Interface And Graphics :: Controls Not Displaying

Dec 31, 2009

I have inserted a form into my project that a friend sent over. The form works but if I add more controls to it they are not displaying.

The controls are all there in the <form>.designer.vb file but are simply not displaying when I run the form.

I have looked around the net but can find no reference to a similiar problem.

View 1 Replies


ADVERTISEMENT

Interface And Graphics :: Displaying Forms In Another Form?

Nov 17, 2011

I'm looking for a tool that will allow me to display, and change forms, inside my original form.

View 5 Replies

Interface And Graphics - Displaying Child-forms In A MDI-application

Jan 23, 2010

I'm having a small problem concerning displaying maximized child-forms in a MDI-application. Everything works fine on Win. Vista but when I start the program on a PC with Win. XP it doesn't look very nice. I found some similar threads on the internet but no answers. Does anyone know how to display maximized windows in MDI properly? [Code] On Vista the child-form switch/appear really smoothly. On XP you can see as they are being maximized.

View 7 Replies

Interface And Graphics :: Displaying Data Graphically (Ultrasonic Radar)?

Mar 15, 2012

I'm working on an ultrasonic sonar and I would like to use the computer to display a standard green radar system detecting the objects. I'm using a micro controller with the software written in C to send out the sensor's angle and position and it works fine.On the computer side, I'm using Visual Basic 2010 to read the COM port which then contains the sensor's data in numbers (sensor's angle and distance between sensor and object)which is a constant stream. On the debug screen (Textbox) I can already see all the data coming through.Now my question is: How do I convert those numbers into graphics?

More explanations about these numbers I want to convert:I have a step motor to rotate the ultrasonic sensor, and it works that way:The motor advances 1 step forward, then measure distance between sensor and object, then send these 2 values out.So, if you see the attached file, those numbers on the text box mean:

000032 -> 000: step number & 032: 32cm between sensor and object
001031 -> 001: step number & 031: 31cm between sensor and object
002032 -> 002: step number & 032: 32cm between sensor and object
003007 -> 003: step number & 007: 7cm between sensor and object
and so on...

So those are the numbers I wish to convert into graphics. The scan line would need to rotate clockwise at same speed of the step motor. And then I would like to display dots when an object is detected

View 3 Replies

Interface And Graphics :: Displaying Images On Mouse Hover In Different Window?

Jan 28, 2009

I am starting to develop a card game client for a CCG a friend of mine and I are creating.

I have 2 forms Client.vb and Hand.vb linked with a module.vb

In essence when the app starts up I see the client. I can then click the "Hand" button and the Hand Window is shown as well.

What my goal is is to have it so that when i hover over the card (picturebox) in my hand form that it displays a larger image of that card in the preview box (Another picture box) In Client.vb

I have everything working except when i actually mouse over the image in the hand form it creates an error:

Error:A first chance exception of type 'System.NullReferenceException' occurred in CCG 2.0.exe

The code in the mouse hover event:

Code:
F1.PictureBox2.Image = F2.PictureBox1.Image

Im Almost certain im going about this the wrong way but I cant seem to figure out any other way...

PS.I have attached an image to demonstrate what Im trying to do...

View 3 Replies

Interface And Graphics :: Anchors In Custom Controls?

Oct 21, 2008

I'm having some problems with custom controls and anchors today. I made a custom control containing a picture box and a vertical scroll bar. When I adjust the form the custom control outer area (the blank part) will adjust to the size of the form but the picture box and scroll bar do not. I have the picture box anchored to all sides and the vertical scroll bar anchored to the right side. They just will not adjust with the control when it is resized on the form.

View 4 Replies

Interface And Graphics :: Auto-Resizing Of Controls?

Sep 17, 2009

I have a project running in my old computer. It has panels,textboxes,labels etc. It occupies the full screen when running.I bought a new computer with a widescreen format. When I run this project it only occupies 2/3 of the screen.

What properties of the controls must I use so that I can run this program in any size computer and still occupy the full screen i.e the size is proportionately resized depending on screen size.

View 3 Replies

Interface And Graphics :: Rubberband Drawing Using Controls?

Jul 17, 2008

Im using VB 2005 express edition. Im trying to draw rubber band lines and rectangles using controls like buttons in one form. My problem is, i did the rubberband lines and rectangles on diff forms.Here's the snippet code for rubberband rectangle:

Code:
Private Sub MyDrawReversibleRectangle(ByVal p1 As Point, ByVal p2 As Point, ByVal dashed As Boolean)

[code].....

View 14 Replies

Interface And Graphics :: Accessing Controls Using Multiple Forms?

Aug 28, 2008

I don't know the best way to use multiple forms in VB, but I have created a problem and I'm not sure where it came from or how to fix it.

Background: I start the program at Sub Main. This is the main function:

Code:
Module modFunctions
Dim frmD As frmDAQ
Dim frmT As frmTrendView

[Code].....

it works, but I don't want to have to change the entire project.

View 1 Replies

Interface And Graphics :: Controls In Usercontrols Losing Properties?

Feb 5, 2010

The project I'm working on (the same one I'm always asking about) has tabs as the main navigation. I've made some User Controls to sit above the tabs in an attempt to reduce the number of overall controls that are being used (to great success). Now, however, there's one control that overlaps some controls on a tab that are obscured by my newest UControl and I want to make the background transparent.I've seen that AtmaWeapon keeps pointing people to this page detailing how to make the background transparent. That's great and it worked for me. All I did was create the

Code:Protected Overrides ReadOnly Property CreateParams() AsSystem.Windows.Forms.CreateParamsand it worked the way I wanted. Yay. I did write the rest of it too as well as part from a post I saw on the msdn forums, but they weren't needed to get the effect I wanted.However, I've got a number of PictureBoxes on this UControl that should have a BorderStyle of "Fixed3D". However, when this UControl is repainted the borderstyle doesn't reflect this (Note to self: don't .Refresh() a control inside its own .Paint() event ). This doesn't happen the FIRST time they become visible, but only when they've shown up and are made to redraw (like toggling visibility). If the border changes programmatically they look fine

View 1 Replies

Interface And Graphics :: Dragable Tool Controls / Forms?

Dec 7, 2010

I'm trying to figure out how to make dragable controls like the ones in paint.net. see the attachment. they look like forms kind of because they have the red x at the top like a form does, but it kind of looks like a custom control too. Is it possible to make these types of controls in VB.Net 2008.

View 2 Replies

Interface And Graphics :: How To Set Alignments Of Form Controls Dynamically

Sep 26, 2010

I have a form containing two panels. In both panels there are two labels and textboxes. I set the 'Center In Form' property of the labels and textboxes to 'Horizontally' and 'Vertically' in design time respectively. But as the form is resizable, when the size of the form is increased or decreased at runtime the controls are no longer center aligned in the panels. How can I handle this problem (provided th

View 3 Replies

Interface And Graphics :: Restrict A Controls Text Area?

Apr 8, 2009

If I have a control, in this case a button, can I restrict the area it considers valid for text?

In the attached image, the left and right arrows are custom drawn in the paint even, I also have a scroll timer that scrolls the text if the length exceeds the buttons width as measured by Graphics.MeasureString.

I want to restrict the text from red line to red line so when the text scrolls it does not interfere with the arrow indicators, can the text area be overridden to some custom region?

View 4 Replies

Interface And Graphics :: Drawing Dynamic Connection Between Two Listview Controls?

Jul 4, 2010

I am need to drag drop listboxes with connection line in vb.net. If the listbox move then connection line should also move. I have attached picture as wel

View 1 Replies

Interface And Graphics :: Optimizing Forms / Controls Background Images

Aug 1, 2008

I'm developing a VB.Net 2008 application which uses background images (in jpg format) in some forms and controls, but this makes the application to use a lot of ram. My question is how to make it to use the less possible.

View 3 Replies

Interface And Graphics :: Place Controls In ASP.Net Table For Formatting Purposes?

Aug 5, 2010

I am using Visual Web Developer 2008 Express and making a Webform. I want to arrange my labels and drop down listboxes in a table to keep them together on the form in a neatly manner. If I use the 'ToolBox' on the side and drag a HTML table to the workspace I get a nicely formatted table with 3 rows and 3 columns. And I can drag and drop my labels/listboxes into these columns and all is fine and good.

If I use the 'ToolBox' and drag a ASP.Net table to the workspace it starts as just a boarder with '###' inside of it, which I cannot drap and drop controls into. I'm not sure how to place controls into it. I figured out that you can add the Rows - then Columns in the properties window, but that just adds more cells which have the '###' in them. I can make it work with the HTML table, but I just want to know if I can do the same with the ASP.net table.

View 1 Replies

Interface And Graphics :: Repositioning The Controls In Panel2 Regardless Of Which Form Is Loaded?

Aug 15, 2011

I have a Main form that has a split container in it. In Panel1 there is a treeview control. Panel2 is initally blank when Main loads. Upon clicking on one of the nodes in the treeview a form will load in panel2 and adjust the location of the controls based on the size of panel2. The controls are all in a panel themselves so that I am only moving a single object.

Moving the controls when the form in panel2 initially loads works great. But if the size of the Main for changes then the only way to get the controls to reposition is to click on the treeview and reload the form in panel 2.Code for the tree.

Code:
Private Sub TreeView1_NodeMouseClick(ByVal sender As Object, ByVal e As System.Windows.Forms.TreeNodeMouseClickEventArgs) Handles TreeView1.NodeMouseClick
Me.SplitContainer1.Panel2.Controls.Clear()

[code]....

I tried to with code in the panel2_resize bit i got an error as soon as I clicked on the treeview as i did not know which form was currently loaded. What would be a method to accomplish repositioning the controls in panel2 regardless of which form is loaded?

View 3 Replies

Interface And Graphics :: Dock Or Anchor Controls So That They Resize Themselves Accordingly When Form Is Resized

Feb 12, 2011

we all know how to dock or anchor controls so that they resize themselves accordingly when a form is resized. It works fine till we have rows of controls on left and right size of the form. But what if have three columns (Columns as in visual sense. I'm not talking about any column control containing other controls) of controls? For example a form having a bunch of controls in the left side, a bunch in the middle and a bunch in the right. There may be a few more bunches in the middle. Now while resizing the form, I want the controls to resize accordingly as well as change their positions to make space for the previous bunch of controls that are resizing.I mean, while the user increases the form size horizontally, the controls of the second bunch should resize and at the same time they should move right because the controls of the first bunch are increasing horizontally too. When the user decreases the form size horizontally the same thing should occur in the reverse order.I can manage it somehow using nested splitcontainers but that's too cumbersome. I would like to know if there's some better way to achieve it, like setting some property etc.?

View 3 Replies

Upgrading Software Written In VB To Include More Graphics/controls/indicator For User Interface?

Feb 18, 2011

I have been given a project to update software written in Visual Basic. The software and some files are enclosed in a folder and was written 3 years ago. I have no clue what to do. All I have been asked to include more controls. The user interface allows user to select three processes by clicking on the buttons on user interface. The new requirements is to add two more buttons. There is not much information so I have to use only the resources available. When I tried to open the project, visual studio prompted to convert the project so its compatible with current version. I could open the project but dont know what to do from there. Please guide me towards the right direction. If the project folder is required please advise me how to attach it too.

View 2 Replies

Interface And Graphics :: E.Graphics.Drawstring Length Overflow Page?

Nov 19, 2010

Im working on a project that needs to print a report of one client.Everything went smooth untill i came across my multiline input text data.When i display it in the PrintPagePreview the text go's outside my page. Even when im printing it only the halve of my text is displayed. I googled and looked everywhere but i can't get a clear fix for it.

[Code]...

View 3 Replies

Interface And Graphics :: Passing Bitmaps & Graphics To Subroutines As Arguments

Jan 22, 2011

I used to program with Visual Basic 6, so I have alot of old programs that I'm updating, plus I'm learning the new VB2008 methods. I'm writing a program that replaces the old "BitBlit" function which is no longer supported by Visual Basic 2008. It involves three picture boxes, one holds the sprite bitmap, a second holds the mask (silhouette) of the sprite bitmap, and a third has a background image.

[Code]...

View 3 Replies

Interface And Graphics :: System.Drawing.Graphics.DrawString On Other Window?

Aug 14, 2009

drawing text on a window which is not the current form's window.I remember doing this in Win32 api with getwindowdc(handle) to obtain a DC for the Window, then textout() on the DC.

View 2 Replies

Interface And Graphics :: Create A User Interface In A Game Such As The Application XFire Using VB?

Jan 12, 2010

how to create a user interface in a game such as the application XFire using Visual Basic?

View 3 Replies

Interface And Graphics :: Use A Graphical User Interface That Contains A Drag And Drop Form?

Oct 19, 2008

I'm working on a design project where I have to use a Graphical User Interface that contains a drag and drop form. It consists of having a window dropped on a wall. Both of them are images to scale. I would like to know what kind of code I would have to use to show the x and y coordinates of one of the points of my window when dragged so when I drop it, I'm dropping in it on the desired coordinate of the wall.

View 2 Replies

Interface And Graphics :: Creating A Class Holding Some Graphics?

Jan 12, 2011

Ok, I want to create a class that will handle a special rectangle graphic.In my form, I want to have two of these special rectangles. So, basically, I need two instances of that class in my form, right?I manage to initialize two, alright. But, how exactly am I supposed tomanage drawing/graphics etc in a class, and the results to be displayed in my form?

View 13 Replies

Interface And Graphics :: Error - Graphics Paths For Designing

Oct 29, 2008

Using graphics paths for designing...but am getting an error when trying to add a shape to : _shapelist.add(createshape())

It says : Value of type 'system.drawing.drawing2d.graphicspath' cannot be converted to '1-dimensional array of system.drawing.drawing2d.graphicspath'

View 2 Replies

Interface And Graphics :: How To Procede With An Interface Design Approach

May 18, 2012

I was wondering if I could elicit some tips on how to procede with an interface design approach.That is. What is a good way to go about establishing a "work area" where one can have multiple "floating forms" in this area.Can you have a form which occupies the entire windows desk top and the other forms "float" in this space? the "floating" forms would need to interact with each other where pressing buttons etc on them would affect other forms on the "workspace") Or what would be a good way to start accomplishing that? Or is there a better way to get the same effect?

View 4 Replies

Interface And Graphics :: Link A Class / Object To An Interface?

Apr 21, 2010

I'm trying to make a .dll that contains a lot of basic functionality that a program can use. Currently i am trying to use interfaces to make a lot of this functionallity independend of the program using it but i hit a snag. The Basic idea is that a programmer will create his own object using the interface discribed in my .DLL file. Then implements those functions as he likes. He can then instanciate a controller (found in the same DLL) and sends his custom object implementing the interface to that Controller. The controller can then be started and will take over all the work. I do not know what type of object is send to the controller and idealy i want to program it in such a fashion that i shouldn't care as long as the object send implements that interface.In code I am trying to achieve the following: (quite simplyfied)

.Dll:
Code:
Public Interface MyInterface '<----Decleration of the interfaceFunction GetData() As Integer
Function SetData(Data As Integer)
end interface

[code]....

this propperly. I know that the second i set the interface adaptor in the Controller VS comes nagging that it can not be converted to a "MyInterface" Class. Obviously i am doing something wrong. I can change the datatype that the controller expects to the "MyController" type but that would completely ruin the whole idea of flexibillity. I am hoping someone sees what i am trying to do and can point out where i made the thinking error.

View 6 Replies

Interface And Graphics :: Picture Of Interface And Get Feedback On Changes For Easier Use?

May 21, 2012

Is this where i would post a picture of my interface and get feedback on changes for easier use? If not is there someplace on this forum or any other forum to do this?

View 1 Replies

Interface And Graphics :: Draw On Tabpage's Graphics?

Jan 19, 2011

So I decided to make my famous tile selector project, but instead of drawing in a form's graphics, do it inside a tabpage.Well, I managed to get it working, but it seems to... flicker.Normally, setting the form's DoubleBuffered property to True would help a lot there, but apparently, the tabpage has no such property.

When I invalidate the tabpage, I draw two images and fill one rectangle.Following past advice, those two images were created before, just once, and are stored in a variable so I don't create them every time I invalidate the tabpage.

View 1 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved