Large Data In A Cell Of DataGridView?
Sep 13, 2010i want to display a large data in a cell of DataGridView as multiplelines to avoid the horizontalscroll.
View 1 Repliesi want to display a large data in a cell of DataGridView as multiplelines to avoid the horizontalscroll.
View 1 RepliesI am working on a vb6 to vb.net migration project using vs 3.5. I have a datagridview.in a particular cell of this grid, user has to enter only numeric data. but after user enter data, itshould become concainated with a $ symbol (eg: if user enter 34, the cell value should become $34). And if he/she presses the hyphen ("-") in the key board, the data (ie. $34) should become -$34 and if again presses the hyphen button in key board, the data should become $34.
View 3 RepliesI need to extract data (an integer) from the last row of a datagridview cell, add a 1 to it and use the new value to store it in a new row.
[Code]....
My code is this:
Me.Validate()
Me.CFTINVENTORYBindingSource.EndEdit()
Me.TableAdapterManager.UpdateAll(CFTDataSet)
At first I can insert data into the cells and save it... but when I try to edit the same cell with data already saved in it I get this error...
sqlcelexception was unhandled
There was an error parsing the query.
[ Token line number = 2,Token line offset = 29,Token in error = , ]
I also get the same error when deleting an already saved cell with data.
I am updating my last post so hopefully someone will help. I have following code that will move a cell to the next column when hitting the enter key while doing an edit. It will even check the row at the last cell to validate data is present.
However, if there is no data in a cell and I press enter, the focus moves to the next line like it normally does. I need to prevent the user from moving or clicking on any cell until the cell they are on has data in it. Here is the coe I have used[code]...
I am working on a vb6 to vb.net migration project using vs 3.5. I have a datagridview.in a particular cell of this grid, user has to enter only numeric data. but after user enter data, itshould become concainated with a $ symbol (eg: if user enter 34, the cell value should become $34). And if he/she presses the hyphen ("-") in the key board, the data (ie. $34) should become -$34 and if again presses the hyphen button in key board, the data should become $34.
View 3 RepliesI am having a loading problem, the problem is my formating code takes way to long to load.
What I have is a datagridview that is loaded by one table and I want to format the cells based on data from another table, the following code works, but it gets slower and slower as I add more records to the data.[code]...
I have a datagridview with data in it, i have set it so you can only select the row and one at a time.However, i need to get the data from one of the cells in the selected row, i have tried this
View 2 RepliesI've been looking everywhere for an answer to a simple question, but i'm having issues, so i thought i'd join and post here. I'm having issues with a simple concept. I load information from a SQL database, and i want to add a 'Passport' link URL relating to column cells called 'name'. It basically selects the name, and inserts it into the link fields to be opened. But i cant find a way to work it. I thought i could do it with something like:
[Code]...
I am tring to send the data from Datagridview to Excel. Now the data sending is working good.But what i want is , In a datagridview rows having different colors.I need to send the data to excel with cell color or with Row color .
How can i send the data with Backcolor or CellColor or RowColor from datagridview to excel.
I am sending the Code which i COded for send data from Datagrisview to Excel as below :
[code...]
Have this code so that when a checkbox in a column of my datagridview is checked, then the corresponding cell in column 2 (of the same row the check box is in) will turn blue with font color white.
[code]...
I'd also like to add a line so that as well as the cell going blue, the bottom border of the cell disappears, so cellborderstyle = none.
I have a DataGridView with several columns. One column is a TextBox column named "Status". This column can only show one of three values: 'Final', 'Ready', or 'No Reportable'. I want to have some code that would turn the TextBox cell into a ComboBox cell when the user left-clicks on the cell to allow the user to choose one of these three options. When the user clicks elsewhere or the cell loses focus I want the cell to change back to a TextBox cell.
Here is what I have so far, but the code throws an exception indicated below Plus, I don't think the code would remove the combobox when the cell loses focus.
Exception: "Provided cell does not belong to this DataGridView control."
Private Sub dgvCalculatedResults_MouseDown(ByVal sender As Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles dgvCalculatedResults.MouseDown
Dim ht As DataGridView.HitTestInfo = Me.dgvCalculatedResults.HitTest(e.X, e.Y)
[Code].....
Is it possible to disable cursor moving from cell to cell in datagridview?
View 5 RepliesI need to display the column header and cell value of the clicked cell in the data grid. For example if I click Argentina from the country column, the text box will display country = Argentina.So far the code I have is, please help me figure out the code for displaying the information in the text box
Private
Sub
DataGridView1_CellClick(ByVal
sender As
[code]....
I wanted to implement the use of Enter key when entering data and moving from cell to cell. How am i going to implement that?
For example:
Text Box 1: Date: 02/02/2009
Text Box 2: Name:
then after entering the date on the text box i wanted to move to Text Box 2using only the Enter key.
I have a Datagridview called DgvReturns. which contains two fields,
1) Yes - checkbox (boolean)and
2) Received Date - textbox (DateTime)..
What I want to do at run time is that when a user Checks the Yes checkbox Received Date is populated with the current Datetime.
In cellEndEdit event I need current cell editedFormatedvalue ( well it is done) now my question is can we get the old value of the cell in this event or have to handle some other event for this means let I have a cell in which current value is abc and when I edit it it become def now I want to get both the values in cell end edit event ( or any else ) but finally I have to perform task on cellendedit
View 1 RepliesI have a datagridview and it has 8 columns as textboxcolumns. I am handling their cell validation with cellValidating event.
My question is that if cell validation fails for 3rd column of the datagridview then the focus should move from 3rd column to 1st column of the datagridview. How can i do this?
I have tried datagridview.column(0).selected = true, when validation for 3rd column fails, but this is not working. Focus still moves to the next cell. I can stop the focus to the current cell with e.cancel=true but i want it to move to the very first cell of the datagridview.
I have a datagridview and it has 8 columns as textboxcolumns. I am handling their cell validation with cellValidating event. My question is that if cell validation fails for 3rd column of the datagridview then the focus should move from 3rd column to 1st column of the datagridview. How can i do this?I have tried datagridview.column(0).selected = true, when validation for 3rd column fails, but this is not working. Focus still moves to the next cell. I can stop the focus to the current cell with e.cancel=true but i want it to move to the very first cell of the datagridview.
View 13 RepliesI have a DataGridView where Cell_Validating is being done. I have a Cancel button on my form that allows the user to exit out of the DataGridView changes. The problem is that if a cell was currently flagged as in error, I cannot exit and remove columns from the DataGridView. I get the following error: Operation did not succeed because the program cannot commit or quit a cell value change. Is there a way to cancel the validation once the focus has been removed from the DataGridView? Here is my Cell_Validating
[Code]...
I've a datagridview with a multiline textboxcolum, if the cell content is small (one line) the scroll works fine and I can see the content of all rows. But, if a row cell content is very large (ten lines), only is visible the top of the cell and if I try scroll down, the scroll goes to the next row without can see the rest of the cell text, even using the arrows for move inside the cell, the bottom is not visible.I was searching in the web and the only solution is use panel and put inside the datagridview. It looks me a fix more than a solution.
View 1 RepliesWhat I am trying to do is to instantly apply a filter to a large list of data such that the list is updated almost immediately regardless of the number of items in the list. I have this working using a listview right now but it is far from instant, a list of 5000 items takes over a minute to get through. What I do currently is to maintain a cache of my data that my listview entries are based on. When the user selects a filter I parse this data one item at a time and determine if each item should still be displayed in the listview, if not I remove it. The complexity of determining whether or not a data entry meets the filter requirements is O(1), but just getting through each element in a loop takes significant time, and so does updating the list view graphically at the end of the process.
I have considered using a datagridview instead, using a database connection. I have never done this before and my main question here is whether this would allow me to do what I have described. With the database I could form an SQL query to return only the items that meet the new filter requirements... but would the data in the form update immediately, or would there still be significant delay?
I have just found that if a DataGridView image column's size (height & width - in pixels) is smaller than the image's original size (in my case all images are exactly 180 x 180 pixels) at the time the cell is populated then the image is automatically being converted to a lower resolution I assume to fit the image completely within the size of the cell). How can I stop the automatic scaling of the image?
The image below show the same file displayed twice, both at 60x60 pixels ('Thumbnail' column) and a blowup of the image (PictureBox populated via the CellMouseEnter event) to it's right. You'll notice the resolution of the first blowup is far less the the second. so, what made the difference in the resolution of the blowups is? In the second blowup's case I'd first stretched the image column's width to ~180 pixels and set the row height to match (via the ColumnWidthChanged event) then populated the DataGridView then stretched the image column to 60 pixels (its minimum).
I want to write a program to do Markov chain, but my states are quite large. First of all I calculate all the transition probabilities and revenues for all states(1381860 total states), and store in a multidimensional array. Public RevArr(0 To 9, 0 To 750, 0 To 282) As Long
After that the iteration of markov chain should use these as inputs to calculate the steady-state probabilities. But when I try to run the main code I got this error.Exception of type 'System.OutOfMemoryException' was thrown.
The following is the declaration of second array I add just another dimension for storing all the iterations, but I get this error. Dim stateprob(IT + 1, 0 To 9, 0 To 750, 0 To 282) As single
I have a large data.DataTable and some formatting rules to apply.For example, the LASTNAME column has a value of "Jones" but my formatting rule requires it be 10 characters padded with spaces on the right and uppercase only. Like: "JONES "My initial thought is to loop through each row and generate a string. But, I wonder if I could accomplish this more efficiently with a DataView, LINQ or something else.
View 1 RepliesI'm searching the same title "Large amount of data in ComboBox" last 1 and half years but I could not get what I'm expecting! Here is my case, I have 20 thousand unique products, I just fill into dataset & bind only two columns in the combobox for searching & validating the product if it is exist in the product list or not.
1) I read about dataset but all articles are described "Dataset only for few records because it is sitting in-memory". If I fill few records (100 or 1000 products) into the dataset, how can I search & validate REMAINING (NOT FILLED) products?
2) Is there anyother way without filling into dataset and bind to combobox? Can anyone suggest me which is suitable for me?
I am working on a program for a customer and am working in VB2010 in VB language. I have two rather large files that contain data. File #1 is over 300,000 lines of data. File #2 is over 100,000 lines. The files are CSV text files. On a User Form, there are two values, "StartTime" and "StopTime". This is the process I am doing:
1. Read both files into ArrayLists
2. Get item #1 of ArrayList #1 (we'll call this "A")
3. Get item #1 of ArrayList #2 (we'll call this "B")
[code]....
I have a large amount of data (400 variables recorded 2 times per second) which is output from a factory monitoring system. It is stored in encrypted files in blocks of one hour from which i can extract to csv with a small piece of software.I would like to upload these csv files into a single database from where i can make graphs, analysis or whatever over longer periods.
The csv files have one line of data per 'time stamp', each of which can be conceptually segregated into approximately 15 individual pieces of equipment.I can quite easily import the data into a single table. However, i find that, very quickly, i end up with an enormous file (about 700mb/month) which is extremely ponderous to work with.
is it possible to split the table into 15 separate tables related by 'time stamp' and second, can each of these separate tables be saved in separate files in storage memory (such that only the files with the desired data are imported into ram).
I have a listview control in my form which contains 44 columns. When user clicks on particular node in the 'tree view' it loads corresponding records to the listview. If the number of records is less then it works fine, but if there is more number of records then it takes more time to load(very slow).
View 4 RepliesI'm working on a project at the moment, where all the data being loaded is kept in an XML file which until now have been rather clean with structures such as
Code:
<Textures>
<Texture id="1">TerraingrassDirtNW.png</Texture>
[code].....