I have recently written a VB.NET application and I am stuck on the deployment.I can't use the ClickOnce, because the program has to be installed on the machine under program files, therefore, I use InnoSetup.
My problem is that the application requires sqlclient and .net 4.0 to be installed, and I am EXTREMELY green to InnoSetup scripts.Does anyone know how to make InnoSetup check to see if they are installed, if not install them without prompting the user?I have searched high and low and can't find a relevent article to my needs. Some are for online downloading, when I need local downloading only, and others are for runtimes.
I just can't seem to find an article that shows how to install automaticly and silent.
I have created an shareware application using vb.net visual studio 2008 for windows desktop, and packaged it using innosetup 5.3.8. The problem is when i have installed the application in C:Program FilesApplication and it runs successfully(use trial period of the application), Im also able to install the application once again freshly with the same setup by installing in different directory.eg C:Program FilesApplication new . The application in C:Program FilesApplication new does not have any settings of the already installed one.
Where do i went wrong . Do i need to take care of this in my application(vb.net) or innosetup. How to take care of the already installed path in innosetup or carry the settings of already installed application to newly installed path by upgrading the older one.
I dont want to write any thing in registry because the application does not want any administrative permission requirements.If i install the application in same path it gets updated with the older settings being taken over to this new one and it works fine.
I am in the process of developing a messaging framework for a windows application that sends messages to a java application. To be precise when the win app wants to send a message it simply drops the message in a common database table which will be picked up by the java app. The windows application is deployed across 10 application servers (10 instances) over citrix for load balancing.Each instance of the application is capable of sending a message to the java application and each of these messages should have a unique id. From my end I need to make sure every message generated has to carry a unique id so that they can be identified when necessary. All the messages can be cleared every day or two.i am not quite sure about a best method of achieving this. Initially I wanted to create a static method that serves the next available id (incrementing the last id by 1). But this approach willn't guarantee unique number as the application starts only when at least one user is logged on. For e.g .On one server the app starts when a user logs in, he then sends a message and then the application stops when that user logs off. So when a next request for the app comes to that server a new instance will be started.
When I install .net Frame work 2.0 I had this Error when the setup writing system register values RegSvcs.exe-Application Error The application failed to initialize properly (0xc000007b) click OK to terminate the application and i have running an blank application (blank forum) and i running it in the VS 2005 IDE iget this error: windowsapplicatin1.exe-Application Error The application failed to initialize properly (0xc000007b) click OK to terminate the application and i have a program in setup package that i made from 1 week . i have install this program and when i want to run it i had this problem
When i click on my installed VB.net application icon on the desktop,i receive the message : 'Application failed ti initialize property ox700000000000000 ..... click ok to terminate application'.
is it possible to make one application send a task to another application and recieve the result from that secondary app?i made a text editor program and i added a scan feature and i made another app that has ocr capabilities.The scanner ability is in my text editor program, the ocr program doesnt scan you have to input an image into it and it will give text result a few seconds later.the prob is alot of times the ocr code uses sooo much memory and crashes when its incorporated with my text editor, but individually each application works fine and doesnt take too much memory. Memory wont be even an issue if the ocr program is standalone so that when it is done decoding image the application can be made to exit. now here is the question, how do i make my text editor send the image to the ocr program and how do i make my ocr program send the text back to my text editor? is it possible? i mean the only way i know off is creating temp files in a certain folder and having a timer on each program that keeps waiting for temp files. That just seems like pretty lame coding to me i was wondering if there's a better way?
Which is the best way to store application and user settings of an application running with multiple instances?My problem is that using the vb's "Application Settings" one instance would overwrite the other one.I want to identify each instance with a number passed via command line argument. I could use this number to identify the appropriate settings of the running instance, but I see in a local INI o XML file a better way to handle that.
I currently have a simple crystal reports application which generates a crystal report and in the built in viewer provided by VS2005. There is a drop down where you can select options to change the criteria of the report. I wish to convert this app to a windows executable which will take all those select options and generates pdfs based on the crystal report. the executable will be triggered by windows task scheduler...or maybe command line app?
Obviously this will be somewhat of a re-write. What would be the best way to start this as? a crystal report application or a windows application.
I have a windows forms application written in VB.NET which scrapes information from serveral web pages (who doesn't right)? Anyway, I am having problem with one particular site where partway through the page navigation my application hangs. When I press pause (or break) in the debugger, it stops on a call to System.Windows.Forms.Application.DoEvents.
Resuming execution shows that it really is stuck on this line (it does not reach the next line of code). It also hangs about the same point each time I run it (at least its consistent). Since System.Windows.Forms.Application.DoEvents yields to other threads on the same processor and then resumes execution of the current thread, I think the problem is that some other thread is not behaving well (not returning from some event handling code). I thought Windows 7 was pre-emptive, which makes me doubt that theory but I really don't know.
[Code]...
The program scrapes somewhere between 12 and 14 pages before it gets stuck on the call to DoEvents. Does anyone have a clue why this would happen? Why would any call to DoEvents hang?
i made an application for serial communication. for this application i need to set delay time. during this delay time i m doing some other task. So for those task i need to take back control from delay function, for this purpose i am unsing Doevents() function.Its work fine On other OS (XP, Windows7 32/64-bit). But Application.DoEvents() function halt and crash in windows vista.
Private Sub TimeDelay(ByVal DT As Integer) Dim StartTick As Integer StartTick = Environment.TickCount()
I have a vb.net windows application. I want to convert some part of it to an application that can be run on all mobile platforms like iphone,windows mobile, ipad etc. It should be platform independent
i m a vb.6.0 developer and now turned in vb.net. so i m new in vb.net.My problem is given below.i opened the word documents in webbrowser control and it is just showing a document page with rular. But my main problem is that i want to open whole word documents with tool &menu bar in webcontrol. i used the following code which is given below.
WebBrowser1.Navigate("C:dharmchandBlank.doc")i wrote this code in form_load events and when i run my application then it is showing just a page with rular. But not showing Menu bar & Standard or Formatting toolbar.
I am trying to use the System.Diagnostics.Process class.I have the following Windows Forms application. It consists of 1 Button and 1 TextBox. The only code is for the button click event as follows.
Public Class Form1 Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click Dim myProcess As New Process()
I need to send a short string, (less than 30 bytes, but sent every second), from one VB application, to a Delphi application.. is this possible, using CopyDataStruct, WM_COPYDATA and SendMessage functions in Windows?
I am looking for a VB.net book that strings me through the entire development process of an application (Prefered: WPF ,LINQ ,ADO). I have read a few books on OOP and VB.net with small code samples demonstrating the specific idea of the chapter.I think it would be really helpful if there was a book that programmed an entire application that uses a sql database (Northwind , Adventureworks).
I have designed and published my small created app with WINDOWS FORMS using VB 2010 EXP on Windows 7. I can only install the app on the machine that I used to develop the app.I want to install the app on another computer but I cannot. I usually have error reports.
Example:Unable to install or run this application. This application requires Microsoft Common Language Runtime 4.0.3 to be installed on your computer.
what can I do to be able to install the app on a different computer which does not have .Net and does not have visual basic 2010 installed.
I have recently created an application where a lot of data is loaded into objects when the application starts up, and other data as it is required. For example if the user requests the catalogue page then it will load all the top level category data into objects of type Category. This will then stay there to be used by other users (who will therefore not have to load this data into objects) and can be altered by admin if they happen to login during the same application instance. I know this is not the most efficient solution, as pointed out below, but it works and the page load, at the moment, is not too long. It is very quick if most of the required data is already loaded into objects. It is also tailored to the business' needs - unlike other techniques such as Linq-to-SQL.
My project Developed under Vb2008 and Distrubution package Created by 'Avanced Installer 8.1.1' runs fine in some PCs. But in a specific PC, it produces ApplicationError as 'The application failed to initialize properly (0X0000135). Click on OK to terminate the application." The PC is a standalone Pentium-4 PC with OS windows XP (SP2).
i have a program but when i want to run it in VS IDE or out of it i had this Error Application Error: The application failed to initialize properly (0xc000007b). Click on OK to terminate the application.I had made the program by basic language on VS 2005 . net
I would like to set a style for an MDI WinForms application in .NET (mix of C# and VB.NET). I would like all panels and forms to be of a certain color. I would like textboxes to be of a certain color when readonly and of a different color when NOT readonly. I don't want to use defaults. Any pointers on how I can make this GLOBAL for any Form that is developed for this application? Am looking for a way so I don't have to do this logic in every form I create.
PREFERABLY: Don't want to switch to using any third-party tools. Would like to stick with just WinForms and standard .NET libraries.
I have a fully functional multi-threaded VB2008 console application that I need to convert to a windows forms application. I am doing this to add additional functionality at a later time. How would I go about doing this?
