I have a master file and a reference file
The outcome i need is a record of matches and also non matches from the reference file
Using a loop and conditional i can find the matches
[Code].....
so far i got
code
For Each item As Reflection.FieldInfo In GetType(NameSpace.ClassWithNestedClasses).GetFields
rtfAppend(item.Name & ":" & Tab & item.GetValue(Me))
Next
For Each item As Reflection.PropertyInfo In GetType(NameSpace.ClassWithNestedClasses).GetProperties()
[code]...
which gets me the simple string vars and properties of my top class, but how can i apply this to loop through all sub classes and get there vars and props?
I have several text boxes I need to validate. I am not understanding how to validate in Visual Basic 2008. So I deployed standard If Statements to handle bad data. I am having two problems.
Lets say the user entered wrong data, example, numbers; an error message is displayed. The text boxes cannot contain numbers, be left empty or contained characters, like !@#$. The problem is if the user enter text, and then entered a wrong data again the code does not work or display error message. How can I make the conditions so that they throw out error message even if the user had previously entered good data.
Another example: If the user enter good data in text box 1 and bad data in text box 2, the error message does not work.
Finally, how do I filter out characters to allow only text. Is there a way to use this code on multiple text boxes with out writing the entire code for each form control?
Here are the conditional statements.
Private Sub btnDataSubmit_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnDataSubmit.Click
If IsNumeric(txtDataEntry.Text) Then
lblErrorDisplay.Text = "Invalid Name!"
lblErrorDisplay.BackColor = Color.Red
[Code] .....
how do i get out of nested for or loop in vb.net?
I tried using exit for but it jumped or breaked only one for loop only.
how can i make it for the following:
for each item in itemList
for each item1 in itemList1
if item1.text = "bla bla bla" then
[Code].....
I intended to do another SQL query inside here and retrieve data from another table by using the "category_id".I know the problems that asp.net required me to close the data reader before proceed to another query. But is there any solution for me to do another query and open another data reader within the opening data reader? [code]
View 2 Replieshow to create this sequence using a for loop and/or nested for loops?
1
2
3
[Code].....
Looking on different sites, i'm getting difficulty in understanding nested for loop. About how it works?
View 8 RepliesDim cv As Integer
Dim cc As Integer
Dim CurrentValue As Double
Dim ObsoleteValue As Double
[code]....
Basically this code works for the first column of the DataGridView. It sort of stops iterating after the last calculation of the row is performed and doesn't change the cc value at all. Meaning the loop gets stuck after the first iteration.
I'm comparing a temporary table to an another table, to check for changes in the cells. The way I'm doing it, is that I'm using three loops; one to loop trough the temporary, one to loop trough the other table and a last one to loop trough each column. Here's the
vb.net
For Each row As DataRowView In View
For Each drow As DataRowView In view2
[Code]....
"emitid" is the column I use as a reference to be sure that I'm comparing the correct rows, and the column order will always be the same in both tables.
I'm trying to make a simple game tree.Previously I used nested loops:
[Code]...
OK, after trying to get this working for a couple of days now I decided that I would turn to the experts here. I am trying to create a nested loop with a variable amount of nests. Let me elaborate. I have a program that first asks for the minimum and maximum amount of loops, I currently have a SELECT CASE statement that addresses each level of nesting individually.
Dim cMin As Integer = InputBox("Min")
Dim cMax As Integer = InputBox("Max")
Dim c1, c2, c3 As Integer
[Code].....
I'm gathering a list of files within a directory and then adding them to a ListView:
VB.NET
For Each f In Directory.GetFiles()
Dim lvi As New ListViewItem
lvi.Text = f.Name
[code]....
The exclusion list works great, but it duplicates each item in the ListView several times. How many depends on how many items that it excludes.
I understand why it's happening, but I can't figure out a way around it. I have to loop through the items in the ArrayList so that I can compare them to the other items.
So I have some vb.net code, and I have a nested For loop inside a For loop, and then I have EXIT FOR statement, will it break out of one loop, or the whole chain?
View 2 RepliesMakes the following statement about the code below:
**"The computer evaluates the loop condition in the Do...Loop statment to determine whether the loop instructions should be processed. In this case, the inputsales <> String.Empty condition compares the contenst of the input sales variable to the String.Empty value. As you know the String.Empty value represents a zero length, or empty, string if the inputsales variable is empty, the loop condition evaluates to True and the computer process the loop instructions. *If on the other hand the inputsales variable is not empty, the loop condition evaluates to false and the computer skips over the loop instructions.
Based on the code I think it is the opposite: ...that while the inputsales value is not empty it should evaluate to true and process the loop and if it is empty it should evaluate to false and skip the loop?
See below.
Option Explicit On
Option Strict On
Imports System.Globalization
[CODE]...
The template I use for all of my pages looks at the style.css to get the header image. I want to change it so that it looks at who logs in and displays an image based on who they are.
View 3 RepliesIs there a way to set a variable in VB.NET in an IF statement. I would like to do the following:
[Code]...
Is there some way I can get the last "ElseIf" to work? I know I can re-write it to get it to work but is there some syntax that will make it work the way it is?
In this query against a datatable i'm trying to do some conditional filtering.The check against Timeband(index N) should only be done when the Index exists. (the base code only had three item fields, i've converted them to a simple list)
Dim res As DataTable =
(
From dr As DataRow In dtTimedRow.AsEnumerable()
Select dr
[code]....
The above code triggers an Exception if the count = 1. It executes the code next to imeBands.Count > 1 which it should not. What would be the correct solution for this code.In the mean time i've added a simple filter function.
I am very new to VB and was thrown into the water with a very big project done in VB.What I am trying to do is this:1. The initial search is for locations within an area of 200 miles.2. If no locations are returned search for locations within 500 miles.Seems easy enough but I cannot seem to figure out how to do part two.If thunder.apps.ddr.franchiseconnect.bll.Current.Settings.Location.hasValue Then'we run this procedure to get the location's value from ZIP db for lat, long assignment
View 13 RepliesI have a javascript src that i need to add to some of the pages in a site.
for example <script type="text/javascript" src="http:abcxyz.com/zzz"></script>
I want to add this conditionally on a .ascx page - if the Request.ServerVariables["SCRIPT_NAME"] ends with certain criteria.
The ascx language is vb, and there is no code behind.
I have a datagrid in asp.net and vb.net, and i'd like to show the status of the item of a certain row with two possible icons.I have a function that checks validation and returns a boolean value that uses some fields of the datagrid.
View 2 RepliesimgTitle.Image = My.Resources.title
If imgTitle.Image Is My.Resources.title Then
MsgBox("Success")
Else
[code]....
I have some textboxes on a report in VB 2005. There are three "Status Types": A, B and C. I want an expression like this to work on a number of textboxes:
[Code]...
I have two combo boxes: cboRepairCategory (plumbing, landscaping, etc) and cboVendors. I am using Stored Procedures in SQL to store the data from my database and then load them into the combo boxes.The cboRepairCategory will be loaded first. Once the user has selected what type of repair it is I want it to restrict the amount of vendors that can be selected, so instead of saying:CREATE PROCEDURE dbo.up_Fill_Vendor_Combo
AS
SELECT VendorID, CompanyName
FROM Vendors
[code].....
I would select only the vendors that have the RepairType of say Landscaping, so thecboVendor would load now only Vendors with Landscaping instead of all vendors.My question is this: Is this done in SQL in my Stored Procedure or is it done in VB in my functions for my combo boxes. I've never tried this before I am totally lost on it. I have fiddled with the code on both ends but to no avail.
I have a DGV that is bound to an Access DB DataTable. I have added a column in the DB that is either a 0 or a 1. When the program loads, I want to change the backcolor and forecolor of each row based on the value of this column's cell. ie: a 1 makes the row red, a 0 makes the row green. this column would be hidden in the DGV.
Is this possible to do at runtime even though it is bound?
I'm not sure when I would actually do the color swap, formLoad?
Second question, as I iterate through each row of the DataGridView and need to change the value of this column, will this update my DB automatically, or do I need to call an update() after each row?
In Perl (and other languages) a conditional ternary operator can be expressed like this:my $foo = $bar = $buz ? $cat : $dog;Is there a similar operator in VB.NET?
View 2 RepliesI would like to set a conditional breakpoint with a string but it doesn't seem to work.
This is the code example:
For Each Elem in Elements
strMyString = Elem.Name
Next Elem
and in the breakpoint condition I wrote: strMyString = "Value"
I want to be able to call forth hundreds of different photos be selecting them from a listbox or something of that nature.
Normally, if I only had a few images, I would amke their visibility false and then use If statements to turn on their visibility once it is selected. However, putting hundreds of images on to a form and then changing their visibility, seems like a pain.
I was wondering if there is a way to call forth each photo within the resources folder when an item is clicked so I don't have to put each one directly on the form.
Quick question, of which the quickest and easiest answer may well be to rearrange related code, but let's see...So I have an If statement (a piece of code which is a part of a full working solution written in C#) rewritten using VB.NET. I am aware the VB.NET IIf(a, b, c) method evaluates both b and a regardless of the trueness of the first evaluation, but this seems to be the case in my standard construct, too:
If (example Is Nothing Or example.Item IsNot compare.Item) Then
'Proceed
End If
[code].....
In the members region I declare _Name and assign it the value "NameA" but how do I assign this value conditionally?The idea is that if in some file there's a value set than that should be the default value and not the hard coded one, if non is set the hard coded one should stick.
#Region "Members"
Private _Name As String = "NameA"
#End Region
#Region "Properties"
[code]....
How can you write a #If statement on a single line?
vb.net
#Const Debug = True #If Debug Then Console.WriteLine("Debug")'I also tried:#If Debug Then : Console.WriteLine("Debug") : #End If'
But that didn't work either?