I want to be able to call forth hundreds of different photos be selecting them from a listbox or something of that nature.
Normally, if I only had a few images, I would amke their visibility false and then use If statements to turn on their visibility once it is selected. However, putting hundreds of images on to a form and then changing their visibility, seems like a pain.
I was wondering if there is a way to call forth each photo within the resources folder when an item is clicked so I don't have to put each one directly on the form.
I have a gridview as shown below. When the EmpType is contract the EmpID must be masked as "XXX"; for regular employees, actual EmpID should be shown. Also, when it is masked, I need to add a button control in the EmpID column.I need to do it using mark-up; not using code behind. How can we write the conditional logic for Gridview's ItemTemplate for this logic?Note: .Net 4.0
So I'm writing the equality operator overload (Operator =())for a custom object, and the resulting mess of If conditionals is just an eyesore. But so far, it seems like the only sane way to check the values to as to match the specific behavior of this object.
The rules are:Num1 is required, period, and both the left and right operands and must be equal for True. Else, False.Num2 is optional, but if specified, must be present for both the left and right operands, and must be equal for True. Else, False.Num3 is optional, but can only be specified if Num2 is also present. Else, False.Num3, if specified, must be present for both the left and right operands, and must be equal for True. Else, False.
[Code]..
I also know that I could cache elements of the checks into booleans and then use those to reduce the amount of text. But that seems like a waste of cycles just for code readability. So I wanted to know if the SO community had better thoughts on reorganizing it, just in case I'm being too verbose with my checks.
The application uses ADO.NET to invoke sprocs for nearly every database operation. Some of these sprocs also contain a fair amount of domain logic. The data access logic for each domain entity resides in the domain class itself. ie, there is no decoupling between domain logic and data access logic. I'm looking to accomplish the following:
The idea is to scan a folder of images and then let the user navigate back and forth through the images using a couple of buttons.The problem is, I can only get it to return a single image, and not the whole lot. It's looks to me as though the images are getting assigned to the same index in the array. [code]
What type of connector do i need to actually save the Map data like point of the images (x,y coordinate) into the database . and then retrieve it to show on the page in asp.net and how do i go about doing it.
The app i am working on is for creating theme for the iPod touch... It has to deal with LOTS of images (100's potentially) There will be the set of default images, and then the user created replacement images. I started loading all the defaults into a resx file... thinking then I could just pull them out. now that I started setting the default, this sucks! lol the app will do this, on load it will set all the images (variables) to the resx images then when a theme is loaded, it will replace the default with the user image (if the user img exists) otherwise, the default stays. Then the "screen" is drawn to show the user. so, here is just the images to build the wallpaper, dock, and status bar...
I was thinking to make an app to save images [or download images] to local hard disk. But to keep it easy, I want this app to create a small picturebox on form to show the thumbnail of downloaded image. Lets say a 5 pictureboxes has to be added with the thumbnails to show the recent downloads. A user can save the location where he wants to save the files on hard disk. A listbox or a dropdown menu will help in categorizing the images, like image1 in friends section, image2 in family section, image3 in others, etc... When the program restarts all the latest 5 thumbnails has to be loaded in pictureboxes and the directory that was chosen. Finally, a button that shows the downloaded images into original image file size one by one or a slide show. Is it possible to make such program?
I am developing a visual basic 2008 express edtion program of an organisation that should get images from the system and display on image/picture box. further the program should save the displayed image in access database so that it can be retrieved together when you want to search the information about that particular employee.
The template I use for all of my pages looks at the style.css to get the header image. I want to change it so that it looks at who logs in and displays an image based on who they are.
I need this for my program. There is "add images" button where you can load multiple images and those images should be show on listview after loading.I have been trying to make this but could not get it work.
Is there a way to set a variable in VB.NET in an IF statement. I would like to do the following:
[Code]...
Is there some way I can get the last "ElseIf" to work? I know I can re-write it to get it to work but is there some syntax that will make it work the way it is?
In this query against a datatable i'm trying to do some conditional filtering.The check against Timeband(index N) should only be done when the Index exists. (the base code only had three item fields, i've converted them to a simple list)
Dim res As DataTable = ( From dr As DataRow In dtTimedRow.AsEnumerable() Select dr
[code]....
The above code triggers an Exception if the count = 1. It executes the code next to imeBands.Count > 1 which it should not. What would be the correct solution for this code.In the mean time i've added a simple filter function.
I am very new to VB and was thrown into the water with a very big project done in VB.What I am trying to do is this:1. The initial search is for locations within an area of 200 miles.2. If no locations are returned search for locations within 500 miles.Seems easy enough but I cannot seem to figure out how to do part two.If thunder.apps.ddr.franchiseconnect.bll.Current.Settings.Location.hasValue Then'we run this procedure to get the location's value from ZIP db for lat, long assignment
I have a datagrid in asp.net and vb.net, and i'd like to show the status of the item of a certain row with two possible icons.I have a function that checks validation and returns a boolean value that uses some fields of the datagrid.
I have some textboxes on a report in VB 2005. There are three "Status Types": A, B and C. I want an expression like this to work on a number of textboxes:
I have two combo boxes: cboRepairCategory (plumbing, landscaping, etc) and cboVendors. I am using Stored Procedures in SQL to store the data from my database and then load them into the combo boxes.The cboRepairCategory will be loaded first. Once the user has selected what type of repair it is I want it to restrict the amount of vendors that can be selected, so instead of saying:CREATE PROCEDURE dbo.up_Fill_Vendor_Combo
AS SELECT VendorID, CompanyName FROM Vendors
[code].....
I would select only the vendors that have the RepairType of say Landscaping, so thecboVendor would load now only Vendors with Landscaping instead of all vendors.My question is this: Is this done in SQL in my Stored Procedure or is it done in VB in my functions for my combo boxes. I've never tried this before I am totally lost on it. I have fiddled with the code on both ends but to no avail.
I have a DGV that is bound to an Access DB DataTable. I have added a column in the DB that is either a 0 or a 1. When the program loads, I want to change the backcolor and forecolor of each row based on the value of this column's cell. ie: a 1 makes the row red, a 0 makes the row green. this column would be hidden in the DGV.
Is this possible to do at runtime even though it is bound?
I'm not sure when I would actually do the color swap, formLoad?
Second question, as I iterate through each row of the DataGridView and need to change the value of this column, will this update my DB automatically, or do I need to call an update() after each row?
In Perl (and other languages) a conditional ternary operator can be expressed like this:my $foo = $bar = $buz ? $cat : $dog;Is there a similar operator in VB.NET?
Quick question, of which the quickest and easiest answer may well be to rearrange related code, but let's see...So I have an If statement (a piece of code which is a part of a full working solution written in C#) rewritten using VB.NET. I am aware the VB.NET IIf(a, b, c) method evaluates both b and a regardless of the trueness of the first evaluation, but this seems to be the case in my standard construct, too:
If (example Is Nothing Or example.Item IsNot compare.Item) Then 'Proceed End If
In the members region I declare _Name and assign it the value "NameA" but how do I assign this value conditionally?The idea is that if in some file there's a value set than that should be the default value and not the hard coded one, if non is set the hard coded one should stick.
#Region "Members" Private _Name As String = "NameA" #End Region #Region "Properties"
Is there a way to conditionally format an Excel Chart? For example I have a bar graph. Currently I have the bars a purple color. I would like to turn a certain bar red if it meets certain criteria. Is there anyway to do this?
