IDE :: Warning 1 Could Not Load Type 'System.Object' From Assembly 'mscorlib, Version=2.0.0.0, Culture=neutral
Jun 22, 2010
I have a simple application, that was working just fine then all of the sudden I open the file and the design pages will not show up and I get the following warnings:
Warning 1 Could not load type 'System.Object' from assembly 'mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' because the parent does not exist. G:ProgramsCONNS v 1.0ConnectionsFrontPage.Designer.vb 149 0
I am trying to upgrade a project from VS2005. It is a VB.NET project B that depends on a C# project that references a C++ dll, A.dll. I am getting an error saying 'Unable to find assembly A_class, Version 2.0.0.0, Culture=neutral, PublicKeyToken=null'. The targeted platform of the C++ project is 4.0 and since that project depends on others, I can't downgrade it. But I did set the platform for the VB.NET project to 4.0. What else does the Version 2.0.0.0 refer to ? I have tried to create a brand-new project and added the vb forms into it after I have built it successfully. The C++ dll is in the output directory, if the VB project doesn't find it there, it doesn't get to this point. During build. I either get no error (but forms don't load) or I get 2 errors (one for each form):
I am usig .Net 2005. My code works fine on localhost but gives below error : Could not load file or assembly 'MySql.Data, Version=5.0.9.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d' or one of its dependencies. The system cannot find the file specified. WRN: Assembly binding logging is turned OFF. To enable assembly bind failure logging, set the registry value [HKLMSoftwareMicrosoftFusion!EnableLog] (DWORD) to 1. Note: There is some performance penalty associated with assembly bind failure logging. To turn this feature off, remove the registry value [HKLMSoftwareMicrosoftFusion!EnableLog].
I have very simple project in VS 2005 (close to hello world). This project is referencing few other DLLs that I have built on the side using command line scripts. These DLLs are fine and working perfectly. None of these DLLs are defining a specific 'Locale', so they default to locale = 'null', and everyone seems to be pretty happy with that.However, one of these DLLs, say XYZ.dll, must link/reference a third party DLL which defines locale= 'Neutral'. I can see that quite clearly with ildasm:[code]If I remove the third-party dll reference from my XYZ DLL (removing some code then not linking against it), I can compile my basic VS project without any problem. The problem is that I do need to link against this third-party DLL and would like to use Visual Studio.Does anyone know about this "Culture name not supported" error?
I am getting the following error when i try to publish my application with the checkbox for ClickOnce Security On. Could not find file 'Microsoft.Windows.Common-Controls, Version=6.0.0.0, Culture=*, PublicKeyToken=6595b64144ccf1df, ProcessorArchitecture=*, _ Type=win32'. [projectname ]
I am running vs 2008 and and trying to connect to an sql server 2005 to do userauthentication, but the error message i get is"Access to the registry key 'HKEY_LOCAL_MACHINESOFTWARESmartinfoLibServer' is denied" and the message "A first chance exception of type 'System.UnauthorizedAccessException' occurred in mscorlib.dll" also shows in the immediate window.
I am getting a stack overflow exception during the process of my program. yes I have used recursion method in my application and can't see any other logic to get the data. Scenerio is I need to present the data in the grid as BatchNo|Parent|Date|Qty|Cost columns. I have stock history and old stockhistory table(17 million records).
Public Class Form1 Dim dtAgeing As DataTable Dim sTransdate As String Dim dcCost As Decimal
I am Using Visual Studio 2008 Express edition (.NET Framework 3.5) ... I got this Error when Using A recursive Call To a Function .. I have 3 Background Workers Which Select Data From Database With Status =0 , Take The file Name And File Path Asssosiated With That record, and Then Copy it to other place and on successful completion update the status to 2 otherwise to 3 . and again searech for other record having Status 0 and so on ..
i made a method for selection of record from database every worker call this function . Now I have a check when dataset is filled i checked is there any row ? if yes then it do the rest of work otherwise agin call it self to search for the record...ECURSION.. In Case of records with status zero , It works Fine But in Case of no records Which have status zero it recursively calls itself For approx 1.5 mints and then throws The Exception That " System.StackOverflowException occured in mscorlib.dll at line "DataAdapter.Fill(Dataset,Table)" . I have no Idea what to do with this ..
Eventhough I have Encloesd It in Try...Catch Blocks but It didnt Cath It .. I serached The Internet and msdn social help for it and i found that it occurs most with infiniteloop or Infinite Recursive calls. i know it is due to my recursive call to the SelectData Function But i have no option without it?And One thing more that this project i mean the exe of this project is concurrently runs with another project Which add data to the databse about Filename Filepath and status =0 for Fresh entry..
I have this situation where LoadWithPartialName appears to be the only good alternative, although it is marked as Obsolete. I work in a very tight dev environment with versioning and deployment policies that cannot be easily changed or bypassed. Let's say there's a .NET executable that I have no control on (from another division). Let's call this the client AppA application. AppA's version is 10.11.12.x. Application AppA has a direct reference to one of our class library that provides some service to the caller (returns some information).
Let's call it SvcB and the version is also 10.11.12.x. Now, AppA's division does not need to update their system as often as we do, so AppA's version will stay 10.11.12.x for some time, probably until we decide to change the format of the class that is exchanged between us. Our division needs to change the logic behind the service SvcB more often and the version must change with every major deployement.
So let's say we change the logic and we deploy a new version of SvcB, 11.02.11.x. AppA will still reference the old version, so the logic being used is now incorrect. We are thinking of creating a new "facade" to our service. Let's call it SvcFrontB. SvcFrontB's version will stay the same, in sync with the AppA's own version. Now I need SvcFrontB to load the most recent version of SvcB through reflection. This way, I am sure the latest logic is always used. How do I achieve that without using LoadWithPartialName ?
Is it possible to load a referenced assembly only if the .NET Framework version is lesser than a specific number? I'm using a selfmade LINQ library on .NET 2.0, but if the framework is 3.5+, it should use the M$ LINQ library, and ignore the selfmade one. Here's my library: [URL]
I created one windows application in visual studio 2008 (.net 3.5) and successfully created setup application also. It working fine. But in the customer system the application throws the title error. I got from another thread as add 'stdole.dll' in the setup application. But that answer related to
I have a text string like this which I will need to parse: FriMar1200:00:00EST2010 And I used the following Date.ParseExact("FriMar1200:00:00EST2010", "dddMMMddHH:mm:sszzzyyyy", Nothing) And it is giving me a A first chance exception of type 'System.FormatException' occurred in mscorlib.dll error.
I made an app that connects to a mysql database to update a table. It works fine from my test machine, but if i deploy the app to another computer I get error: Unhandled Exception: System.IO.FileNotFoundException: Could not load file or assembly 'MySql.Data, Version=6.3.6.0 I'm going through google to find a solution, but nothing has stood out yet, just wondered if anyone has encountered this before and knows of a quick fix.
I am working on an application which compiles fine on machine that is Win 7 and 64 bit CPU. But when copy and I run the exe file on similar machine (Win 7 64bit) I get error message: Error: Could not load file or assembly 'Interop.ActiveDs.Version=1.0.0.0,... I have added ActiveDS Type Library 1.0 C:WindowsSysWow64activedstlb as a reference in the project file.
I have problem when i use DTS package in my Application which I use VB.net .when i install the Application in the client and run it the are message appear :" could not load file or assembly ' interop.DTS,version=2.0.0.0,cultral,publickeytoken=null'or one of its dependencies . the system cannot find the file specified " In my PC run successfuly but in the client the previous?
I have finished coding an application which I designed for people working in my office. When I started to install the application to computers at the office, I realized that, in some machines, application doesn�t work properly. Although it worked for 15 computers perfectly, for 3 computers following error code is displayed:
System.IO.FileNotFoundException: Could not load file or assembly 'System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' or one of its dependencies. The system cannot find the file specified.
[code]....
WRN: Assembly binding logging is turned OFF.To enable assembly bind failure logging, set the registry value [HKLMSoftwareMicrosoftFusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.To turn this feature off, remove the registry value [HKLMSoftwareMicrosoftFusion!EnableLog].
One of them is giving us trouble in only 1 spot out of the 4 spots we use it at:The trouble spot is a windows form project that uses reflection to dynamically load some DLLs that run long running processes. One of these long running processes is an agent that relies on one of our vender DLLsWe're getting the missing assembly exception at the point where we first enter a function that references the library. I already checked the silly things such as if we had forgotten to move a reference from the old version to the new version, but that's not the case. I also checked the bin directory of the project and the assembly is there.
After working all morning and finally getting my dll to talk to my rdlc files, I decided to import my functions into my other code, but I get the aforementioned error.My dll is in my PrivateAssemblies folder as well as both my debug and release folders (x86 in case you were wondering).
I have an InvalidCastException Error in my program. The program is that i try to insert an employee record into a database table after getting the details from a form. I've used Money data type is SQL Server for salary and SqlTypes.SqlDecimal data type in employee template class. i've used a stored procedure to pass the values and i add the basic value by passing a parameter by the method
Dim prm8 As SqlParameter = com.Parameters.Add("@basic", SqlDbType.Money) prm8.Direction = ParameterDirection.Input prm8.Value = emp.Bsc
I've used the money datatype itself even in the stored procedure variable.I get the following error.
failed to convert parameter value from sql decimal to decimal Even if i use prm8.Value = Convert.ToDecimal(emp.Bsc)
I get an error Unable to cast object of type 'System.Data.SqlTypes.SqlDecimal' to type 'System.IConvertible'.
An unhandled exception of type 'System.IO.IOException' occurred in mscorlib.dll Additional information: The process cannot access the file "c:Fax524b2cfa00.tif" because it is being used by another process.
i am making an application that grabs an image from a folder, sets it to a picture box, then has the option to delete the folder... when i click the delete folder button i get the error:
