the MouseWheel event triggers 3 times every time i scroll ... this i believe is because i have my wheel set in windows to scroll 3 lines at a time but i am updating a "zoom" and only want it to trigger 1ce per wheel movement any ideas?
View 9 RepliesI use the following code in a Sub called "updateDb" to accept changes back to the Db, etc. in the .CellEndEdit event from a DataGridView:
Try
' Write changes back to actual .mdb file
' Accept changes from DataGridView object
Me.Validate()
[code]....
Which is the most appropriate event to handle for this task? Right now I'm calling the updatedDb sub when the .CellEndEdit event triggers and when the .UserAddedRows event triggers.
I want to enlarge an image, possibly up to 32 times or 64 times bigger than original dimensions (so that the user can see each pixel) if possible. The following is a simple function that I have to enlarge an image.
Private Function xEnlarge(ByVal Source As Image, ByVal Rate As Double, Optional ByVal Quality As Drawing2D.InterpolationMode = Drawing2D.InterpolationMode.HighQualityBicubic) As Image
[Code].....
I have a usercontrol I created. I added a panel and a vertical scrollbar to the right of it. I'd like to be able to scroll it with the mousewheel. The problem is there doesn't seem to be any events that fire on mousewheel. If I take the panel off then the usercontrol has focus and it will fire on mousewheel in the form. But with the panel on it doesn't seem to fire the mousewheel event of the panel, or the usercontrol within the control or even on the form. The best solution would be to have an event fire in the usercontrol but I'd even accept an event on the form and feed it back into the usercontrol.
I'm using vb.net and vs2005 if it matters.
When I look on the Internet I find many want to know how to get MouseWheel events with a UserControl.I'm getting scrolling with the mouse wheel and don't know why.It doesn't seem to be the default since I have other usercontrols that do not respond the the mouse wheel.In one UserControll I find if I move the mose wheel the contents moves. Actully moves too much for good viewing.I've searched the code for "Wheel" - no hits. Also for e.Delts - no hits. Finally I tried:
[code]...
Commented out as shown I do not get the unwanted mouse moves.If I remove the apostrophe I do get them.
Questions:
Is it OK to not call the Base sub in some cases?How do I find out if it is OK? (For example I don't imagine you'd want to not call it in New()Secondly and most important, What is going on? Why and I getting scrolling with the wheel in a Usercontrol and not getting it in other UserControls?
I can send global mouse click and mouse move, but how can I send a global mousewheel that I don't know which window or control was focused? Is that something doing with SendMouse?
View 1 RepliesHow do I code to scroll the panel using the mouse wheel when the mouse pointer is over the panel using the actual scrollbar?
View 1 Repliesi created a datagridview whcih i am populating from a DB table.unfortunately i had to cancel the scroll bar's and lost the ability to scroll down using the mouse wheel.i was able to create a new handler to handle mouse wheel Under the form load event [code]but i still can't scroll down, and i am a bit lost.
View 4 RepliesI have a Panel set to Auto Scroll and a Picture Box inside of the Panel that's set to Auto Size. I can use the scroll bars, but why wont my mouse wheel scroll the panel up and down?
View 4 Replieshow do I disable the mousewheel scroll for a combobox. alternatively I don't mind if I can make it keep its original text without actually disabling mousewhell scroll
View 6 RepliesIs there any way to determine if the mouse scrolls up or down using the Mousewheel handler on a sub? [code]I want to be able to adjust the value of userzoom up or down according to if the mouse is wheeled up or down.
View 2 RepliesHow can I let the user still scroll with their mousewheel when scrollbars in my webbrowser are disabled?
View 6 RepliesHow do you move the selected row to the next row using the wheel mouse in a datagridview?
View 2 RepliesIs it possible to get the MouseWheel event from an Interoped ActiveX Control?
I have a DXF Viewer (with measure) control I wrote in VB6 that is quite frankly... Huge. It would take an inordinate amount of time to rewrite the whole thing and supporting tools in VB.NET. The MouseWheel event is used to Zoom in and Out. The control has a MouseWheel_Input() method to accept MouseWheel data from the host.
I added all the VB6 Mouse events, the Enabled Property, and The ActiveControl Property in VB6. Recompiled and registered the control on my VB.NET development machine. Added the control to my new VB.NET project and verified it has a focus method.
how to make the preview scroll (smoothly) with the mousewheel?
Private Sub print_preview_MouseWheel(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles print_preview.MouseWheel
If e.Delta............???
End Sub
I have this question about the control triggers, I have this project that have textbox, using it's textChanged function and setting the autopostback in to true.
Now, when I trace the command I have notice that the function have been triggered twice, and I just want to know now how that happens and how I can set this to trigger only once.
Is it possible to list all triggers in all tables on a database?I can list all user stored procedures with:
Private Sub StoredPro()
Dim theServer As Server = New Server(serverName)
Dim myDB As Database = theServer.Databases("mydatabase")
Dim dt As DataTable = myDB.EnumObjects(DatabaseObjectTypes.StoredProcedure)
End Sub
But nothing obvious in SMO for triggers. (I'm actually trying to list just custom triggers, any that are not named DEL_tablename, INS_tablename, UPD_tablename) within the selected database.
I'm developing User Control. It have many picture box and I use MouseWheel event on every picture box. Why MouseWheel event work only after every picture box was selected?
View 6 RepliesI've dynamically added 20 pictureboxes to a panel and would like to see the panel scroll when I use the mouse wheel. To implement this I have tried to set the autoscroll to true on the panel control. Here is the code.
For i As Integer = 1 To 20:
Dim b As New PictureBox()
b.Image = Nothing
[Code]....
It works for "button" control, but not for the "picturebox" or "label" controls?
How can I implementthe scrolling affect using 'mousewheel'?
I have a custom class. I would like to add an event that triggers when the form it is on resizes. Is there a way to do this?
View 1 RepliesI am using an activeX control to read data from an external source. This data is processed in 5 second increments. Each piece of data is passed through an event. When the event triggers I call a "decision" procedure from the event to process the data and make decisions on what to do, i.e. call other procedures, store the data, etc... This works fine when I have a small number of samples (around 10), however, when the number of samples increases to say 100, that is I am recieving 100 pieces of data every 5 seconds, the "decision" procedure does not fully run. Is it possible that the event trigger is causing the code to exit the "decision" procedure prematurely? I know that the "Decision" procedure starts since I have written data from the beginning of the procedure but not the end of it. how to handle the rapid event triggers?
View 7 RepliesAnyone know how to make the return key used in a text box trigger an event?
View 3 RepliesI am currently rewriting an Access application to VB. The database was already MySQL 5 with the Access application - solely used for the forms and reports. In access the MySQL database is accessed though ODBC, in VB via a .NET connector.
The problem is the following:
In the MySQL DB I have a trigger to create a UUID (or a GUID if you prefer) as a "Before Insert" trigger.With Access, the record creation works fine, and the UUID is created flawlessly.With VB, the record creation is stopped by VB when trying to insert/save the record - saying the DB requires the field UUID not to be null. Although this is right (it is mandatory in the record creation in the DB), it obviously does not take into account the MySQL trigger (and how could it?).How do you get rid of the validation for this field?
I have just started using vb.net and I have a checked list box with times throughout the day shown as
00:00 - 00:14
00:15 - 00:29
00:30 - 00:44
00:45 - 00:59
What I am trying to find is a way to get the current time and find which list item it fits into. What I think I need to do is to first of all get the current time and then go through the list splitting each item into 2 times and seeing if the current time fits. For example: Split the item 00:00 - 00:14 to 00:00 and 00:14 and then check if the current time is more than 00:00:00 but less than 00:14:59 and if so do certain task.how to go about taking each list item and splitting it into 2 separate times so I can check between them?
I have a datagridview which is populated from the SelectionChangeCommitted event of the combobox. The datagridview contains both bound and unbound data columns (see below).
View 1 RepliesIn my master page there is a submit button for the site search. On most pages this is only triggered if enter is hit whilst the search box has focus. On a couple of pages though hitting enter on the main form it triggers the search submit. I know that I could fix this by enclosing the search in it's own form tag and then changing every page to have it's own form tag, but I need something that is a lot simpler as a fix as I'm low on time. Is there a way I can tie the text boxes in the form to the correct submit button?
View 1 RepliesI found this mystifying in VB6 and it's still here...
For example - I have a combobox on a form and I have put some code in its SelectedIndexChanged event. The problem is that I want this code to be executed *only* when the user clicks on an item in the combobox dropdown. Why is it then that it gets executed when the form first loads? And how do I stop this happening?
I used to use a "FormLoading" boolean to decide whether or not the code was executed but this surely shouldn't be necessary. Is there a better way?
I have a class in VB.NET that has a method (called CurrentValue) that returns a number. There is also an event that the class raises to indicate the number has changed. In the event handler on my form, I update a textbox using the exposed method.[code]When I run this I get a "Debugger.Runtime.CrossThreadMessagingException" error. What could be doing this? I am instantiating MyClass in the same form that contains the textbox.I can also set properties of the MyClass object without any trouble.
View 1 Replies[code]I get an error that the connection to the IMAP server has disconnected because the suspend event is not triggered until the computer wakes. How do I get the trigger before the computer sleeps?
View 2 RepliesI have a program that will print dwg and idw drawings to different printers. from our drawing vault we kan use a plotbutton which creates a pcf-file (text file) and copies the drawing to a specific location. the program reads the pcf file which contains the max printsize for the drawing, who is printing it, nr of copies, location of the drawing. all data is written to or read from a small database. as long as there are drawings the printing goes fine, they are listed in a datagridview on the form. As soon as the last record is removed from the datagridview I get the following error[code]...
View 2 Replies