To add Row programmatically,
Connected Datagridview with datatable
I like to add Blank Row in the datagridview, So
On the Last Cell, CellLeave Event
Datatable1.Rows.Add()
It is adding a row in the dataTable, but adding two rows in the datagridview, why...?
I am using vb.net 2010. I have a datagridview whose data source is a data table. I dynamically add rows to the data table.
[Code]...
After adding the new row, m_table is correct. However, DVGCusClient not only adds this row, but also adds two additional blank rows at the bottom. I have no idea where these two blank rows come from. Why I use above code is as follows: Use a data grid view to display data. When a user clicks a row, another form is opened which allows user to search/input some data.When the user closes the form, all data is saved to a data table and shown on the data grid view.
I am filtering a dataview which is used for a datagrids datasource.At runtime when I apply the filters (using Checkboxes to determine the RowFilter text) I get an additional blank row at the top of my grid. This is then treated like a row & is filtered out with other rows that don't fit the filter criteria but comes back when I remove the filter. Basically, its part of the underlying DAtaview it seems. It's not persisited to database but I can't seem to get rid of it when I'm filtering.
View 7 RepliesWhy does the code below result in 3 rows in my datagrid when there is only 2 rows in my CSV file? I end up with 2 populated rows and one empty row. The CSV file only contains 2 lines. I suspect the logic of the code below.
Do While Read()
row = New DataGridViewRow()
For Index = 0 To FieldCount - 1
[Code].....
I have a VB 2008 program over the Northwind DB customer table.It uses LINQ to add, delete and edit records.
So I load everything into a datatable/dataset first.The Add and Delete occurs when the buttons are clicked on a binding navigator. The edit occurs when a cell is changed, and that row is clicked off. I've set the Customer ID field as the primary key in the DT. I then bind everything together with a binding mavigator.
So far so good, Adding & Editing works nicely the DGV & customer table . [code]...
I have a datagridview that is being loaded from a dataset. This dataset is the result of a SQL Statement (which could be my problem). The MS Access Client table is the main table and contains 2 records, however, after loading the dataset, the row count is 3.
Below is the procedure where I load the dataset and then the DGV.
Public Function LoadClientDataSet()
Try
strSQL = "SELECT A.clientID, A.name, B.phone, B.zipCode, B.stateCD " & _
[Code]....
I have a datagridview with a datasource from a MySQL query. Works fine. However, I want to add an extra column and generate some data into the cells. This works fine too and shows up as intended. However, I cannot sort on that extra column and the contents of the cells in the column are cleared out if I sort on the other colums. I realize this is all because of the original datasource, but Im hoping there is a way to "connect" the extra column in somehow?
Grid_SearcherResults.DataSource = dbconnection.bSource
Grid_SearcherResults.Columns.Add("Location", "Location")
'Then some code to set the value of the cells in the new column.. etc
I have several problems with rows in a DataGridView. Background information: The DataGridView (DataGridViewCalib) is in one TabPage of a TabControl, some columns of the DataGridView are automatically DataGridViewCheckBoxColumn as the DataSource have some colums which are Boolean. This is a Windows Form written in VB.Net with Visual Studio 2008. The user loads an input data file.
The problems:
1) At first arrival in the TabPage, ShowDataGridViewCalib (code below) is called. All rows are then shown in the DataGridView, despite the code saying that some rows should not be visible. Breakpoints in the code show that the code do arrive at the Rows.Visible = False events. Despite all rows beeing shown a Watch in the debugger shows that:
[code]...
There are two alternative ways of handling the rows in the code. The first attempt (commented away here) is probably the "nicest".
For a WinForms VB.Net application, I use the Bindingsource's filtering capacity to filter data, which is seen in a DataGridview. The BindingSource is from a DataSet, created using the Designer, and the data comes from a Access DB, using JetEngine and .Net 3.5. So basically:
Datagridview.Datasource = xxBindingSource
xxBindingsource.Filter = "[extended filter string with multiple columns]"
This filtering works fine, however, now I included some extra columns in the DataGridView, which I'd like to filter on, too. Of course, when I feed the manually added columns to the Filter of the BindingSource, this doesn't work out.I've done some research, and was not able to find any way to use the BindingSource's filtering syntax on the DataGridview. I'd like to use this syntax though, as I designed quite a nice UserControl and class around it, to provide smooth, fast and simple filtering capabilities.
My application must display some data in Datagridview (status of COM ports communication) and i Used .mdb databases before for faster search and Datagridview update. How i understand Datagridview is importing data from DataTable and data in DataTable is imported from .mdb file, so i decided to make shortcut - stop to using .mdb file (data must be erased every time application start and it is useless make .mdb file and erase it every time, becouse it is increasing even when drop is used) and using only DataTable..
I want to row in Datagridview change it color to red when it's Collumn(6).text countains %error% string..
When Error in COM port is starting, i can fast find row in DataTable for that port and write information that Error accured for that port and DataGridview automatically updates:
Dim RRow as () DataRow
RRow = ds.Select("Port = 'COM3')
RRow(0).Item(6) = "Error Opening COM3"
When I try to change the datasource of my DataGridView, I am loosing the order of the columns and their type(checkboxes,comboboxes) that i specified on designtime! It's like changing the datasource is generating again the datagridview, why ? and How can I change the datasource without losing these information ? on form load i do something like
Private Sub frmGrid_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Dim Path as string
[Code].....
I have created a Datagridview by dropping in from the Datasource. After I changed one column to be a Checkboxcolumn but it does not represent the values. In the table (smallint) I have 0s and -1s but it doesnt matter what I enter as True and False Value in the column it just shows that the box is checked.
View 5 RepliesI have a DataGridView and in it a CheckBoxColumn, when I click a cell of that column the check box gets checked.I do it like this:
dgvMessages.CurrentRow.DataBoundItem("have_read") = 1
but the change does not get committed to the DataSource (or at least not immediately), so when I search through it I get wrong results.
I can't call AcceptChanges as that will refresh the grid and cause unwanted side effects... What can I do about this? Is there such a thing as an 'AutoCommit' property on a DataGridView?
my question is, is there a way to filter records in the dataset and use that records to fill in the datagridview? for example, a datatable (with 3 columns: ID, StudentName, Gender) is filled with list of students. i have two datagrids in the form namely DatagridView1 and Datagridview2. DatagridView1 is where the the list of student where Gender is equal to M and DatagridView2 is where the the list of student where Gender is equal to F.in my current solution, i am using a loop.
[code]...
is there a way without using a loop?
I simply cannot understand or see when a DGV's DataSource (a DataTable in my case) get's updated when a new row has been added to the DGV by the user. I have looked at row counts in the DataTable at every possible event and cannot "get" the correct number of rows (which I ultimately need to "get" the GetChanges(DataRowState.Added) of the DataTable.So, here's what I've done.1. The DGV is populated on the FormLoad event. It includes a ComboBoxColumn which has it's own datasource. All fine.Now, let's say initially there is 1 single row in the DGV. There is also and "empty" row at the bottom of the DGV, all cell values are empty.if the user Clicks the ComboBoxCol and chooses an item, then this actually creates a NEW friggin' row, RIGHT?!No. Not exactly. At least NOT in the DataTable (The DGV's datasource).I attempted to "check". Looked at the editingComboBox_SelectionChangeCommitted event:
Private Sub editingComboBox_SelectionChangeCommitted(ByVal sender As Object, ByVal e As System.EventArgs) _
Handles editingComboBox.SelectionChangeCommitted
Dim rct As Integer = ImprovementsEntity.improvementTable.Rows.Count
[code]....
I have an app that has a DataGridView with a few buttons. My intent is to have the DataGridView populate with the data associated with the button clicked. So if you click the States button it'll fill the DataGridView with the DataSet I have created with a link to a SQL table with a list of States.
View 7 RepliesI'm working on VB .NET 2008.
Target: Bind dynamic datasource in a cell of a Windows.Forms.DataGridView depending on the selection in previous column. The grid must have 7 columns. If the selection on comboboxcolumn 2 or 4 is done, the datasource of comboboxcolumns 3 and 5 mus change using a query with previous selection as parameter.
In a first try to develop this functionality i've tried to use Telerik.WinControls.UI.RadGridView control. I've created a customized celltemplate with a combobox in order to have different datasource for each cell on the same column. All worked fine but seems to be some kind of bug in RadGridView, because when the combobox is presenting the list, after selection the list continued showing, doesn't dissapears as expected.
Ok, after several days of fight with RadGridView, I give up, and I tried to use same strategy but using Windows.Forms.DataGridView. I've created two classes one inherited from DataGridViewComboboxCell and other from ComboBoxColumn, in order to insert my own combbox or have the chance to have access directly to the combobox values. But the combobox showed is the default combobox not my own combobox.
how can I create a custom comboboxcell but using my own combo, and having access from outside to this combo?
public Enum ClaimStatus
Ongoing = 0
Completed = 1
[Code]....
With code above, how do I assign the value to the combobox while retrieving data from the table so that it point to the corresponding combobox item. For example, if the value of status_ID is 1 then the combobox should show "completed" in the datagridview.
I have a datagridview with a datatable in a dataset as a datasource. When i add a new row in the datagridview it is automaticaly added to the to the underliyng datatable (its datasource) . However it will only be addad after i click another datagridviewrow. I would like that update to be just after i added the row or after i edit one of its cells and not only after i click a different row.
View 8 RepliesPosted this over at WinForms forum, just not much activity and thought I might get a quick response here....Not real certain if I am implementing this correctly, but I am attempting to programatically modify cell values in a DataGridView control with an underlying DataTable as it's DataSource.
[Code]...
I have a datagridview with 3 columns.
Now I need to fill the datagridview's datasource with 3 arrays.
Example:
(column1) Username- Joe - Mark - Thomas
(column2) Password - Joe - Mark - Thomas
(column3) Activiated - Yes - No - Yes
Then after i split what should I do? Should I add 3 arraylists in a class or should I use structure and how?
I'm trying to use a datagridview as the datasource for my mail merge, but I'm having trouble getting all the data to output to the word doc. I've based the below code on the following tutorial:
[Code]...
This is my first time really working with DataGridViews. And for my own learning, I am trying to create a "System Information" program. I understand you can easily do simple stuff such as:
DataGridView1.Rows.Item(0).Cells(0).Value = "OS Name"
DataGridView1.Rows.Item(0).Cells(1).Value = My.Computer.Info.OSFullName
In a windows form I do have a datagridview. When a user pushes the button, the underlying datasource of the datagridview (a dataview) changes and the new content with new columns is shown. This works fine, only problem is that the header-height differs and that the datagridview does not properly display the smaller headers until I click into the first datarow of the datagridview. Simply using the .refresh()-method of the datagridview after assigning the new datasource does not seem to work.
Here is a little code-snippet showing how I assign a new datasource to the datagridview.
Dim view As DataView = myDataTable.DefaultView
With Me.MyDataGridView
.Columns.Clear()
.AutoSize = True
.DataSource = view
For Each col As DataGridViewColumn In Me.MyDataGridView.Columns
col.ReadOnly = True
Next ...
My current problem is this:I have a form and I have in it three textboxes, 1 button and 1 datagridview; I also have an acceI'm learnig now on how to create a report without a database. But In how to set the datagriview as the datasource for my report
View 8 RepliesI've got a VB2008 application that can potentially generate a table with up to 540 columns. The table is then used as the DataSource for a DataGridView. With column counts in the hundreds the processing time can by over a minute. With all this in single threaded Form code the UI locks up until the DataGridView is loaded. I've taken time stamps of the process to find out where the majority of time is spent.
[Code]...
I'm learning some more VB in my spare time, and I'm making a simple customer database that uses SQLCE. I've got the datasource set up and all that, but for some reason when I hit accept on the form, nothing happens?
[Code]...
Brief : I have code which works if I don't dispose of the BindingSource after it has been assigned to DataGridView.DataSource but breaks if I do dispose it - why? Do I need to worry about disposing this?
[Code]...
So, what is going on here? When I set DataGridView1.DataSource = Bds does it just do this as a reference? How does Bds get disposed once the procedure exits? Does garbage collection pick it up if I assign something else to DataGridView1.DataSource? Do I need to worry about this?
I have a bound datagridview which populates from the database using parameters. I've added a combobox column through the datagridview properties. How do I access this combobox column datasource?
View 9 RepliesLet's say that I have a DataGridView(myDGV) which I populate as follows:
'...
Dim strSQL as String = "SELECT col1,col2,col3 FROM myTable"
'....
myda.Fill(myDtb)
myDGV.DataSource = myDtb.
'The above code fills the DGV with data from the underlying query
'of the DataTable.
'Supposing that I want to add an unbound Column to the end of the DGV which appears together with the data returned by the query, is it possibe?