I want to set the DataSource Property of a listview and of a combobox to an array of datarows.
This is the Code:
[Code].....
The 'Name' column does exist, but the ComboBox shows only the type of each datarow not the contents! If I set the datasource to a datatable, the correct column is shown in the combobox/listview.
I'd like to partition my search results (which is in a DataTable) into groups of say 100 so the user navigates through them a chunk at a time.I thought I could bind an array of DataRows to a DataGridView as the DataSource but it just does not work. This is the code I tried
DataGridView.DataSource = (From r In DataTable.Rows Skip 200 Take 100).ToArray()
I'd like to stay away using the DataGridView's VirtualMode.
I am getting array of selected datarows from a datatable.select.I use the commands below to get that array or datarows
Dim foundRows() As DataRow
strExpression =
Here is what I tried.I have looked at examples by MS but they all just write to the screen and I have no interest in that.
For Each rowWork In foundRows
dtWork.Rows.Add(rowWork)
Next[code]....
"LineOfBusiness = 'CPP'"
foundRows = modXchange.pdtWork.Select(strExpression)
Now, I want to place the rows from foundrows into an empty data table.I did what I thought was the obvious but that only returns a bunch of rows with no data
I list folders in my combobox but I'm trying to sort the folders alphabetically and then numerically or vice versa.
My coding to populate my combobox is
With Combobox1.DataSource =
(From folder In New IO.DirectoryInfo("Path").GetDirectories
Select (folder.Name)
).ToArray
End With
Is it possible to sort the combobox?
I have folders that are numbered like 1, 50, 115, 189 etc.
These should display as
1
50
115
189
however they display as
1
115
189
50
I have defined a datagrid which has combobox in one of the columns, is there anyway to modify the datasource of the combobox (the source of the list) at run time?
View 2 RepliesI am trying to get the valuemember of my combobox but it just won't work. I have tried a lot of things (won't post them all here) can somebody just show me how to do this?
Private Sub cmbGroup_SelectedIndexChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles cmbGroup.SelectedIndexChanged ' Get valuemember here End Sub
I have a ComboBox that is bound to a List(of T).Now I type-cast the ComboBox.DataSource into List(of T)and add some more elements in the List.The items collection of the ComboBox doesnt get reflected and the new element does not show up in the ComboBox. Am I missing something ?
View 3 RepliesPrivate Sub UsernameEdit_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Dim sqlconn As New SqlConnection
sqlconn.ConnectionString = "stuff"
[code]....
The combobox just populates with "System.Data.DataRowView" I know it is some command to read the correct data out of the table, is it setting up something like:
dim i as integer
for i = 0 to CompanyNames.length-1
companyadapter.fill(companynames.rows(i)]
next
just curious what happens when i set the datasource of a combobox or datagrid or what-not to a dt then when i want to change what's in the combobox etc., i just set the datasource to a new one. i am cleaning as i go but just want to know what happens to the old datasource:
[Code]...
I have a combobox which i am binding to a sortedDictionary list, so it displays in ascending order. My question is, I need to display "--Select--" as the first option. Is there any way to either:
1) add another item besides for the datasource
or
2) add an unsorted item to the top of the sortedDictionary
I'm trying to use reflection with LINQ on a sub that set datasource of all my ComboBox:
Usual Method:
' ACAmp Panel
cboACPanelAmp.ValueMember = "IDACAmp"
cboACPanelAmp.DisplayMember = "Description"
cboACPanelAmp.DataSource = m_Entities.ACAmps.OrderBy(Function(c As ACAmp) c.SortOrder).ToList
Want to use that sub
FillCbo(cboACPanelAmp, "ACAmp")
Private Sub FillCbo(ByVal cbo As Infragistics.Win.UltraWinEditors.UltraComboEditor, ByVal entityName As String)
cbo.ValueMember = "ID" & entityName
[code]....
I can't figure out the last part of the last line, the LINQ
I have to add item "Final Grade" to my cboQuarter. The thing is, my cboQuarter already has a datasource and I can't add the item "Final Grade" during drop-down. The error says, "cannot modify or insert (can't remember word by word) when it already has a datasource."
View 4 RepliesI have a 2 classes, one is Employee, the other is Employees. Basically Employees is a collection of Employee, I have a combo box where the Datasource is Employees.
When the user selects a value from the combo box, How do I get an Employee object from whatever is selected?[code...]
It is an Infragistics combo box by the way.
Appropriate Title would be: Bind comboBox Tag to database.I have a comboBox on form which is bounded but and I need to populate it manually. With some reading on net i have found a way but it is not working
I can populate my combo, select item in combo, update database but the problem is when I load my form it displays empty combo (combo is fulled with my custom data but nothing is selected it must select correct ItemText) and after selecting a value in combo, the value disappears as soon as combo losses focus .
[Code]...
Is it possible to BOTH set a comboboxes datasource AND databind the selected value?Ihave 2 comboboxes on a form that I want to populate with data from 1 table,ut I want the actual selected values on each of the comboboxes to come from separate columns n another datasource Right now if one combobox changes, so does the other if that makes sense.
Here's a sample of code:
'Bind DataSource
With cboYields
[code].....
public Enum ClaimStatus
Ongoing = 0
Completed = 1
[Code]....
With code above, how do I assign the value to the combobox while retrieving data from the table so that it point to the corresponding combobox item. For example, if the value of status_ID is 1 then the combobox should show "completed" in the datagridview.
I am using code similar to this to populate a combobox with items from a database. The display works fine, but when I try to get the combobox.SelectedValue it is returning a DataRowView, where I need an integer. Obviously this is becuase I haven't casted the value to an integer, but the function, CInt(cboPosition.SelectedValue) is throwing an InvalidCastException. Is there any way that I can get the ValueMember's type to be an Integer?
Dim cn As New SqlConnection(CreditDisputesLogConn)
Dim cmd As New SqlCommand("CustomersLookup", cn)
Dim da As New SqlDataAdapter(cmd)
[Code]....
How can I get an item value from a Combobox using a datatable as it's datasource? Here's my code for constructing the combobox. This code works, that's why I'm not showing it all, but I want you to know how I'm creating the combobox.
Try
query = "SELECT category_id, name FROM categories ORDER BY name ASC;"
dbCommand = New MySqlCommand(query, dbConnection)
[Code]....
I want to display what is the item you physically see in the combobox that you select.
I have this controls
ComboBox: list of myobject
TextBox: view a description
DataSource: list(of MyObject)
MyObject:
property id as int
property combodesctription as string
property description as string
What I want: I set the datasource of combobox with list of MyObject when I select a value on combobox, I would like see description in TextBox is it possible bound text property of TextBox to same datasource of combobox or it is possible change description of TextBox only with changedEvent of ComboBox?
I have a ComboBox which is bound with a DataSource from (obviously) a Database. However, there are 659 different entries inside this Database and I was hoping to tack on AutoComplete.
I tried setting the Source to the ListItems since, after initialization and the data is bound, all the items necessary are in fact inside the ComboBox so I had assumed that it would pick that up. I was wrong. I tried using a Custom source but VS errored out saying that I couldn't do that since the ComboBox was bound.
My question is, how can I utilize AutoComplete's "Suggest" mode with a bound ComboBox?
I've gotten to a point where I'm trying to add a ComboBox to a UserControl, and to populate it from a collection which exists in code.
I've been getting along pretty much on monkey-see-monkey-do coding for the most part; copying and adapting existing code in order to get the next stage working, but this DataSource stuff has me stumped. I've been through a whole bunch of articles on MSDN this morning and am no closer to understanding than I was when I started.
Let me go through a few of the things that are messing with me, and hopefully you guys will be able to point me in the right direction:
1) None of the [UserControlName].vb files contains any code. All of the code for the UserControls is stored in [UserControlName]Model.vb files, and then code of the following sort is used:
<UserControl
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:l="clr-namespace:MySolution"
[Code]....
1.5) (using bullet points means I can't use <> brackets or code blocks later on. What the hell, markdown?) Anyway...
2) I'm pretty sure I only want a Static Source for the moment, as the items in the ComboBox aren't going to change during execution, at this time. Problem is, all the articles I can find about this are gigantic, complex things about creating XML readers, and populating DataGridViews and sorting data, and on and on and on. I just want to declare that I'm using a frealing List! A List I've already created in code.
So, yeah, I basically need to use a Public Property ComboBoxLines As List(Of String) from a class which isn't the same class as the UserControl itself as the DataSource for a ComboBox.
I have a bound datagridview which populates from the database using parameters. I've added a combobox column through the datagridview properties. How do I access this combobox column datasource?
View 9 RepliesI'm trying to assign a datasource to a ComboBox control during runtime. When I do so, I get the attached message. Here is my
cmbAddressDesc.DataSource = dbDataSet4.tblAddressCodes.addrDescColumn
dbDataSet4 is a typed dataset. I want to learn how to use an Interface. The error message is suggesting using an IList. How would I do this. I'm having trouble finding good documentation on this.
I'm creating a dynamic combo box and adding to a form. I'm trying to fill the combo box with a DataSource from an ArrayList and then selecting an item in the combo box based off a value from a property.Problem is, the combo box items don't get bound until after the Form_Load event has finished and the form is visible. So the combo box is empty when I try to set the selected index of the combo box. See code for what I'm doing in detail, and refer to comments in
[code]...
How to select the right selected index for combo box without a hack (Load timer or something stupid like that)?
I am using a combobox which is connected by data source with a table. On this table I do a Select distinct with some filters. Everything is fine except the fact that when I click on the combobox and dont select a value the app hangs until I select one value.Sometimes I have this error, sometimes no.I call the value by the sub load:
[code]...
I have a custom collection which is derived from a base class implementing IEnumerable and IEnumerator, this collection is populated with custom objects.I'm trying to set the datasource on a ComboBox on a WinForm to use the above collection - but when the code is run the ComboBox is always empty.
The code I was using was this:
Private Sub ViewSources_Load(sender As System.Object, e As System.EventArgs) Handles MyBase.Load
' declaration
Dim sourceCollection As SourceCollection
Dim source As Source
[code]....
I have setup a datagridview with one column as a combobox and bound to a dataset.
However, during runtime I want to refresh that column to show the changes. How do I do that?
can i use Datasource Wizard dynamically in my application..Is is possible..open vb.net windows application..then take one combobox..Then goto combobox properties ..Then select Datasource and click on ADD project Datasource..It's open One wizard (Datasource configuration wizard).Now come to my application.i am developing one designing tool..in my tool also having combobox..i am setting all the properties to combobox ..all are working fine..but This datasource property is not working fine..i can use this DataSource Wizard Dynamically to my combobox Datasource property...This is the code i use for setting the property..
Private MyDataSource As Object
<Browsable(True)> _
<Category("Data"), AttributeProvider("System.ComponentModel.IListSource")> [code].......
I have a form where I have to use control arrays to create a multiple input form i.e. rather than processing one transaction at a time up to 16 transactions must be processed. The following really havent given me much problems at this moment labels and textboxes. I use a for construct to create all the controls including a combobox. This is where my question comes in this form combobox has to be linked to a table in a database. But furthermore and this is where it gets complicated for me anyway each seperate combobox must move independly if i select row 5 in the table in combobox 4 combobox 5 which is havent touched should still be on row 1. How do I accomplish this. I'm using a webservice. I have tried passing a loaded dataset . The code that loaded the dataset is as follows
Dim DSInfo As New Project1.localhost4.AccInfo
DSInfo.Credentials = System.Net.CredentialCache.DefaultCredentials
InformationData.Merge(DSInfo.GetBusinessJournals)
[Code].....
this code doesnt however provide a link to the table equallly creating a dataset in the combobox method ,loading it and then setting it as datasource also provides no link. I know i'm missing something.
I have a combobox where the SelectedValue on the combo is bound to a property on a business object.Everything works fine, but the property that's bound to the SelectedValue on the combo only gets updated when the focus leaves the control. I understand that the property doesn't get updated until the control is validated (loses focus), but I need it to update the datasource as soon as the dropdown is closed.I know I could probably leave focus from the control on the DropDownClosed event but I'd prefer something a little less kludgy.What's the best way to immediately update my datasource when the dropdown is closed?
View 2 Replies