I have a datagridview on my form.There is a column of roll no in the datagridview. I want that whenever user presses anyother key than a number key(ex:1,2,3,4....)than immediately i should get a messagebox that only numbers allowed. I have tried the below code on datagridView Cellvalidation event but its not working. how can i do such validation.
If GridView2.Item(2, GridView2.CurrentCell.RowIndex).Selected = True Then
If e.ColumnIndex = 3 Then
If Not IsNumeric(e.FormattedValue) Then
The problem is that if you never enter anything into a cell for a new row then that cell is never validated. This is a problem because I have columns that should not be null. I am doing the check in the row level validation and storing the information about which cells are empty that should not be empty. The row level validation works fine and the row level validation error indicator goes on,(red exclamation mark at the beginning of the row) but I also need a visual indicator on the individual cells that are in error.
I am thinking that setting the HasError property for the cells that are in error should cause them to display n error style (the default red border). Is there a way to this this either from XAML (perferably) or from code?Alternatively I could cause those cells to re-validate when the row editing is finished. Does anyone know how to do this?
how can VB.net validates the format of each cell on the excel file that it opens, for example, the first row should only be numeric, or cannot be null, is it possible that vb.net can check it before it inserts it in the dataset or data table?
Have this code so that when a checkbox in a column of my datagridview is checked, then the corresponding cell in column 2 (of the same row the check box is in) will turn blue with font color white.
[code]...
I'd also like to add a line so that as well as the cell going blue, the bottom border of the cell disappears, so cellborderstyle = none.
I have a DataGridView with several columns. One column is a TextBox column named "Status". This column can only show one of three values: 'Final', 'Ready', or 'No Reportable'. I want to have some code that would turn the TextBox cell into a ComboBox cell when the user left-clicks on the cell to allow the user to choose one of these three options. When the user clicks elsewhere or the cell loses focus I want the cell to change back to a TextBox cell.
Here is what I have so far, but the code throws an exception indicated below Plus, I don't think the code would remove the combobox when the cell loses focus.
Exception: "Provided cell does not belong to this DataGridView control."
Private Sub dgvCalculatedResults_MouseDown(ByVal sender As Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles dgvCalculatedResults.MouseDown Dim ht As DataGridView.HitTestInfo = Me.dgvCalculatedResults.HitTest(e.X, e.Y)
In cellEndEdit event I need current cell editedFormatedvalue ( well it is done) now my question is can we get the old value of the cell in this event or have to handle some other event for this means let I have a cell in which current value is abc and when I edit it it become def now I want to get both the values in cell end edit event ( or any else ) but finally I have to perform task on cellendedit
I have a datagridview and it has 8 columns as textboxcolumns. I am handling their cell validation with cellValidating event.
My question is that if cell validation fails for 3rd column of the datagridview then the focus should move from 3rd column to 1st column of the datagridview. How can i do this?
I have tried datagridview.column(0).selected = true, when validation for 3rd column fails, but this is not working. Focus still moves to the next cell. I can stop the focus to the current cell with e.cancel=true but i want it to move to the very first cell of the datagridview.
I have a datagridview and it has 8 columns as textboxcolumns. I am handling their cell validation with cellValidating event. My question is that if cell validation fails for 3rd column of the datagridview then the focus should move from 3rd column to 1st column of the datagridview. How can i do this?I have tried datagridview.column(0).selected = true, when validation for 3rd column fails, but this is not working. Focus still moves to the next cell. I can stop the focus to the current cell with e.cancel=true but i want it to move to the very first cell of the datagridview.
I have a datagridview that I would like to validate using the cellvalidating event. however as the user doesnt navigate between cells or rows in the datagridview. just enters data in a cell in the datagridview and then clicks a save button the cellvalidating event doesnt get fired.
I'm trying to validate that a particular column in a datagridview has been selected.
I've created this code which transfers the value of the selected Customer ID cell in the datagridview to another form.
Private Sub mnuFileEdit_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles mnuFileEdit.Click 'Define variable for the current selected cell value
[Code]....
It's working fine but at the moment any column in the datagridview can be selected and transferred which causes an error.
So I want to create an If Then statement which confirms that the selected column with the dgv is the PK_ID (customer ID) column before processing the rest of the code. I've tried playing around with "If dgvCustomerSearch.SelectedColumns("PK_ID") Then" but a "Value of type...cannot be converted to Integer" error occurs.
I have a DataGridView where Cell_Validating is being done. I have a Cancel button on my form that allows the user to exit out of the DataGridView changes. The problem is that if a cell was currently flagged as in error, I cannot exit and remove columns from the DataGridView. I get the following error: Operation did not succeed because the program cannot commit or quit a cell value change. Is there a way to cancel the validation once the focus has been removed from the DataGridView? Here is my Cell_Validating
I have just found that if a DataGridView image column's size (height & width - in pixels) is smaller than the image's original size (in my case all images are exactly 180 x 180 pixels) at the time the cell is populated then the image is automatically being converted to a lower resolution I assume to fit the image completely within the size of the cell). How can I stop the automatic scaling of the image?
The image below show the same file displayed twice, both at 60x60 pixels ('Thumbnail' column) and a blowup of the image (PictureBox populated via the CellMouseEnter event) to it's right. You'll notice the resolution of the first blowup is far less the the second. so, what made the difference in the resolution of the blowups is? In the second blowup's case I'd first stretched the image column's width to ~180 pixels and set the row height to match (via the ColumnWidthChanged event) then populated the DataGridView then stretched the image column to 60 pixels (its minimum).
I wish to have a list selection inside a cell of it. like when the cursor is placed in a particular cell and the user hits 'Tab' button in keyboard a list of names & no should be listed and they have to select a particular name, click a particular row in the list form, which in turn needs to fill the cell with the name value.m
There are 3 columns(Count,Item,Price) in datagridview which is bound to a datasource. The count is 1 by default and it should increment by 1 when i click on a button,so the count would be 2 if i click button again
i have a datagridview which i populate of a dB. i have 3 columns on the dgv Account ID, Account Type and Notes. i created an add record button, that enables the user to add records. Account ID is a numerator in the dB, and i would like to automatically add 1 to the numerator. however i can't get the value of the last cell in the last row. for now i am using
Dim RowCount As Integer = Me.grdAccountTypes.RowCount - 1 Dim AccountID As Integer = grdAccountTypes.Item(0, RowCount).Value MessageBox.Show(AccountID)
How to do that no one cell is selected in DataGridView at first moment? (There are some controls in my form before the DataGridView and I don't want that any element of DataGridView is selected when the form is loaded).
I have a datagridview which have a ComboBoxCell, ComboBox is bound to data,, I want to use it as Traditional ComboBox,, I mean I want to display its Item (from display members) on the base of its value.
For example: When I do this Datagridview1.CurrentRow.Cells(4).value = 4 'Cell 4 is the DatagridviewComboBoxCell
It gives me the error that "DatagridviewComboBoxCell.value is not valid",
But I want that this combobox should Select And Display the item which value is 4.
I'm using VB.Net.'m using DataGridView with ColumnType = DataGridViewTextBoxColumn.
I have 3 columns. Column1, Column2, Column3. for example:
Column1 Column2 Column3 1 AA AAA 2 BB EDIT 3 CC CCC
If column3's value = "EDIT", then I need to edit only that cell. Here for example: i need to make the Column3's second cell to be readonly=false.So i cannot make any changes to (1, AA, AAA), (3, CC, CCC) and (2, BB). Need to make changes only EDIT cell.I tried this code. CountR is the row in which EDIT values is there.
how to change the Cell Alignment depend on the conditions. If cell value is text then cell alignment should be Left and If cell value is Integer then cell alignment should be Right.
I am going to change the Default Cell Style property then all cell alignments are changing.. But i want to see if cell value is Integer then the value starts from Right Side...
I have several date fields in a datagridview, in sql these are saved as navchar fields. If the user needs to clear the date they can do so by highlighting the field and pressing the delete key. This clears the date no problem, unfortunately it sets the field to Nothing or "" (a blank). I need it to set it back to NULL for reporting purposes.
Here is the relevant part of the code: Private Sub dgvWeldingLog_CellEndEdit(ByVal sender As Object, ByVal e As System.Windows.Forms.DataGridViewCellEventArgs) Handles dgvWeldingLog.CellEndEdit Try If dgvWeldingLog.Columns(e.ColumnIndex).Name = "dgvtxtDateWelded" Or _ dgvWeldingLog.Columns(e.ColumnIndex).Name = "dgvtxtFitCheck" Or _ [Code] .....
If there is an error in the data entry then the form cannot be saved. When I trap DBNull.Value is says it is equals to "Nothing" and not "NULL".
Currently I am using this code to fill my datagrid. Dim da As New SqlDataAdapter("Select id, name, type, add1 from [company_details]", con) Try If Pdetails.Visible = True Then con.Open() Dim ds As New DataTable [Code] .....
How to get the data I want from a datagridview box. Simply Put, What I need to do is get every value from each cell in a row. So if row one is highlighted I need the Name, addy, and so on....from that row.
I have an app where in some of the DataGridViews I am able to easily highlight a segment of text within a cell, do a Ctrl-C, and then paste it into some other app. Only the highlighted text gets copied, which is what I expect.
However, with some of the DataGridViews, I try to do the same thing, but it will copy all of the cell's text, not just the portion highlighted.
I've scoured the cell, column and DataGridView properties and can't figure out what controls that ability.
