Is there any way to determine if the mouse scrolls up or down using the Mousewheel handler on a sub? [code]I want to be able to adjust the value of userzoom up or down according to if the mouse is wheeled up or down.
View 2 Replies
i created a datagridview whcih i am populating from a DB table.unfortunately i had to cancel the scroll bar's and lost the ability to scroll down using the mouse wheel.i was able to create a new handler to handle mouse wheel Under the form load event [code]but i still can't scroll down, and i am a bit lost.
View 4 RepliesWhen I look on the Internet I find many want to know how to get MouseWheel events with a UserControl.I'm getting scrolling with the mouse wheel and don't know why.It doesn't seem to be the default since I have other usercontrols that do not respond the the mouse wheel.In one UserControll I find if I move the mose wheel the contents moves. Actully moves too much for good viewing.I've searched the code for "Wheel" - no hits. Also for e.Delts - no hits. Finally I tried:
[code]...
Commented out as shown I do not get the unwanted mouse moves.If I remove the apostrophe I do get them.
Questions:
Is it OK to not call the Base sub in some cases?How do I find out if it is OK? (For example I don't imagine you'd want to not call it in New()Secondly and most important, What is going on? Why and I getting scrolling with the wheel in a Usercontrol and not getting it in other UserControls?
After scouring the articles online I have come up with this design for a winforms based touchscreen app that needs smartphone like scrolling. The app itself will run on a tablet laptop or touchscreen desktop.I put everything I want to scroll on a panel. Set autoscroll to true (which will show scrollbars)Now put this whole panel inside a groupbox.Shrink the groupbox until the scrollbars are hidden (visually hidden, not visible = false)
Now the fun part I am stuck at.I think I have to handle the mousedown, mouseup & mousemove on the panel to set the autoscrollposition so that when someone touches the panel and drags, it does it's scroll magic. Please help fill in the few lines of code in below method stubs. The msdn doc on autoscrollposition is very confusing since it returns negative numbers but needs to be set to positive with abs and what not.
Point mouseDownPoint;
Point mouseUpPoint;
Point mouseDragPoint;[code]......
I currently have a label scrolling text, But for some reason it only displays Certain song titles/text. Does Anyone know why?!
Private Sub Button3_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button3.Click
OpenFileDialog1.ShowDialog()
AxWindowsMediaPlayer1.URL = OpenFileDialog1.FileName
[code]....
I have a usercontrol I created. I added a panel and a vertical scrollbar to the right of it. I'd like to be able to scroll it with the mousewheel. The problem is there doesn't seem to be any events that fire on mousewheel. If I take the panel off then the usercontrol has focus and it will fire on mousewheel in the form. But with the panel on it doesn't seem to fire the mousewheel event of the panel, or the usercontrol within the control or even on the form. The best solution would be to have an event fire in the usercontrol but I'd even accept an event on the form and feed it back into the usercontrol.
I'm using vb.net and vs2005 if it matters.
I can send global mouse click and mouse move, but how can I send a global mousewheel that I don't know which window or control was focused? Is that something doing with SendMouse?
View 1 Repliesthe MouseWheel event triggers 3 times every time i scroll ... this i believe is because i have my wheel set in windows to scroll 3 lines at a time but i am updating a "zoom" and only want it to trigger 1ce per wheel movement any ideas?
View 9 RepliesHow do I code to scroll the panel using the mouse wheel when the mouse pointer is over the panel using the actual scrollbar?
View 1 RepliesI have a Panel set to Auto Scroll and a Picture Box inside of the Panel that's set to Auto Size. I can use the scroll bars, but why wont my mouse wheel scroll the panel up and down?
View 4 Replieshow do I disable the mousewheel scroll for a combobox. alternatively I don't mind if I can make it keep its original text without actually disabling mousewhell scroll
View 6 RepliesHow can I let the user still scroll with their mousewheel when scrollbars in my webbrowser are disabled?
View 6 RepliesHow do you move the selected row to the next row using the wheel mouse in a datagridview?
View 2 RepliesIs it possible to get the MouseWheel event from an Interoped ActiveX Control?
I have a DXF Viewer (with measure) control I wrote in VB6 that is quite frankly... Huge. It would take an inordinate amount of time to rewrite the whole thing and supporting tools in VB.NET. The MouseWheel event is used to Zoom in and Out. The control has a MouseWheel_Input() method to accept MouseWheel data from the host.
I added all the VB6 Mouse events, the Enabled Property, and The ActiveControl Property in VB6. Recompiled and registered the control on my VB.NET development machine. Added the control to my new VB.NET project and verified it has a focus method.
how to make the preview scroll (smoothly) with the mousewheel?
Private Sub print_preview_MouseWheel(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles print_preview.MouseWheel
If e.Delta............???
End Sub
I'm developing User Control. It have many picture box and I use MouseWheel event on every picture box. Why MouseWheel event work only after every picture box was selected?
View 6 RepliesI've dynamically added 20 pictureboxes to a panel and would like to see the panel scroll when I use the mouse wheel. To implement this I have tried to set the autoscroll to true on the panel control. Here is the code.
For i As Integer = 1 To 20:
Dim b As New PictureBox()
b.Image = Nothing
[Code]....
It works for "button" control, but not for the "picturebox" or "label" controls?
How can I implementthe scrolling affect using 'mousewheel'?
I have been trying to implement the jQuery weekcalendar using .net. What I can't seem to figure out is why weekcalendar states events.events is undefined after I make an ajax call to a webmethod I created which returns JSON. Below is the relevant code:
[Code]...
I want to make Keybord events and mouse events for learning and educational Purpose.
1. In Form any object like A "picture box" move by Arrow keys .
2. Picture Box Contain many Picture i want change Picture With next and Previos By Arrow keys.
3. I contain Voice of alphabet in Mp3.When i Press any button in textbox then its work.
4. Mouse Pointer Change My Own.
5. I click any Object or any thing By mouse its noice clicking sound like Tik Tik Tik.... Question No 3 is very hard to do . but not im possible
I am writing a simple program to perform a task at work. It is an update application that will allow end users to update software themselves.I have come up against a problem though. In order to fully complete the installation, the latest service packs have to be installed. The machines are either running XP or 2000 and need updating to the latest service packs.The problem is I cannot find any code that will let me determine the service pack, all I have is:
HTML
MsgBox("Computer's operating system version: " & _
My.Computer.Info.OSVersion)
This finds the OS version, but I don't seem to be able to determine the SP from it. What I need to do is make a piece of code that will find the OS and SP, and then download the latest SP.The service packs are as follows: 2000 needs SP4 and Rollup 1 and XP needs SP3. I value will need to be returned and then stored to create and IF statemenet, but I am stumped on how to find the SP.
In my code behind I'd like to be able to tell that I'm running my web site project in Visual Studio (either Debug or Release).I was considering testing for "localhost" but that's not perfect because we could be testing it locally on the server.
View 3 RepliesIs there any easy way to determine the IP address for the computer that an app is running on. I looked through the System.Net namespace and didn't see anything of the sort.
Basically, I want to display the IP address to the user, instead of walking them through how to do an "ipconfig". They then can put that IP address into another app, so the one app can talk to the other via UDP.
I have a dataset that is filled by a tableadapter and what I'm trying to do is to figure out how to loop through all of the rows in my dataset and determine when someone hasedited/changed the row and then
View 2 RepliesI have written simple code to determine country location using the suffix on the url eg..cn, .se, .br etc. even if its possible to determine country or location using urls that end in .com or .net? I was just reading up on something and found online apps that can determine location/country from the ip so how would I determine the ip or look it up using the url? can I do this in .net?
OK
So I have the following code and I get an exception when the url is invalid or faulty, can anyone help me to catch the error and add the url to another list and continue with my loop.
Public Sub getIpAddress(ByVal querylist As ArrayList)
Dim IPList As New ArrayList
Dim badList As New ArrayList[code].....
My current situation is a brain teaser for me, and I wish I could provide code that I have tried but quite frankly - i have no idea how to even start. So this is my situation; I have a tab control, this tab control holds the names of Departments for a Lay-Away manager. The user has the option to click a static tab, "New.." and add a new department. When that happens, the new tab controls name is added to the settings, and a new list-view is created, and named "lst & DepartmentName". The problem is, I have no way of knowing when the Double_Click event of the this list that may, or may not exist happens. I have a method of determining which list is currently active, working with a timer to set a certain value the name of the list, sort of like
Dim lst = GetAllList(TabControl1.SelectedTab)
cList = lst.Item(0)
Considering there is only one listview per tab, it will always be 0. So, question is - How could I determine when that particular listviews Double_Click event happens ? Then I will use it to call a certain Button_Click event?
Through ACL I could restrict access to a directory in an NTFS-Formatted USB, what I want to do now is to be able to check if any virus/malware tried to infect my folder so I will know if it is safe to unlock the folder in that machine, is there any way in .Net that I can do this?
View 1 RepliesHow can I determine which box a user has chosen from the points array I stored it in? EX:
Points.add(box1)
Points.add(box2)
Points.add(box3)
User selects box2
How can I determine from the points array(x) which box he chose?
im using VB 2008 is it possible to get active window name or id? for example i have active notepad window, now how i can get it's process name or process ?id(better is process id)
View 1 RepliesIm creating a program that auto starts with my computer. On this program im adding a section that states how much space i have left on the C: drive. So far i have 2 labels and a progress bar. in the top level i have the name of what the progress bar is, and the second below the progress bar states the amount such as this "430GB/740GB". i also want the progress bar to state the percent of how full this drive is. how can i do the following:
Determine the amount of drive space on C:
Determine the amount of free space on C:
Make free space a percent of all space. such as "30% full"
I'm converted a VB6 project to vb.net using the convert tool.Now i have a few declares that included passing variables as "as any" which vb.net doesn't like and it seems you have to declare them as there correct type so i have the following,So i suppose , Long and Long
Private Declare Sub CopyMemory Lib "kernel32" Alias "RtlMoveMemory"(ByRef Destination As Any, ByRef Source As Any, ByVal Length As Integer)
and
Long again?
Private Declare Function CallNextHookEx Lib "user32" (ByVal hHook As Integer, ByVal nCode As Integer, ByVal wParam As Integer, ByRef lParam As Any) As Integer
