
oBook = oBooks.Open(Filename:="C:Jared FC Project Desktopfixture tracking.xls", UpdateLinks:=False, ReadOnly:=False)
oSheet = oBook.Worksheets(1)
[Code] .....
I got exactly the same situation as the following link. I need to end the excel process after calling it in Visual Basic. But it did not and I have to use task manager to kill EXCEL process manually.
[URL]
I have been trying the same solution mentioned in the above link but not successful. Can any body to take the code below to let me know what I am doing wrong?
Code:
Please use the CODE tags when posting code. Click on this post's quote button to see how.
