In my application, i want to make the user write the code by himself. Like, he have a textbox, there he is going to put the code like, msgbox("Hello") then when he press the button, the msgbox will open.
View 1 RepliesI've uploaded in SkyDrive my project to give a better picture of my problem:Cascading Combobox works just once in _SelectionChangeCommitted, and, DataGridView do not follow 3rd Combobox filter?
View 2 Replieshow can I make a TextBox follow the mouse cursor on a simple form?
View 2 RepliesI'm making a minigame where the user moves their mouse around a picture and a little image of a stick figure follows that image. I've got part of it to move, but it only moves up and down. I've tried to change the code to go by width and height but it wont go into debugging even though it shows know error.[code]...
View 4 RepliesIn VB.Net with Winforms how do I make an image follow the cursor even when it leaves the form? I want to do this during a drag and drop operation. BCL and/or GDI is better for my usecase than P/Invokes.
If you are familiar with PeaZip, it does something of this sort when dragging a file from it's interface.
How Can I make a PictureBox follow my mouse when a MouseDown happens? When I click the left button of the mouse on the picture I want it to move with the mouse until the MouseUp.
View 2 Repliesis ther any way to make my screen follow my sprite? I want the visable area of my game to change when my sprite moves past this X value 284 but i can not figure it out ill post my VB Express code below
Code:
Public Class Form1
Dim Y As Integer
[code].....
what is the easiest way to make a picturebox follow a path determined by waypoints? without using like 100 if statements and timers.
View 6 RepliesHow to make the form follow the cursor or mouse smoothly?
View 9 RepliesI'm working with a project that is WPF and VB.net. I want to visually simulate "dragging" an object (though I do not want to use standard drag and drop for reason of purpose).Basically, I have a label object that, on its MouseDown event, I want it to follow the mouse cursor inside a 640x480 solid-size grid (but not outside of it!). Mind you, this grid is centered inside a full-screen window. Again, the object should not follow the mouse outside of the grid (I'm guessing a "ClipToBounds = True" here)Then, on the label's MouseUp event, I want it to either stay in its current position or return to its original position, as determined by the value of a boolean variable set by another object's MouseEnter property.Note, if it would be easier to work with, I can change the grid to a canvas in a cinch. I'm guessing that would be desirable.
How do I make the object (label) follow the mouse cursor inside the grid/canvas, but not outside of it? This needs to happen on the MouseDown event of the label.How do I make the object "stick" in its current position? (From this, I can probably figure out how to make it return to its original position on my own.
I've come across a very basic problem which I'm sure has a basic answer.Forgive me but I haven't programmed in years and this just a hobby of mine..My problem is that I need a drawn object (say an ellipse) to move to the cursors location when I click. Imagine an adventure quest style game where you view your character in birds eye view, and it moves according to where you click on the map.I can draw the image fine, and move the image around fine - it's more so the formula I'm using which I'm a little stumped on.I have certain requirements though.
1. I need a timer that constantly updates the drawn object's (lets say character from now on) location. Each tick will essentially be the character taking 1 step towards the cursor's location.2. At the end of each tick of the timer, it'll will invalidate the form/control to invoke the paint event, and of course, the objects location will be be updated.It sounded simple enough to create a linear equation based on the objects original location and the location of the cursor when I click.However, that will not give it a fixed speed.If say for example, the gradient (rise/run) between the cursor location and objects location is very steep, the object's y-velocity will be greater than that of the x-velocity
I am new to vb 2008,i am trying to make an application to calculate molarity(chemistry).[code]...
where M1 and M2 are Molarity and V1,V2 are volume(all variables).
so for my application i have made four textbox and a button.Now what i have done is my application only can find one variable M2 when provided other three values[code]...
I am try to make a character that follows the mouse, but I cannot find any way in vs 11 to get the mouse coordinates? It is a vb application, could someone please help me out? I tried pointer.location, pointer.margin, but still cannot do it.
View 5 RepliesI'm trying to make a program to send a command through a textbox when a button is clicked, THEN grab the output and put it into another texbox. If you could help i would be great full. This is what I have so far....
Public Class Form3
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Shell("C:DFUs-irecovery.exe")
[code]....
How to make when the program loads to give 1 textbox to enter password: if they enter wrong password to give them message that the password is not right and to try again..if the password is right to open the corect form.can someone help me with that i have made 1 keygen program and i have insert there the keygens and to make the program to has more than 1 password inside to check
View 1 RepliesI am trying to make a picturebox follow another picturebox. But I also want this picturebox to be able to collide with the other picturebox if the picturbox stops. I hope this is not too confusing. I cannot figure this one out. The code below is probably nothing like what I should be doing, but i cannot think of any other way to do what I want.
PictureBox1.Location = New Point(PictureBox2.Location.X)
PictureBox1.Location = New Point(PictureBox2.Location.Y)
Hi, I'm working on a program that reads text entered into a textbox and creates a list of items by separating entries by commas. Everything is working fine, except, because I am using an array to store the items in the list, I have a limited number of entries. This is only a problem because, as it is written currently, each comma counts as an individual entry. Therefore, users can enter ",,," for example, and it would use up 3 places in the array.
I'm looking for a way to check to make sure there is text after the comma before adding an entry. I've attempted to use the .substring command to check the character after, which works until it gets to the last character. Because there is no character after that, it will give an error.
Here is my code for extra clarity:
Public Class frmMain
Dim intCounter As Integer 'Stores the # of commas in the string
Dim Messages(49) As MessageProperties
[code]...
im trying to make a program in which if the textbox text and the listbox text are the same order, which they are in the picture, a bluie fonted text saying well done appears. However only the red text appears which is only meant to come when the order of the text in both listbox and textbox isnt the same.
Here is the code that i used for this:
listarrays = name of listbox
textbox1 = name of textbox
l is the name of the label for correct answer(blue font)label3 is name of label with red font which should only appear for wrong answer
Dim text As String = Me.TextBox1.Text
For Each item As Object In listarrays.Items
If item.ToString = Me.TextBox1.Text Then
[code].....
use another textbox instead of the listbox but thats just making itmuch harder for me as I already made the full code working with the listbox. My lecturer told me i need to convert both in string so both textbox and listbox are compatible and i did so (see code above) but the correct label doesn't show?
I want to make a function in VB 2008 with which u can make a textbox change some letters within the textbox when u click a button. So example: Textbox1 has got in it: url...Then when I click button 1, it has to change ....
View 8 RepliesIf we won't know what Exception will be thrown then why cannot we catch a general exception? I just cannot follow this and some more.
View 14 RepliesIf we have a htmlanchor element. Is there an elegant way to know whether the link is no follow or do follow after taking into account that tag and context of the links.
View 4 RepliesHow to make validations for textbox allow numbers only or textbox allow letters only?
View 14 RepliesI have anchored textboxes to follow form resizing but buttons stay in the same place :/ Any ideas? (Sorry if this is a "Noob" question)
View 1 RepliesEarlier I was working on a project, and I added a StatusToolStrip and the the ToolStrip I added a label and a progress bar. The label will say the current sub or function that is in progress and the progress bar will show how far along it is through the sub or function. I have tried this myself but I cannot figure it out as I rarely use progress bars.
An example of a code that I would like the progress bar to show would be like this:
Private Sub StopServer_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles StopServer.Click
'Checks to give server notice
If My.Settings.warningmessages = True Then
Dim cmd As String = My.Settings.warningmessagetext(2)
[Code] .....
So while the sub is running the label would say "Stopping Server" and the progress bar would show how far along the sub is.
I have a short little program that has an image follow my mouse cursor. But the problem is that the image keeps drawing itself over and over. I only want 1 image following my mouse.
Public Class Form1
Private Sub Form1_MouseMove(ByVal sender As Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles Me.MouseMove
Dim myBitmap As System.Drawing.Bitmap
Dim myGraphics As Graphics
[Code] .....
i want to make a custom mouse cursor but I found that can be hard so I want to go the next best route. I want to see how you make an image follow the mouse pointer. I assume it would use some kind of image = mousepinter new point (x, y) or somethign like that. Suggestions or samples? In the end i want to take this code snippet and make a duck hunt game and a whack a mole type game
View 10 RepliesI am ready to deploy my vb.net project to my client computer.In my development computer I have crystal report 9, sql server express and .net frame work 3.5 installed.My Client computer hasn't got anything installed there.I am trying to making msi installer so that it will be easy for my client to install.I created the new solutions -> setup type project, added the project on it and build it.it successfully created the msi installer but it doesn't installs the sql server express and crystal report.How do i make the installer with crystal report and sql server and also with db
View 1 RepliesI have an object that looks like follows:
Public Class MyObject
Public Property Key as Intger
get 'Elided for clarity
[code].....
I want to click this button Follow twitter in webbrowser
</div>
<div id="follow_actions_17852343" class="follow-actions YahooMovies">
<div class="follow-control">
<div id="follow_control">
[code].....
I cannot find a way to make a program that I write make a shortcut in the start menu for all users.My final goal is to make an MSI and deploy it in group policy to all users on a computers OU. Is this possible?
View 5 Replies