Inserting A Gap In Each Line Of A Text File
Nov 12, 2009I have a text file that I need to go to column 40 and insert 10 spaces. What appears to happen is it takes the filst line and appends 10 spaces for every line that occurs.[code]
View 9 RepliesI have a text file that I need to go to column 40 and insert 10 spaces. What appears to happen is it takes the filst line and appends 10 spaces for every line that occurs.[code]
View 9 Repliesi tried this but it didn't work,
if label1.text.contains "$" then "$" = " $"
Is there an easy way to insert a line into the very beginning of a large file?I want to insert an XML header line into XML files that my program processes (These files can be very large, so reading it via bitstream and writing it out is not a good option).
File.AppendText makes it very easy to append lines to the end of a file, but I don't see anything for inserting text.I wonder how does say Access work in processing say a 50 meg access database file? There must be a similar process where you can insert data anywhere inside a large file.
I've been looking through the FCL for a method that will allow me to erase a line of text from a text file and replace it with another line of text. Neither the StreamReader nor StreamWriter have a method for replacing or removing Text from a text file, as does the string object. Are there any available methods for erasing just certain lines of text from a file, and then replacing them with others?
In my code, I'd like to locate a certain line in the text file, and then at that point in the text file, use a For...Next Loop to replace each successive line of the text file with new text:
Dim user_data_file As String = "user_data.txt"
edit_input = New StreamReader(user_data_file)
Dim edit_line As String = edit_input.ReadLine
[CODE]...
However, I can't find any methods that will allow me to do this.
Basically what I'm trying to do is read a text file line by line. After each line is read, it will put each line into a separate text box. I've been trying to do this for a while and so far I haven't been able to. I tried using a for loop, but that just put all my lines in to one textbox.
View 8 RepliesI'm reading a text file with StreamReader, line by line. If a condition is met, then I do an operation and then start reading the file again from the first line. I realize I could close and then re-open the file, but surely this would be very slow.
I could do this easily in VB6, but pulling my hair out trying to do this in vB.net. It seems that 'Seek' is the function to use, but it doesn't work.
I've seen other examples, where it works, but you must open it a different way -- with a file number.
Imports System.IO
Dim I as Integer
Dim LineText as String
[Code].....
How would i insert some text into a specific file?Like say i have a file named helloworld.txt it has Hello World as text inside it, how would i take some new data like "Bye World" and then remove the contence of helloworld.txt and replace it with "Bye World" ?
View 1 Repliesi would like to store contents from a text file line by line to arrays before copying them to another text file. what i have is currently like this:
[Code]...
Currently I'm only able to store the whole content into one variable, would like to store the content line by line in arrays.
i am trying to read from a text file and enter this into a table.The text file contains just 3 didget numbers sepearted by a line to distingues a new number. The table consists of 2 columns called ID (which is auto increment PK) and ISBN. The table is called IntTable in a database called book.mdf. I have found some code which i need to change to accumplish this task.Can someone direct me as to what i should be trying to change,add etc i would be very greatful. I am extremly new to all of VB,ASP and using Visual Studio 2010 so please bare with me if i ask what you may percieve as silly questions.
[Code]...
I have to create a new program that reads to Text files. These text files are in the form of a report (with column headings). The purpose is to compare each record line by line to see if their have been any changes made. The record is based on an Account#. Over time these files will be considerably large. What is the best way to do compare records from each file. I'm thinking loading each file into an array and processing them that way.
View 7 RepliesBasically, I'm creating an application which takes a list of words in .txt format, such like this:
Abc
Def
Ghi
Jkl
mno
What I want to be able to do is modify the words, one by one, so that I end with
Abc1
Def1
Ghi1
Jkl1
mno1
or whatever the user wants.
I created this app in C++ to get the logic, since I am more confident with that
I must use streamreader to read text file line by line into array.
Here's what I've got.
Private Sub Button2_Click(sender As Object, e As EventArgs) Handles Button2.Click
Dim numbers() As Double = New StreamReader(txtfile.Text)
Dim numbersarray() As Double
[Code].....
I just joined this forum as I've been looking for a nice and serious VB forum for a long time
I'm having troubles making a program to search a text file line by line for a specific string.
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim objReader As New System.IO.StreamReader("C: est.txt")
[Code]...
as you can see in the code its supposed to read a text file and if the line contains the same string as in the textbox then its gonna make a messagebox.
now the problem, if the line does not contain the specific string but the next or any line other line does, then it should automatically read the next line on "Else" and that's where I'm lost
for a "Readnextline" command or something like that?
I have a list of random numbers in my text file.I read it like this.
Dim FILE_NAME As String = "C: est.txt"
Dim TextLine As String
If System.IO.File.Exists(FILE_NAME) = True Then
[code]....
How can I separate that in to 2 listbox?In my ListBox1 I want add lines with starting number like this ( 0905, 0906, 0915, 0916, 0917, 0926, 0927 ) And in my ListBox2 is with numbers start with this ( 0909, 0910, 0912, 0918, 0919, 0920, 0921, 0928, 0929 )How can I compare lines by multiple choices like that?
Ok, I saw this code on the net
Dim sFileName As String
Dim srFileReader As System.IO.StreamReader
Dim sInputLine As String
sFileName = "D:UsersArbenDesktopSerieA.txt"
srFileReader = System.IO.File.OpenText(sFileName)
[Code]...
under the code I pasted at the top, but I get the text on line1 in all labels, like all labels become 1, while the text should be 1, 2, 3 and so on. So anyone can help me do that, each label gets the value of the next line in the txt file
the following code was to be entered to read each line of the file "line by line" It did not work for me as instructed and I am trying to understand why?
Private Sub Button2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button2.Click
Dim FILE_NAME As String = "C:UsersOwnerDocuments est.txt"
Dim objReader As New System.IO.StreamReader(FILE_NAME)
Dim TextLine As String
[code]....
i need my program to enter text into a txt file but, i can not seem to find out how to make it press enter, and i what i mean is my program adds to the text like this...[code]
View 2 RepliesI have a text file like below;
606;16
101 GAZ MET.MED. - VIC.BRANESTI 2011-01-11T11:00:00
102 BRASOV - TARGU MURES 2011-01-11T10:30:00
[code].....
i got vb to read the text file but it reads the whole thing and displays it on a text line,how can i make it so it reads it like 1 line at a time after every click,so if my text file is like this
hello
goodbye
then i dont want it to display both, i want it to display hello and if i click a button again then it displays goodbye?
i am doing program to read text file and fill the data to multi array , in my code i tried to read the first line of text file to array (here i used class) to save this data on it, because i will use it to read the another lines , files have the following format (all numbers are integers, all intra-line separators are spaces): First line: Number of events, number of rooms, number of features, number of students after the first line as u see we have 3 line have 10 which mean the One line for each room:Roomsize and after that the line which start from zeros and ones it format as:-
4 3 3 2
10
10
[code]....
I have a list of random numbers in my text file.
I read it like this.
Code:
Dim FILE_NAME As String = "C: est.txt"
Dim TextLine As String
If System.IO.File.Exists(FILE_NAME) = True Then
[Code]....
How can I separate that in to 2 listbox?
In my ListBox1 I want add lines with starting number like this ( 0905, 0906, 0915, 0916, 0917, 0926, 0927 )
And in my ListBox2 is with numbers start with this ( 0909, 0910, 0912, 0918, 0919, 0920, 0921, 0928, 0929 )
How can I compare lines by multiple choices like that?
I'm still trying to write a text file using input value from textbox growth line by line...it mean everytime i keep in teh value in text box...it will write into textfile in new line... how to rename my text file by current date?...
View 2 RepliesI am trying to take a line from a text file and get the second half of the line "my.settings.useqs = true" is my example and i want to get true out of the line and then make a textbox contain the text aftter the = sign basicly.
http:[url].......
I've been writing a weight program for flooded pressure vessels and I'm having trouble retrieving the data from the text files I've been saving. I know how to write the data to the text file, but retrieving it with OpenFileDialog is not so easy for me.The user has individual text boxes that they input strings or numbers into and when they save the file, each text box input is written to one line in the text file. For example, the first text box is for the username, therefore the first line of text that is saved is the person's name, the second text box is the customer, thus the second line in the text file is the customer name, and so on.
(Actually, the first line of text in the saved file designates whether English units were used or Metric units because when the user retrieves the saved file, English units will open one form and Metric units will open a separate form, so some If...Then statement will need to occur).I need to be able to read the first line, have either my "EnglishForm"form open or my "MetricForm" form open, and then have each subsequent line of text be displayed in their corresponding text boxes. I know I need to use ReadLine or LineInput, but I don't have a clue what to do.Assuming the syntax I've displayed below would just magically work (if only life were that easy), it would look something like this
If FirstLineOfTextInFile = "English" Then
EnglishForm.Show()
ElseIf FirstLineOfTextInFile = "Metric" Then[code]....
And so on...I read a lot of articles from the MSDN library and exhausted each link that I've looked through from Google and Bing, but most only retrieve data from the file to a single text box through some loop or streamreader and don't take into account multiple forms.
Get Program To Read Text File And Display 2nd Line Of Text
View 6 RepliesThe process I currently use to insert a string into a text file is to read the file and modify it as I write the file out again which seems to be how everyone is doing it.
Since .net has such a diverse library I was wondering if there was a specific command for inserting a string at a specific line in a txt file.
I would imagine it would look something like this:
dim file as file
file.open("filePath")
file.insert(string, location) 'this isn't actually an option, I tried
I am trying to add a new row into a gridview but for some reason i'm having a problem in the for loop.Directly goes to dtCurrentTable.Rows.Add(drCurrentRow) and of course, have an error "'row' argument cannot be null.Parameter name: row", because the tcurrentTable.NewRow was not executed.
Why is this happening?
Private Sub AddNewRowToGrid()
Dim rowIndex As Integer = 0
[code].....
I got a program that generates 4 strings which I want to output to a RichTextBox. Getting them there isn't the problem, its getting them on separate lines I am puzzled with. As of right now, they are all just lined up one after the other, which isn't practical for what I need. I simply need 1 output per line, i.e.:
Output1
Output2
Output3
and so on.
How to insert line breaks?
I need to be able to change a path inside a document ( a config file to a program) to the current directory of the application im creating in VB so the text file looks something like
Quote:
something=234
blabla=io
ServerRoot=C:Server
i need to change c:server
Language: vb.net
File size: 1GB, and stuff.
Encoding of the text file: UTF8 (so each character is represented by different numbers of bytes).
Collation: UnicodeCI (when several characters are essentially the same, the most popular version will be the one unique.). I think I know how to handle t his one.
Because each character is represented by different numbers of bytes and each line has different numbers of characters, the number of bytes in each line also vary.
I suppose we have to compute hash for each line. We also need to store buffers location where the line each. Then we have to compare buffers. Then we will check whether the same line shows up or not.