I've added two labels to my form, named them appropriately, and then went to the code to do my thing.Intellisense is not picking up the 2 newly-added controls! I opened the .Designer.vb file for the form and I can see they are in there. I tried "cleaning" the project as well with no luck.
I have an aspx page that my colleague designed for me to stick on the back end. I made a few alterations to the page, adding various controls and things - and now the compiler doesn't recognize any of the controls on the page! The Intellisense is working just fine - I can type txtName. and as I push the . all the properties of a TextBox pop up as normal.ut when I try compile, the compiler says "Name 'txtName' is not declared".
It is in the file ClientProfile I have placed in both App_Code and also App_Code/Models
In my code behind I have the following
[CODE]...
The last word, "ClientProfile" has the scary squiggly red line below it. It is not recognizing my class.Even the Intellisense is not picking up te class. Do I have to register the class file in any way?
I would like to know the vReasons why vb.net 2005 is not recognizing changes when there are no errors. It does not capitalze and tab a new entry. When I try to debug it just goes to the previous debug not the current one.
I've never worked with VSTO and I've recently read all kinds of stuff about it. So I ask a theoretical question. I'm trying to make an addin which should (using buttons in it's own ribbon tab) upload the document to my website (it's like slideshare). The problem is that this file may be already uploaded and the user may be just trying to update it.
So I need a way to tell if this file has already been uploaded. I know the prediction can't be 100% accurate, that's why I'm going to ask the user with a dialog, but I need it to be fairly clever to alert the user if the file MAY BE is already uploaded.
This assumption can be client-side only, with a database of some sort (in the addin itself).I thought of recording the file's name and based on this I can decide if the file is new or it's already uploaded.
PS. Working on Office 2010 with the latest version of VSTO in VS 2010. My main .net language is VB but samples in C# are more than welcome (if you have ones).
I have been working in Visual Studio which has DevExpress. My project now doesn't recognize DevExpress so I now have 102 errors on lines like:[code]...
In addition to this when I try to go to the designer for my DevExpress report it can't load the designer :
"The designer could not be shown for this file because none of the classes within it can be designed. The designer inspected the following classes in the file: rptAll --- The base class 'Object' could not be loaded. Ensure the assembly has been referenced and that all projects have been built."
Yet when I look in my toolbox the DevExpress tools (XRLine, XRLabel...) are still shown and DevExpress is still located in my reference folder.
ok well i have to make a unit converter that when say kilometers is chosen it converts it to miles. However when i chose kilometers it seems my if statment isnt made properly so the program does not do what i want it to do.to make the if statment say that when i chose kilometer from the combobox make txtTo.text = "A". here is my code: i hope i make sense....
<Global.Microsoft.VisualBasic.CompilerServices.DesignerGenerated()> _ Partial Class Lab3 Inherits System.Windows.Forms.Form
I have a query that executes fine in TOAD, but when bringing back the results with either an ADO.Net DataReader or DataAdapter/DataSet, it's not recognizing a column in the select statement. See the query below... the column in question has its data coming from a dynamic table or sub-select or whatever you call it. I don't see why this is a problem in .Net:
Dim sql As String = String.Format("select bu.row_id, bu.name, selectedOrgs.bu_id as selectedOrg " _ & " FROM SIEBEL.s_prod_int_bu pb " _
I'm using visual studio 2008 SP1, I'm working with a web project in VB.NET. The problem when I add new class file (of-course in App_Code) it doesn't recognize it. all the old class files are working fine, but the new ones aren't. I restarted my computer and still the same problem.
Im making a little game. All it does is make a bunch of Random Letters. Move around the screen. Im drawing to the form with paint. But i wanted to make it. So you have to click the letter that my program ask's you to click. I know there is easy ways of doing this. Like just getting the x,y and the mouse x,y on the click event. But i was wondering. If i could accomplish this task. Just by Scanning about 10x10 pixels from where the mouse down event is triggerd. to see if a letter is there. And how i could make it see if it is an A or B etc. The font is white. And about this size. I was thinking about it counting all the white pixel's but that wouldn't work?
I have this app, and I want to make it so that people can access a site to send a message via a PHP script. I want to do this by loading the web content in a new form, which automatically closes when it recognizes a change in the URL of the WebBrowser. How can I go about doing this? Nothing I have tried has worked right.
This is VBA6.5.1040 using an Excel 2007 (12.0.6524.5003) SP2 MSO (12.0.6529.5000) spreadsheet. The aim is to use a cell in which one can type "Y" or "N" in answer to a question. Before proceeding, the code forces the user to choose one or the other (section B). This works perfectly well. I then added the code in section A so that the user could type "y" or "Y". It would then convert "y" to "Y" and the code would proceed as normal, and similarly for "N". However, the following code in section A produces: "Compile Error: End If without block If," and high-lights the first 'End If'.
I have an click once application. The prerequisites which i have mentioned is .net Framework 2.0. If the prerequisite is not there in publish.html, i get a button to download it, else the Run button will install the application (which is developed by me) . This works fine in all the machines, except for one in which i have the following versions of .NET Framework,
.NET Framework 3.0 Service Pack 2 3.2.30729 .NET Framework 3.5 SP1 3.5.30729 .NET Framework 2.0 Service Pack 2 2.2.30729
In this machine even though we have Framework 2.0 and higher versions, i am getting the button to download Framework. This is not correct.
My problem is I have code delete a cookie it deletes it perfectly but my webbrowser1 doesnt recognize that its gone unless I restart the app. I'm wondering how I could get the webbrowser to restart (not refresh) or any way to get it to recognize the cookies no longer there?
when I added a textbox to my form, my keydown events no longer work. It seems impossible to get the blinking cursor out of the textbox so as to avoid targeting it. How do I retain keydown events when a textbox is added to the form?
Visual studio 2005 - vb.net..I have a user control on a form containing 15 combo boxes.All contain Y, N, and blank (for Yes, No, or blank) in the Items Collection property.Each of the combo boxes have a binding source to the same table, different fields.When you select a value Y, N, or blank for any of the fields and do a save, the values save while the application is open.Once you close and reopen, the values are gone.It appears the dataset does not recognize the change, so the values are not getting stored in the database table. Is there something I can do or put in one of the events that would identify this as a change.
I find myself frequently turning off Intellisense because it adds wrong choices to my code. For example if I try to type "i " (without the quotes) it causes "int " to be put into my code. If I type "for " it may put "form " into my text.
Reaching for the ESC key constantly slows down my typing. (It's such a long way to reach for small hands). Is there an alternative way to exit out of intellisense without the highlighted choice being placed into my code, or is a way I can define a different key for this purpose?
is there a way to enable IntelliSense for XML literals in VB9 (VS 2008)?The ideal source of IntelliSense is an XSD document, but I can use anything else format to do it.
I do not get intellisense working when creating a Property. How do I get intellisense to work here? Intellisense seems to work otherwise, just not with the Get / Set instantiations.
I am primarily a C# developer; however, I am currently working on a project for a client who preferred VB.net. I have managed to switch over fairly well, with one frustrating exception. When editing a C# file in Visual Studio pressing enter will select an item out of the IntelliSense window and keep the cursor at the end of the selected statement.
However, when editing a VB file, pressing enter selects the item out the IntelliSense popup AND moves the cursor to the next line. I realize that this is a small thing, but it drives me crazy, because it makes it really hard to switch between C# and VB projects.
I have searched for everything I can think of in Google and found nothing. Does anyone know of a way to change the IntelliSense selection behavior?
In VB.NET projects, errors are highlighted immediately after cursor leaves the line. In C#, I have to wait several seconds for IntelliSense to highlight it. Also, the C# version doesn't show all project errors in "Errors List", unless you start to build it. Actually, it seems to work differently in every way. Is it possible to adjust that behavior?
I am using both Visual Studio 2008 and Visual Studio 2010.
I'm using coderush with vs 2008. coding in VB.net. I don't see any evidence of Intellassist, all i see is the usual VS intellisense. Is this normal? Preferred? Do most people leave the defaults or do most/some turn off vs's intellisense? Does intellassist somehow argument intellisence?
i know someone will say this belongs in database programming but i don't think this problem is to do with databases and is more to do with visual studio.
when i start to type oledb.oledb..... intellisense would usually give me an option for oledbcommandbuilder. in the current program i am doing for coursework this option is not given. i can choose oledb.oledbcommand but i do not know how to use it (too advanced for A-levels, yes i'm british) if i actually type oledb.oledbcommandbuilder visual studio does'nt show an error in my error list. so what is going on? how can i get visual studio to recognise oledb.oledbcommandbuilder?
I want to use Enter instead of Tab to choose from the intellisense list(This is in VB)From what I can se from this rather old post [url] it was not possible. Has anything changed from there? I use Visual Studio 2010 Ultimate.