Somewhile back I got into the habit of manually line numbering my routines (in access) - yes just like it was in the 80's ... :)Only because it's seriously helpful in error trapping where reference to specific line numbers pops up in my trapping routine. (as a comment I am surprised by the number of apparent learned folk who ask the question why one numbers lines !!)I am now Fed up with doing it manually
View 3 Repliesi am creating a tabbed text editor. i want to create a line numbering on a richtextbox but i cant figure it out. In the design time, The only control is the tabcontrol1. and in when the form loads, the tabpage and the richtextbox is created through
Private Sub AddTab(Optional ByVal file As String = Nothing)
NewRTB.AllowDrop = True
NewTab.AllowDrop = True
[code]....
I have two RichTextBox's; rtb1 and rtb2. I want to convert the contents of rtb1 to rtb2, but add a number at the start of each line.
So from:
[v]hello[/v]
[v]goodbye[/v]
To:
1. [v]hello[/v]
2. [v]goodbye[/v]
VB.NET
Private Sub btnProduce_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnProduce.Click
Dim List As String = rtb1.Text
If (chkPrefix.Checked = True) Then
List = Replace(List, "[v]", ". [v]")
End If
'Display new list
rtb2.Text = List
End Sub
in richtextbox i can set the bullet like this
rtbMainBox.SelectionBullet = True
how about the numbering?
This question was there about 8 years ago, now I'm having the same problem with Urmel and still there couldn't be whenever I load data into my DataGrid (RowHeadersVisble=True), the RowHeaderCells are empty but the selected one that has an arrow. Is there a way to show the RowNumber instead of nothing or the arrow?
View 2 RepliesHow do I make my numbering in RecordNumber1 tool in CrystalReport1Starts from 1 to 10 and then repeat from 1 to 10 and so on to the last
View 1 Repliesnumbering rows in datagrid. I have a column that should number 1,2,3 so on when adding a new row. When I delete a row, those numbers should re-number still to 1,2,3. So when I delete row 2, the row that's been added as 3 should now number to 2. Then when I add new rows, these should re-number again, and so on..
My code:
'when adding a new row
Private Sub btnadd_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnadd.Click
[Code].....
My problem is with the for loop when deleting a row.
I have a listbox2 and it is bound to my ms access database. I want to number them using listbox1. Example
[Code]...
** the listbox1 must automatically number the items depending on how many items inside the listbox2. -I already know that i can make it by creating autonumber in ms access, for certain reasons i cant do that.
I conected my access database with the form and I need the code to count how much entries are in the database and increase that number by one, and then to write that number in one textbox so that when I press save in the form the entry would have that numbar as id.
View 7 Repliesi have made an invoice that is printed the total amount of things bought but still i have a problem of making it such that at each time i print i prin each invoice numbers itself as the following one.
View 2 Replieshow to open an excel file and number the rows. The xls file is just a simple 2 column file with 5000 or so part numbers in column B. I need to open it, add numbering to the rows in column A ranging 0 thru 9, then start over at zero again.
i.e.
0
1
2
[Code]....
I want create a datatable .In this datatable 2 coloums are percentage and marks I want to show the maximum percentage record display on first and simultaneosly another racord ?Thats why i take a dataview but dataview could not sort the datatable
exam.
Dim view As DataView = dt.DefaultView
view.Sort = "clm_percentage DESC"
dgvStudInfo.DataSource = view
I want create a datatable .In this datatable 2 coloums are percentage and marks .I want to show the maximum percentage record display on first and simultaneosly another racord ?Thats why i take a dataview but dataview could not sort the datatable exam.
Dim view As DataView = dt.DefaultView
view.Sort = "clm_percentage DESC"
dgvStudInfo.DataSource = view
I am using the vb 2005 to create an application and I created a database from the vb by adding a new Item (Database). I want to know how can I make the id which is a number, to take an auto number and not to have to enter it with my insert statement. I know in oracle I use a sequence and in access I use Auto Number as a type for the field, I want something like this here.
View 2 RepliesHow to delete repeated and numbering words from the text?
For example:
* in red: Words / numbers repeated
* my textbox:
" test1 test1 bb what how bb so and then yes so then so 1 3 1 4"
to get this result:
*in green: The number of times the word / number show in the text
so (3)
then (2)
1 (2)
Test1 (2)
bb (2)
what (1)
how (1)
When I add a new row to an access database, I would like the primary key to be automatically incremented and entered. I've got this to work using a sql database, but it doesn't work with access for some reason. The following code works if I give the code a value for "@key" which is my primary key column. If I leave it out I get the error "Number of query values and destination fields are not the same". I don't want to have to supply the primary key, I want it to generate automatically.
[Code]...
In the database the primary key is type "AutoNumber". Does anyone know what I'm doing wrong?
Following on from my last question, are the AssemblyMajorVersion, AssemblyMinorVersion,AssemblyRevisionNumber and GenerateRevisionNumber properties required in .vbproj files?
All of our components have these entries in the .vbproj files but they are completely out of sync with the AssemblyVersion and AssemblyFileVersion entries in the AssemblyInfo.vb files.
Are they a legacy from the upgrade from previous VS versions?
what i need to do is open a txt file, read line by line, decode each line into an array and display. Now all works ok apart from one line.
sTextLine = objReader.ReadLine() <-- Value of string cannot be converted.
full code here
-------------
Dim objReader As New System.IO.StreamReader(sOpenFile.Text)
Dim sTextLine As New ArrayList()
Dim sText As String = ""
Dim i As Integer = 0
[code]....
how to read text from a listbox line by line and put current line in a label?
View 3 RepliesHow would i go about reading a file Line by Line that within that line The values are delimited by " Example of the data:
"bob" "cat" "1243"
"steve" dog" "6789"
I've started this with this code but not sure how to go about the next stage:
Using MyReader As New _
Microsoft.VisualBasic.FileIO.TextFieldParser(My.Application.Info.DirectoryPath & "Records28112011.jd")
MyReader.TextFieldType = FileIO.FieldType.Delimited
[code]....
I am trying to read in a TextBox line by line and take the first 7 characters of each line and output everything in another TextBox.This is what I have so far.
Dim line, lines() As String
lines = TextBox1.Text.Split(Environment.NewLine)
Dim i As Integer = 0
[code].....
i need the app to preview the line in textbox in timeintervalof 1 s (can be change)nd when it will reach to the end it close the text file and andreread it after let say 1 m ..
Private Sub Button3_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button3.Click
Dim myStream As Stream = Nothing
[code].....
a user copies multiple lines of text (say, from an email) into the clipboard. Based on my observations, when one tries to paste the text into a single-line textbox, only the first line is actually pasted in. (I am aware that the "obvious" solution would be to set the Multiline property to True, but there are reasons I am looking to avoid this and to put multi-line data into a single line.)
In the TextChanged event handler, I wrote code that parses the clipboard data to successfully convert it to a single-line, comma-delimited format.
Private Sub txtMassTrackingNo_TextChanged(ByVal sender As Object, ByVal e As System.EventArgs) _
Handles txtMassTrackingNo.TextChanged
[Code].....
Is there a way to show the line number of the line of code that caused an exception within a Try...Catch block?
View 5 RepliesI'm trying to read a file line by line into an array but It skips the item at index:3 I have it msgboxing just to make sure and it wont even touch it.
Dim Btn As Button = DirectCast(sender, Button)
Dim path As String = Application.StartupPath & "Libraries" & Btn.Text.Replace(" ", "_") & ".ipt"
Dim i As Integer = 0
Dim lines As String() = IO.File.ReadAllLines(path)
[code]....
How do i read through a textfile line by line checking for and removing duplicate values?
View 1 RepliesI'm having trouble with reading a .txt file line by line, converting it into a string, then putting it into a listbox. When I execute I get an error saying "IndexOutOfRangeException was unhandled" Here is my
[Code]...
i would like to store contents from a text file line by line to arrays before copying them to another text file. what i have is currently like this:
[Code]...
Currently I'm only able to store the whole content into one variable, would like to store the content line by line in arrays.
Is there an easy way to consume xml to access any of the nodes directly without reading line by line?Here is a sample set of the xml working with. It contains two records of data. I am trying to find a way to load it so if I wanted to get say PostalCode and say Site SID value quickly.
HTML
<?xml version="1.0" encoding="utf-8"?><MainSite><MainSites Found="201" Returned="20" Status="0"><Site SID="123456"><Relevance>0.985</Relevance><Title>JDoe</Title><DateModified Date="2010-01-29T01:05:00">1/29/2010</DateModified><DateCreated Date="2010-01-29T01:05:00">1/29/2010</DateCreated><PersonalData><Confidential>0</Confidential><Name><First>John</First><Middle>
[code]....
i have three textbox in my program
How do i update my textbox3 Data like this
textbox3 line1 = textbox1 line1 + textbox2 line1
textbox3 line2 = textbox1 line2 + textbox2 line2
textbox3 line3 = textbox1 line3 + textbox2 line3
textbox3 line4 = textbox1 line4 + textbox2 line4
textbox3 line5 = textbox1 line5 + textbox2 line5