Unable To Find Assembly A_class, Version 2.0.0.0, Culture=neutral, PublicKeyToken=null?
Mar 13, 2012
I am trying to upgrade a project from VS2005. It is a VB.NET project B that depends on a C# project that references a C++ dll, A.dll. I am getting an error saying 'Unable to find assembly A_class, Version 2.0.0.0, Culture=neutral, PublicKeyToken=null'. The targeted platform of the C++ project is 4.0 and since that project depends on others, I can't downgrade it. But I did set the platform for the VB.NET project to 4.0. What else does the Version 2.0.0.0 refer to ? I have tried to create a brand-new project and added the vb forms into it after I have built it successfully. The C++ dll is in the output directory, if the VB project doesn't find it there, it doesn't get to this point. During build. I either get no error (but forms don't load) or I get 2 errors (one for each form):
View 1 Replies
ADVERTISEMENT
Oct 12, 2009
I am usig .Net 2005. My code works fine on localhost but gives below error : Could not load file or assembly 'MySql.Data, Version=5.0.9.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d' or one of its dependencies. The system cannot find the file specified. WRN: Assembly binding logging is turned OFF. To enable assembly bind failure logging, set the registry value [HKLMSoftwareMicrosoftFusion!EnableLog] (DWORD) to 1. Note: There is some performance penalty associated with assembly bind failure logging. To turn this feature off, remove the registry value [HKLMSoftwareMicrosoftFusion!EnableLog].
View 7 Replies
Jun 22, 2010
I have a simple application, that was working just fine then all of the sudden I open the file and the design pages will not show up and I get the following warnings:
Warning 1 Could not load type 'System.Object' from assembly 'mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' because the parent does not exist. G:ProgramsCONNS v 1.0ConnectionsFrontPage.Designer.vb 149 0
View 4 Replies
Jun 27, 2009
I have problem when i use DTS package in my Application which I use VB.net .when i install the Application in the client and run it the are message appear :" could not load file or assembly ' interop.DTS,version=2.0.0.0,cultral,publickeytoken=null'or one of its dependencies . the system cannot find the file specified " In my PC run successfuly but in the client the previous?
View 1 Replies
Nov 22, 2010
I am getting the following error when i try to publish my application with the checkbox for ClickOnce Security On. Could not find file 'Microsoft.Windows.Common-Controls, Version=6.0.0.0, Culture=*, PublicKeyToken=6595b64144ccf1df, ProcessorArchitecture=*, _ Type=win32'. [projectname ]
[Code]...
View 6 Replies
Aug 19, 2009
I have very simple project in VS 2005 (close to hello world). This project is referencing few other DLLs that I have built on the side using command line scripts. These DLLs are fine and working perfectly. None of these DLLs are defining a specific 'Locale', so they default to locale = 'null', and everyone seems to be pretty happy with that.However, one of these DLLs, say XYZ.dll, must link/reference a third party DLL which defines locale= 'Neutral'. I can see that quite clearly with ildasm:[code]If I remove the third-party dll reference from my XYZ DLL (removing some code then not linking against it), I can compile my basic VS project without any problem. The problem is that I do need to link against this third-party DLL and would like to use Visual Studio.Does anyone know about this "Culture name not supported" error?
View 1 Replies
Nov 5, 2010
I am using a a bin serlization for saving pictureboxes. And then i copyed the code and put it into my game player so it could load them in. But i get a error: "Unable To Find Assembly 'GME Game-Maker-Extreme, version: 1.0.0.0, Culture=nutual, PublicKeyToken:Null"[code]...
View 4 Replies
Mar 20, 2009
I have developed a windows based application using visual studio 2005 called DMS. On the client side, this application runs on asp dot net framework 2.0. We have created its setup file which has to be installed on the client pc. After the installation of the application, some of the users get the error message as:
DMS.exe - .net framework initiation error Unable to find a version of the runtime to run this application
(I have also attached the screen shot of the error message.) Trouble shooting done by me:
a. I had tried the re-install Dot Net Framework 2.0.
b. Scanned the PC for virus attack.
c. Install dot net framework 2.0 first and then the application.
d. Un-install and re-install the whole application.
But none of the solution works. The only thing that works temporarily is un-install the whole application and re-install it. Then it works for a few hours.
View 10 Replies
Jan 7, 2010
I have a web site that uses the both c# and vb.net in the app_code section. The different languages are separated into their own folder and correctly configured in the web.config.
<codeSubDirectories>
<add directoryName="BasicCode"/>
<add directoryName="CSharpCode"/>
</codeSubDirectories>
This works fine 95% of the time. In production using 2 load balanced servers I sporadically receive an error message along the lines of:
"Unable to find assembly
'App_SubCode_BasicCode.xxx,
Version=0.0.0.0, Culture=netural,
PublicKeyToken=null'.
The site is hosted in IIS7 and I think it has something to do with the name of the dll assigned during dynamic compilation. I do not see this problem in a single server environment. Could this be because when the session is balanced to the second server the dynamic compiled dll name is different?
View 1 Replies
Mar 31, 2009
How they relate and differ from each? What are the best practices for version control? Is there a primer about publish online? Or a good book?
And is it possible to make ClickOnce and a msi in one solution of VS 2008? If so, is there any conflict or pitfall?
BTW I am using VB if that makes any difference.
View 1 Replies
Mar 20, 2009
I have developed a windows based application using visual studio 2005 called DMS. On the client side, this application runs on asp dot net framework 2.0. We have created its setup file which has to be installed on the client pc. After the installation of the application, some of the users get the error message as:
DMS.exe - .net framework initiation error Unable to find a version of the runtime to run this application
(I have also attached the screen shot of the error message.)Trouble shooting done by me:
a. I had tried the re-install Dot Net Framework 2.0.
b. Scanned the PC for virus attack.
c. Install dot net framework 2.0 first and then the application.
But none of the solution works. The only thing that works temporarily is un-install the whole application and re-install it. Then it works for a few hours.
View 1 Replies
Sep 4, 2010
I have an application written using Visual studio 2005 (in VB.Net). When I run it on any machine I get "unable to find a version of the runtime to run this application and this same application successfully some other PCs[code]...
View 2 Replies
May 10, 2010
i've built my first exe and when i try it, i got this message:
unable to find a version of the runtime to run this application.
i would be happy if it said what is the needed runtime.
can someone tell me what i miss to run it?
View 7 Replies
Mar 24, 2009
I have an application written using Visual studio 2005 (in VB.Net). When I run it on any machine I get "unable to find a version of the runtime to run this application" and this same application successfully some other PCs..[code]
View 7 Replies
Jun 25, 2010
We have a VB .Net application that is targeted to the .Net Framework version 2, over the past couple of days users have been reporting that they are getting the following error message when running the program?
View 8 Replies
Jun 28, 2011
I have developed an application using VB.NET (.NET 2.0). I have put an exe on 4 client machines, it works fine on 3 clients but fourth gives me the following error:
Unable to find a verison of the runtime to run this application
I have .NET 2.0 framework installed on the fourth machine.
View 2 Replies
Mar 1, 2012
The general idea of whats going on is i am trying to transfer a structure from one project to another using binary and sending through a TCP Stream. What I Did:In my server i serialized the structure Maps(Map) to a temp file. Then I read all the bytes from the temp file to my buffer and sent it off to my client project.
[Code]...
View 5 Replies
Jun 3, 2012
I want my application to do something special :D.. jks
I just want it to compare assembly version to the file version something like this (btw i also want it if it is the same i want it to enable a button):
Private Sub StartSplash_Load(sender As System.Object, e As System.EventArgs) Handles MyBase.Load
If Assembly Version = File Version Then
[Code].....
so how do i detect Assembly & File version numbers?
View 4 Replies
Dec 4, 2009
I have recently upgraded an VB6 project to vs2008. I was almost finished when the following error occured. Unable to emit assembly: Referenced assembly AxInterop.MSFlexGridLib does not have a strong name Prior to this error appering, I tested my app several times and it was fine. Only after publishing it did the error appear. I have tried all solutions I could find, but nothing helps. I have read [URL]
View 1 Replies
Jun 17, 2009
I receive this error as "Assembly Load Error" whenever adding a form or other object that has to be inherited.
"Unable to load assembly. Ensure that the file is a valid .net Framwork assembly"
View 1 Replies
Jun 1, 2011
I'm wanting to include a system tray icon in my WPF project, and found this resource:[URL]..which looks like it will work beautifully, but it's written for C# and I'm using VB.net for this project. I downloaded his project and built the notifyicon as a DLL, then added as a reference to my project.
It throws up an error: Unable to emit assembly: Referenced assembly 'Hardcodet.Wpf.TaskbarNotification' does not have a strong name So I'm trying to figure out the best way to proceed. Do I need to strong name it, or is there a better way to do this?
View 2 Replies
Sep 24, 2009
could not find any resources appropriate for the specified culture ot the neutral culture. make sure "mysql.data.mysqlclient.properties. resourses. resorses" was correctly embeded or linked into assembly "mysql.data.CF" at compile time or that all the satalite assembelies required are loadable and fully signed.
View 1 Replies
Mar 20, 2012
The issue is in a windows based client-server application.In the GUI, the system date value is converted to string and is stored in a text box, which is displayed while the dialog gets loaded.How to change the format of date so that when the form loads the date is displayed in en-US culture irrespective of the regional setting of the system(for eg: regional setting of the system is "fr-FR").
View 1 Replies
Apr 23, 2009
I have dll and exe files which have assebly version numbers different from the values stored in AssemblyInfo.vb.If I look at the information displayed in the Details tab of File properties in Windows, the File version and Product version values are identical with the values of AssemblyInfo.vb. But when I use My.Application.Info.Version to display the version number at runtime, the value displayed is incorrect. Also when I add a reference to a dll file, the referenced version is incorrect. The incorrect value is the same as the value last time AssemblyInfo.vb was edited on the local machine. If the AssemblyInfo.vb file is edited on another machine, the value won't be updated on other machines.
Typical example: On a nightly build the build server increments the build number of all AssemblyInfo.vb files. When developer workstations are updated in the morning (get latest) the build number isn't updated at runtime - even though the AssemblyInfo.vb file is updated and compiled into a new dll or exe file. But file properties in Windows displays the updated build number as described above. I've been looking for other places where a version number might be stored (in case there are more than one place to update the version number), but I can't find any reference to the displayed build number when I search the source files.
If a developer workstation edits the build number, compiles, and edits it back to the correct value and builds again, the displayed value at runtime is equal to the value in the source file. It's like the AssemblyInfo.vb files must be edited on the machine that builds the solution, or the result is not reliable..
View 16 Replies
Jul 24, 2009
I would like to get latest version of the assembly. how?
View 3 Replies
Feb 24, 2011
Get real assembly version? [code]...
View 8 Replies
Apr 30, 2012
How does the Assembly Version get generated in VS/.NET? I know that there is a couple of strings in AssemblyInfo.cs or AssemblyInfo.vb with something like this:[code]But how does the final assembly version get created? How does it get incremented? Where does the last value get stored? We have a custom in-house release environment and I would like to customize the assembly version.
View 4 Replies
Feb 17, 2010
VS 2008 Is there a way to set the assembly version programmatically? For example, My.Application.Info.Version.Major is readonly. Therefore, I was wondering if there was a way to call some code from the assemblyInfo file to set <Assembly:
AssemblyVersion("1.0.0.0")>
View 2 Replies
Jun 17, 2009
I've seen a lot of the "auto version" update add-ons for VS, and well I decided to write one for myself. It's manually triggered, but put as a external tool in the IDE it works rather nice. I based it off of reading the AssemblyInfo.vb file for a project (so at the moment it only works in VB not C#). So my app (given certian parameters) will auto increment the FileVersion and Assembly version together, so they stay the same through out. (it simpler for me that way). But i noticed a little issue with this method of reading the assemblyinfo.vb file, changing the values and saving the file and then forcing a "Rebuild" of the project.
When I go to Explorer, right-click | Properties on the file, in the Version tab, the "AssemblyVersion" has not changed, where the Product and File Version has. so for example I've got Test.Exe I open up the project properties and set via the UI the versions to:
[Code]...
View 4 Replies
Apr 24, 2012
I am trying to use Ajax control toolkit in asp.net website. I copied the dll from one of my previous sample project. It has the following details
Assembly Version - 3.5.40412.0
File Version - 3.5.40412.2
Internal Name: Ajax Control Toolkit
Language : Neutral
Product Version - 3.5.40412.2
When I add reference to this assembly, it appears as "AjaxControlToolkit-3.5.40412.2" in the reference list. When I run the solution, I get a FileLoadException: Could not load file or assembly 'AjaxControlToolkit-3.5.40412.2' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
View 1 Replies
